What does Audi Q7 35TFSI mean?

1 Answers
LeMila
07/29/25 11:03pm
Audi Q7 35TFSI means the acceleration performance is 35% of the gravitational acceleration G; 'T' stands for turbocharging, which includes both turbocharging and supercharging; FSI belongs to direct fuel injection. The advantages of turbocharging include the following 4 points: 1. Increase engine power and torque: It can significantly improve engine power and torque without increasing engine displacement; 2. Good fuel economy: Since the exhaust pressure at low speeds is insufficient to drive the turbine, the fuel consumption level of a turbocharged engine under the same technical conditions is equivalent to that of a naturally aspirated engine of the same displacement; 3. Cost-saving: Turbocharged engines are smaller in size and simpler in structure, reducing R&D and production costs, which are lower than those of large-displacement naturally aspirated engines; 4. Meets the requirements of green travel: Turbocharged engines use turbo and supercharging technology, which reduces carbon monoxide, hydrocarbons, and particulates in emissions, benefiting the environment. Compared to naturally aspirated engines, turbocharged engines also produce less noise.
Was this review help?
8
3
Share
More Forum Discussions

What does the Jetta tachometer mean?

Jetta tachometer is located on the dashboard, with the unit of thousand revolutions per minute. Tachometers are commonly used in manufacturing industries such as motors, fans, papermaking, plastics, chemical fibers, washing machines, automobiles, airplanes, ships, etc. Most commonly used are handheld centrifugal tachometers. Tachometer measurement is essential in various fields of the national economy. The following are the working advantages of the tachometer: 1. Large static torque makes the pointer less prone to shaking, with strong anti-vibration performance. 2. It adopts a single-chip microprocessor through software design, so it has high precision and strong anti-interference ability. 3. The hour meter uses LCD display, without mechanical parts, so it is more reliable and more contemporary.
15
2
Share

Why Do Cars Frequently Have Low Tire Pressure?

Tire pressure can be low for many reasons, mainly including damage to the car tires and slow leaks caused by tire aging. Hazards of Overinflated Tires: The friction and adhesion of the tires will decrease, affecting braking performance; it can cause steering wheel vibration and deviation, reducing driving comfort; it accelerates localized wear on the central tread pattern, shortening tire lifespan; increased body vibration indirectly affects the lifespan of other components; excessive stretching of tire cords can reduce tire elasticity, increasing the load on the car while driving; puncture resistance decreases. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks or blowouts, leading to tire bursts. Hazards of Underinflated Tires: The friction coefficient with the road surface increases, leading to higher fuel consumption; it makes the steering wheel heavy and prone to deviation, creating unsafe driving conditions; increased movement of tire parts causes excessive rolling, leading to abnormal heat generation; it reduces the functionality of cords and rubber, causing delamination or cord breakage, and excessive friction with the rim can damage the bead area, leading to abnormal wear; friction between the tire and the ground multiplies, causing a rapid rise in tire temperature, softening the tire, and drastically reducing its strength. High-speed driving can lead to tire bursts; increased tire body deformation can cause sidewall cracks and flexing movements, leading to excessive heat, rubber aging, cord fatigue, and breakage, while also increasing the tire's contact area with the ground, accelerating shoulder wear.
3
2
Share

How to Reset the Maintenance Light on a Chery Car?

First, insert the key and press the small button on the right (the small black lever on the dashboard used for adjusting time and resetting the odometer). Then, turn the key to the ON position without starting the engine. Next, hold the small button for a few seconds before releasing it. After that, press and hold the small button again, gently turn it to the right, and release it to remove the maintenance reminder. Below is the function of the reminder indicator: 1. As driving time increases, the wear and tear on internal vehicle components gradually becomes more severe. To ensure normal vehicle operation, manufacturers have installed reminder indicators that alert the owner to replace certain parts after a certain mileage. After successful replacement, the maintenance light must also be reset. 2. These lights serve to record the mileage of important components, much like a timer in a sprint race, reminding both the owner and automotive maintenance personnel.
7
3
Share

Can the Hongqi HS7 go off-road?

Hongqi HS7 can go off-road. Here is the extended information: 1. The Hongqi HS7 is positioned as a mid-to-large SUV, with a wheelbase of 3008mm and dimensions of 5035mm in length, 1989mm in width, and 1756mm in height. The over 5-meter-long Hongqi HS7 is an absolute "big guy." The overall exterior design is also very imposing, including the vertical waterfall-style large grille, rugged hood lines, and side lines, exuding a strong masculine aura. 2. The interior adopts a symmetrical layout, and the materials used emphasize texture, with NAPPA leather and diamond patterns generously applied to the seats. At the same time, the dual touchscreen on the center console and the full LCD instrument cluster configuration significantly enhance the HS7's sense of luxury and technology.
5
4
Share

Method for Adjusting Valve Clearance on Sonata

Method for adjusting valve clearance on Sonata is introduced as follows: 1. Rotate the crankshaft to align the timing mark on the pulley with the reference line: This indicates the completion of the compression stroke for cylinder 1 or 4. If it's cylinder 1, you can adjust the valve clearance for valves 1, 2, 4, and 6, counting from the front of the engine. 2. Insert a feeler gauge of the specified thickness between the valve stem and rocker arm: Pull it back and forth gently. When you feel slight resistance, the thickness is just right. 3. Loosen the lock nut during adjustment: Turn the adjusting screw, insert the feeler gauge into the gap, and pull it back and forth. If you feel resistance, the clearance is correct. Secure the adjusting screw and recheck once. If the clearance changes, readjust. 4. After adjusting the valves, rotate the crankshaft one more turn: Align the mark on the flywheel again with the reference line on the flywheel housing window.
9
4
Share

Is Engine Noise Related to Engine Oil?

Engine noise is related to engine oil. Here are the relevant details: 1. Engine Oil: Using engine oil mixed with impurities can affect the normal operation of the engine. When such oil burns, it can cause carbon buildup in the engine. To resolve this issue, the oil needs to be replaced. 2. Noise: If the noise varies with the engine speed, it may be related to the crankshaft, connecting rod, or piston pin. If the noise varies with the camshaft speed (half the engine speed), it may be related to the valve train components. A handheld digital tachometer can help determine whether the noise is associated with components operating at crankshaft or camshaft speed.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.