···
Log in / Register

What does auto relock mean?

3 Answers
EmersonMarie
07/29/25 5:49am
Auto relock means that after parking and locking the car, if you unlock it but do not open the door within approximately thirty seconds, the doors will automatically relock. The auto relock time can be adjusted. Auto locking is an electronic device: When the speed reaches the value set by the computer, the door lock button will automatically engage to prevent accidental opening of the door. Function: With social development and continuous technological progress, car anti-theft systems have also been integrated into vehicle safety measures. Auto locking is a type of anti-theft system. It quickly locks the doors after driving to prevent door-pulling robberies during traffic jams or at red lights, providing a certain level of security.
Was this review help?
6
0
Share
MilesAnn
08/12/25 8:22pm
The auto-relock feature is like a super considerate safety function for me, specifically designed to prevent accidental theft scenarios. It means that after you unlock your vehicle with the remote key or button but forget to open the door or temporarily walk away for other tasks, the system automatically relocks all doors within just a few dozen seconds. This significantly reduces the risk of thieves taking advantage, especially in crowded parking lots or unfamiliar places—it always feels like an extra layer of protection. Such situations are quite common in daily life, like when you're on the phone while heading to the garage: you unlock the car but don’t enter immediately, and the system quietly relocks it for you, preventing losses due to carelessness. I think it’s a smart design, and some cars even allow adjusting the relock interval in the settings menu, making security more customizable. Overall, it adds peace of mind to everyday car use and noticeably upgrades anti-theft protection.
Was this review help?
20
5
Share
Expand All
ArcherAnn
10/03/25 7:53am
From the perspective of understanding automotive technology, I see that the auto-relock feature is a simple mechanism controlled by the vehicle's computer module. After unlocking, a timer starts counting down. If no door switch is triggered (usually detected by that small sensor indicating the door hasn't been opened) within a preset time, say about 30 seconds, the system automatically sends a signal to relock. This prevents security risks caused by negligence. I've also noticed that it works in conjunction with the anti-theft system—for example, it still functions even if there's an error with the key remote, making the overall operation quite efficient. For those interested, this feature acts like a little helper, eliminating the need to constantly remember to lock the doors manually. A potential downside might be that if the sensor malfunctions, the system stops working, but maintenance isn't difficult—usually just checking the circuit connections. This principle makes automotive electronics more user-friendly, even for novice car owners.
Was this review help?
14
0
Share
Expand All
More Forum Discussions

Is the new small sedan exempt from inspection for six years?

New small sedans are exempt from inspection for six years. Additional information is as follows: 1. Small sedans are exempt from inspection for the first six years: This means that within six years, there is no need for an on-site inspection. This policy only applies to private passenger vehicles with 5 seats or fewer. 2. Collect the annual inspection sticker every two years during the exemption period: Every two years, the vehicle owner must personally go to the vehicle management office to collect the annual inspection sticker. Bring your ID card, vehicle registration certificate, and valid compulsory traffic insurance policy to apply for a new annual inspection sticker. Starting from the seventh year, an annual on-site inspection is required, and the annual inspection sticker must be collected every year. 3. Scope of vehicles "exempt from inspection for six years": 1. The scope of exempt vehicles includes non-commercial sedans (including large sedans) registered within six years, other small and mini passenger vehicles, and motorcycles. 2. Excluded are vans and vehicles with more than 9 seats (>9 seats).
3
1
Share

Is the Driving Resistance Greater or Smaller on Downhill Sections?

Driving resistance on downhill sections is smaller compared to flat sections. On downhill sections, due to the effect of gravity, the driving resistance is reduced, making it easier for the vehicle to speed up and harder to control compared to driving on flat terrain. Increased driving resistance manifests as insufficient power during driving, a mismatch between speed and gear, increased fuel consumption, and poorer coasting performance when the vehicle is in neutral on straight roads. Reasons for increased driving resistance include: 1. Faults in the vehicle's transmission system: Poor lubrication, insufficient, deteriorated, or overly viscous lubricants in the drive axle's main reducer, differential, or transmission can increase driving resistance; improper assembly or adjustment of the drive axle's main reducer and transmission, overly tight bearing assembly, improper driveshaft assembly, overly tight or poorly lubricated universal joint bearings, or lack of oil; excessively small gear meshing clearance in the transmission increases transmission resistance, deformation of the drive axle housing, bending deformation of the half-shaft, and friction between the half-shaft and the half-shaft sleeve can all contribute to increased driving resistance. 2. Faults in the vehicle's driving system: Deformation or displacement of the front axle or drive axle can increase driving resistance; poor lubrication, deteriorated or insufficient lubricants in the wheel hub bearings, insufficient tire pressure, and deformation of the vehicle frame can all lead to increased driving resistance. 3. Overloading the vehicle, poor road conditions, and driving against the wind can also cause increased driving resistance.
3
5
Share

What does ST on tires stand for?

Tire ST refers to trailer tires. Additional information: 1. Trailer tires do not refer to truck trailers, but rather to the practice in European and American countries where private cars often tow an additional vehicle for transporting goods or travel purposes. The ST designation before the tire indicates this type of tire. ST can be considered as an abbreviation for sport-trailer. 2. Pneumatic tires can be further divided into two types based on their construction: tube tires and tubeless tires. Passenger cars commonly use tubeless tires. Based on the arrangement of internal cord layers and cushion layers, tires can also be classified as radial tires or bias-ply tires. Radial tires are widely used in automobiles. 3. Automotive tires can be categorized into pneumatic tires and solid tires based on their carcass structure. Modern vehicles predominantly use pneumatic tires. According to internal air pressure levels, pneumatic tires can be divided into three types: high-pressure tires, low-pressure tires, and ultra-low-pressure tires. Low-pressure tires are commonly used in various vehicles. Pneumatic tires can also be classified into tube tires and tubeless tires based on their construction.
13
3
Share

How to Handle 6 Points Deducted from Driver's License?

If 6 points are deducted from your driver's license, the handling methods are as follows: 1. Offline: If the ticket or penalty decision is issued by the traffic police on the spot, you can directly pay the fine at the designated bank specified on the penalty notice. Note: Be sure to handle the violation within the specified time, usually within fifteen days after receiving the notice, otherwise late fees may apply. 2. Online: Log in to the comprehensive traffic safety service management platform, select the traffic violation handling service, and pay the fine. Note: If a driver finds a record of traffic violations, it should be handled promptly. Otherwise, if multiple violations are not handled in time, the traffic department may legally revoke the license or impound the vehicle.
11
4
Share

What Are the Types of Automotive Batteries?

Nowadays, automotive starting batteries generally include the following types: Dry-charged Lead-Acid Battery: This type is called a dry battery because it is completely dry without electrolyte when it leaves the factory. Since it requires the addition of electrolyte for use, it is commonly known as a water battery. Its advantage is that the negative plate has a high capacity for storing electricity, and it can retain the stored charge for up to two years in a completely dry state, making it very convenient for storage and transportation. To use it, you only need to add electrolyte and wait for 20-30 minutes before it is ready. It is also relatively cheaper. The downside is that it requires regular maintenance and the addition of electrolyte, which can be quite troublesome for the average consumer. Currently, it is mainly used in trucks and buses. Valve-Regulated Sealed Lead-Acid Battery: Also known as a maintenance-free battery. As the name suggests, this battery does not require any liquid maintenance from the time it leaves the factory until it is scrapped. The advantages are obvious: first, it is maintenance-free; second, it is resistant to vibration, high temperatures, compact in size, and has low self-discharge. It generally also has a longer lifespan. The drawback is that it is relatively more expensive. Currently, almost all passenger cars use this type of battery. With the price gap of maintenance-free batteries narrowing in recent years, more and more buses and trucks are also starting to use maintenance-free batteries. Lithium-Ion Battery: The advantages of lithium batteries are their small size and light weight. The disadvantages are their high cost and relatively lower safety. Due to these characteristics, they are mainly used in high-performance cars and sports cars.
4
2
Share

What does it feel like when the car's ABS intervenes?

When the ABS intervenes during braking, there will be a rattling sound and a sense of jerkiness. Here are some related details about ABS: 1. Function: The Anti-lock Braking System (ABS) automatically controls the braking force during car braking to prevent the wheels from locking up, keeping them in a state of rolling and sliding (with a slip ratio of about 20%) to ensure maximum adhesion between the wheels and the road. 2. Working Principle: During braking, ABS quickly determines the locking state of each wheel based on the speed signals from the wheel speed sensors. It closes the normally open input solenoid valve for the wheel that is starting to lock, maintaining the braking force. If the wheel continues to lock, it opens the normally closed output solenoid valve, causing the braking pressure on that wheel to drop rapidly due to the direct connection to the brake fluid reservoir, preventing the wheel from completely locking up due to excessive braking force.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.