What does Audi's 'Kuachou' mean?

Can the car still be driven if the rear brake pads are completely worn out?

It is not safe to drive when the brake pads are completely worn out, and continuing to drive under such conditions is highly dangerous. Once the brake pads are worn out, every time you press the brake pedal, it can potentially damage the brake discs. Here are some additional details: Inspection: It is recommended that drivers regularly check the thickness of their brake pads and the condition of the brake discs during routine maintenance. If the brake pads are too thin, they should be replaced immediately. Generally, the front brake pads wear out faster than the rear ones. Brake fluid also requires frequent checks, as it is highly prone to absorbing moisture. If the moisture content in the brake fluid reaches 3%, it is advisable to replace the brake fluid immediately. It is recommended to measure the moisture content of the brake fluid during every maintenance session. Best to visit a 4S shop: If you live in a particularly humid area, the brake fluid is more likely to absorb moisture and deteriorate. When replacing the brake fluid, it is best to go to a 4S shop, as some small repair shops may not properly bleed the air from the brake system, which can reduce braking force, increase stopping distances, and compromise driving safety. When purchasing brake pads, it is also advisable to buy them from a 4S shop, as some repair shops may sell counterfeit or substandard products. If the original brake pads do not provide sufficient braking force, you can opt for higher-quality brake pads to significantly improve braking performance.

20

2

Share

How to Remove and Clean the Car Air Conditioning Filter?

Locate the black plastic panel above the passenger footwell, which has two retractable clips. Remove the plastic panel by releasing these clips. Disconnect the negative terminal of the battery, remove the body control module, and detach the mounting bracket of the body control module. Then, remove the panel on the left side of the passenger's left foot area and take out the air conditioning filter for cleaning.

16

0

Share

Are the doors of the Odyssey electric?

In the Odyssey, the door configuration varies by trim level. Higher trims feature electric doors, while lower trims likely have manual doors. Automatic Door Locking: The automatic door locking feature while driving can be configured through the central control screen. Also known as speed-sensitive auto-locking, this electronic system automatically engages the door locks when the vehicle reaches a preset speed to prevent accidental door openings. Activation of Automatic Locking: Settings vary by manufacturer. Some vehicles auto-lock upon reaching a certain speed, while others activate based on gear position (e.g., automatically locking when shifted to D gear).

13

4

Share

What to Do When You've Already Crossed the Stop Line During a Left Turn and the Light Turns Red?

If you have just exited the waiting zone and the light turns red, or if the front wheels have crossed the stop line when the light changes to red from green, you do not need to stop and wait. Pay attention to oncoming traffic from the side and complete the left turn safely. Generally, when the left turn signal turns red, vehicles that have already entered the waiting zone should complete the left turn as soon as possible.

1

3

Share

Does Engine Oil Need to Be Replaced?

Place the used oil container under the oil pan at the lower part of the vehicle's engine compartment. Use a specialized wrench to unscrew and remove the oil filter. Note that the location of the oil filter varies by vehicle model. Slowly loosen the oil pan drain bolt to release the old oil. After draining for a period of time, reinstall the drain bolt. Once fully drained, tighten the bolt, pour the new oil into the engine, and screw on the oil filter.

17

0

Share

How to fix unevenness after using a touch-up pen?

Soak 2000/3000 grit sandpaper in soapy water for 20-30 minutes to soften it. After the touch-up paint has dried, perform wet sanding. Use the pre-soaked sandpaper to sand the touched-up area in the same direction until it is level with the original car paint surface. If the car paint surface remains uneven after sanding, you can sand it again. Apply polishing wax to a dry cloth and rub it onto the touched-up area in a clockwise direction. After drying for one minute, wipe it clean.

10

4

Share

What does Audi's 'Kuachou' mean?

Can the car still be driven if the rear brake pads are completely worn out?

How to Remove and Clean the Car Air Conditioning Filter?

Are the doors of the Odyssey electric?

What to Do When You've Already Crossed the Stop Line During a Left Turn and the Light Turns Red?

Does Engine Oil Need to Be Replaced?

How to fix unevenness after using a touch-up pen?

How to Use Honda ECON Mode Correctly?

How to Check Vehicle Inspection Information?

What type of suspension does the Haval H6 have?

What does low engine coolant temperature mean?