What does AUTO mean in car air conditioning?

2 Answers
OZoe
07/29/25 10:14am
The Chinese meaning of AUTO in air conditioning is automatic air conditioning mode. Generally set at 24 degrees Celsius, the air conditioning will automatically choose between cooling or heating based on the ambient temperature and the set temperature, and adjust the fan speed accordingly. Below are other common functions found in cars: 1. Electronic Parking Brake: Replaces the traditional hand-operated parking brake. Gently pulling the button upward will engage the parking brake, while pressing it downward will release it. 2. AUTOHOLD: Automatic Hold System. Its function is to hold the vehicle in place during stop-and-go traffic. When stopping at a red light, releasing the brake pedal will activate the automatic hold, locking the wheels until the accelerator pedal is pressed, at which point the wheels will automatically unlock. 3. Engine Auto Start-Stop: When the brake is fully depressed, the engine will automatically shut off, and when the accelerator is pressed to move forward, the engine will automatically restart, thereby achieving fuel savings. It is most commonly used when waiting at traffic lights. 4. ESP Electronic Stability Program: Automatically controls the vehicle's attitude, preventing rollovers, skids, and other loss-of-control situations at critical moments, significantly enhancing driving safety.
Was this review help?
6
4
Share
SanHailey
08/13/25 1:30pm
The AUTO button on the car's air conditioning represents the automatic mode. Once activated, the system automatically adjusts the airflow, temperature, and vent mode to maintain comfort. After starting the car, press this button and then rotate the temperature knob to set your desired ideal temperature, such as 24 degrees, and then you don’t need to do anything else. The system automatically monitors the interior temperature changes and adjusts the compressor power and fan speed accordingly—strengthening cooling when the sun is too strong and reducing airflow when the temperature drops. I love using this feature while driving because it eliminates the need for manual adjustments, allowing me to focus more on driving and relax. Occasionally, the automatic airflow may suddenly increase, producing noticeable noise, but this is normal as the system determines a need for rapid temperature adjustment. Nowadays, most cars come with this practical and intelligent design, making it hassle-free and smart.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

What Causes an Increase in Car Antifreeze?

Car antifreeze increases due to engine cylinder leakage, which is a dangerous situation where engine oil enters the coolant. Antifreeze is a crucial substance in the cooling system, circulating through the radiator and pipes to dissipate engine heat. Besides preventing freezing and cooling, it also has excellent properties such as preventing boiling in summer, rust removal, and corrosion resistance. Situations requiring antifreeze replacement: 1. The color of the antifreeze in the reservoir has changed, showing a noticeable difference from the original; 2. Sediments or floating impurities are visible in the antifreeze; 3. The antifreeze level exceeds the limit; 4. Instruments detect insufficient antifreeze freezing point; 5. The engine temperature is too high.
14
3
Share

What are the reasons for insufficient turbo boost pressure in the Jaguar XF?

Reasons for insufficient turbo boost pressure in the Jaguar XF: The air filter of the car's turbocharger is clogged, leading to increased air intake loss and insufficient boost pressure. Turbocharging is a technology that uses exhaust gases generated by internal combustion engine operation to drive an air compressor. The Jaguar XF is a mid-to-large luxury sedan from Jaguar, with dimensions of 4961mm in length, 1877mm in width, and 1460mm in height, a wheelbase of 2909mm, and a rear-wheel-drive layout. In terms of suspension, this car features a double-wishbone independent front suspension and a multi-link independent rear suspension.
6
1
Share

How to Fix Insufficient Cylinder Compression in a Car?

Methods to repair insufficient cylinder compression in a car: 1. Open the engine and remove the cylinder head to check if the valves are not sealing properly or if the valve seals are leaking, then replace the valve seals; 2. If the cylinder friction gap is too large and within repairable limits, you can install cylinder liners and then perform cylinder boring; 3. If there is piston ring blow-by, replace the pistons and piston rings with new ones. If insufficient cylinder compression occurs, it should be repaired at a 4S shop promptly. Insufficient cylinder compression can cause difficulty in ignition, incomplete combustion, engine shaking, and performance degradation. The vehicle's seals deteriorate with age, which is why the engine's performance declines over time.
5
1
Share

What is the body weight of the T-Cross?

The curb weight of the T-Cross is approximately 1.7 tons. Below is an introduction to Volkswagen: 1. Introduction: Volkswagen is an automobile manufacturer headquartered in Wolfsburg, Germany, founded by Ferdinand Porsche on March 28, 1937. 2. Brands: The company owns brands such as Audi and Volkswagen. In May 2021, Volkswagen Group ranked 17th in the '2021 Forbes Global 2000'. 3. Development: On March 28, 2018, Volkswagen officially released the official images of the Atlas Cross Sport concept car, which made its global debut at the 2018 New York Auto Show, and the vehicle was also mass-produced in the United States in the future.
3
4
Share

Where is the rearview mirror heating function located on the Tharu?

The Tharu's rearview mirror heating control switch is integrated with the side mirror adjustment function switch. Here is relevant information about the rearview mirror heating: 1. Principle: The heating principle for exterior rearview mirrors is quite simple and cost-effective. It works by embedding heating wires behind the mirror surface to ensure clarity. When activated, the heater quickly warms the mirror surface, gradually removing rainwater or fog, eliminating the need for frequent manual wiping by the driver and significantly reducing driving risks. 2. Limitations: During actual use, especially in rainy conditions, the exterior rearview mirror heating only provides partial effectiveness. This is because rainwater on the window glass can still obstruct the driver's view.
14
4
Share

How many kilometers can a Corolla shock absorber last?

Corolla shock absorbers do not have a fixed service life, as their lifespan varies depending on different driving habits. The shock absorber in a car is an important component of the vehicle's suspension system. Its function is to suppress the vibration and deformation absorbed by the spring, dampen the oscillation during spring rebound, and absorb impacts from the road surface. This directly affects the ride comfort and handling of the vehicle, which in turn can influence driving safety. The Corolla is a compact sedan launched by FAW Toyota. The dimensions of this car are 4635mm in length, 1780mm in width, and 1465mm in height, with a wheelbase of 2700mm. In terms of exterior design, the Corolla adopts the brand's new family design philosophy, featuring a large front grille that gives it high recognition. The lower front-end design enhances the car's grounded feel.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.