What does 'auto' mean on a car display?

1 Answers
SanAlex
07/25/25 2:36am
When 'auto' is displayed on a car, it means automatic, and the following are its meanings in different contexts: 1. If 'auto' appears on the air conditioning, it refers to automatic air conditioning. The driver sets the temperature, and the air conditioning will automatically choose between cooling or heating based on the ambient temperature and the set temperature, adjusting the fan speed automatically; 2. If 'auto' is on the light control, it means automatic lights. When the light switch is set to this position, the lights will not turn on during the day but will automatically turn on at night; 3. If 'auto' is marked on the window, it indicates that the window can be raised or lowered with one touch, eliminating the need for passengers to hold the button. For example, pressing the button down once will lower the window continuously, and lifting the button up once will raise the window continuously.
Was this review help?
12
3
Share
More Forum Discussions

Is the dashboard PPK the mileage?

Dashboard PPK value refers to the main parameter of the speedometer (pulses per kilometer), which is controlled by the instrument's software. This value affects the accuracy of the vehicle's speed display and needs to be adjusted with professional equipment. Related introduction: 1. Introduction: The dashboard (instrument-panel) is a rigid plate or structural component used to install instruments and related devices. According to the type, it can be divided into screen-type dashboard, frame-type dashboard, channel-type dashboard, and cabinet-type dashboard. 2. Extension: The dashboard can be equipped with external lighting and can also be attached to a control console. It comes in various forms and specifications, allowing for the installation of various instruments as needed, or combining various dashboards into a whole as required. The dashboard is sometimes a broad term, including panels, screens, cabinets, consoles, analog (semi-analog) panels, etc.
17
2
Share

What kind of car is the Shengmufeng?

Shengmufeng is a business vehicle. Here is more information about Shengmufeng: 1. Exterior: The Shengmufeng is fully customized with aerodynamic kits, featuring a brand-new three-dimensional Stellar Grid grille with 314 silver-plated elements that shine brilliantly under sunlight; the 18-inch custom floating forged alloy wheels are very stylish, with tire size 235/50R18 and Michelin Quiet Tire as the brand model. 2. Interior: The beige and navy blue two-tone design is complemented by nanmu wood trim, creating an excellent visual effect. The dashboard materials have been upgraded to higher-grade leather and solid wood, with perfect stitching and edge detailing.
6
0
Share

Is Oil Burning Common in Subaru Vehicles?

Oil burning is common in Subaru vehicles. A significant portion of Subarus experience oil burning issues, primarily due to the following reasons: 1. Adsorption: The use of horizontally opposed engine technology means that some oil adsorbed on the cylinder walls (within the piston ring gaps) can be drawn into the combustion chamber and burned. 2. Uneven Wear: Horizontally opposed engines can lead to uneven wear, which naturally results in oil burning. Additional relevant information includes: 1. Oil Consumption: During engine operation, a minimal amount of oil coating the cylinder walls will burn off, which is normal oil consumption. It's important to regularly check the oil level and top it up when necessary. 2. Repair and Restoration: After a certain period of engine operation, significant oil burning may occur due to wear on the cylinders, pistons, and rings, at which point the engine will require repair.
8
4
Share

Is it necessary to apply a front windshield film for cars?

It is necessary to apply a front windshield film for cars. Below are relevant details about car films: 1. Basic introduction: Car film is a product designed to provide heat insulation and UV protection for vehicles. The application of car film requires high technical and environmental conditions, such as a dust-free environment, specialized equipment, standardized operational procedures, and proficient skills. 2. Selection criteria: Light transmittance and clarity are the most important performance factors related to driving safety in car films. It is recommended that users avoid films with excessively low light transmittance. For window films, especially those for the front side windows, a light transmittance of over 35% is considered more suitable.
14
2
Share

What to Do If a New Battery Won't Charge After Long Storage?

If a new battery won't charge after long storage, you can use positive and negative pulse charging to depolarize the battery. Related information: 1. Prerequisites: Not all batteries can be repaired. Only when the battery's exterior is undamaged, not swollen, and shows no signs of short-circuiting or open-circuiting can positive and negative pulse charging be used for battery repair. 2. Key points: Before storing the battery, it must be fully charged. Under full charge, it is generally recommended to recharge the battery every 2-3 months, and ideally every 1-2 months if possible. Store the battery in a cool, ventilated indoor area. After fully charging the battery, disconnect the load wires. Due to the self-discharge of lead-acid batteries, sulfation can occur. If the battery is not recharged for a long time, it may become difficult to restore its capacity, thereby affecting its lifespan. Therefore, it is generally recommended to recharge the battery every 2-3 months to extend its service life.
8
1
Share

How to Repair Hail Dents on the Hood?

Hail dents on the hood can be repaired at a 4S shop or auto repair shop, usually through sheet metal correction methods. Related information: 1. Introduction: After sheet metal correction, there may still be some defects that cannot be fully compensated by sheet metal work. Even replacing with new parts may not achieve perfection. To attain a more flawless finish, sculpting techniques are employed to address these defects. 2. Expansion: After deformation or other damage, the flatness, wheel angles, and lines of the car need to be filled and shaped with filler. This can be summarized by the formula: filler application = restoration of body panels = mold product = mold processing procedure. Every body panel of a car is formed through mold stamping.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.