What does Audi e-tron mean?

What does China V and China VI vehicles mean?

China V and China VI refer to the national standards for vehicle exhaust emission testing. There are certain differences between the China V and China VI emission standards. The China VI testing standard increases the difficulty of exhaust emission testing compared to the China V standard and introduces new regulations for the emission standards of newly manufactured vehicles. Below is an introduction to the new China VI standard: 1. Added OBD (On-Board Diagnostics) inspection. If the vehicle displays a fault light or detects a fault code in the engine system, it will be considered unqualified, resulting in failure to pass the annual inspection. 2. Added inspection for readiness status of the engine system, such as whether the oxygen sensor is in the ready state or whether the three-way catalytic converter is in the ready state. If none of these are in the ready state, the vehicle will fail the annual inspection. 3. The China V regulation uses the NEDC (New European Driving Cycle) for both emission and fuel consumption tests. The China VI regulation still uses the NEDC for fuel consumption testing but adopts the stricter WLTC (Worldwide Harmonized Light Vehicles Test Cycle) as the emission test cycle.

18

5

Share

What is the fuel tank capacity of the Wrangler in liters?

The 2022 Wrangler comes in a total of 7 models, with two different fuel tank capacities. The four-door version has a fuel tank capacity of 81.4 liters, while the two-door version has a capacity of 70 liters. In the same vehicle class, the 2020 Ford Everest offers 11 models, all with a fuel tank capacity of 80 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. To check the remaining fuel level, observe the fuel gauge on the right side of the instrument panel, marked with E and F. When the needle is near E, it indicates low fuel, and when it is close to F, it means the fuel level is sufficient.

16

0

Share

Which cities have implemented electronic driver's licenses?

A total of 28 cities have implemented electronic driver's licenses for motor vehicles, including Beijing, Tianjin, Shijiazhuang, Changchun, Daqing, Shanghai, Wuxi, Yancheng, Taizhou, Ningbo, Jiaxing, Nanchang, Jinan, Qingdao, Changsha, Guangzhou, Shenzhen, Nanning, Chongqing, Mianyang, Zigong, Nanchong, Guiyang, Xi'an, Yinchuan, Kunming, Tianjin, and Suzhou. Relevant information is as follows: Introduction: The electronic version of the motor vehicle driver's license needs to be obtained through the mobile app "Traffic Management 12123". The Traffic Management 12123 app can be directly downloaded on both Android and Apple phones. After downloading, users can register to bind their motor vehicle license and driver's license. Function: The Traffic Management 12123 app is very convenient to use. It allows users to handle various driver's license-related and motor vehicle-related business, greatly saving time and improving efficiency. Most services can be processed through the app without the need to visit the vehicle management office.

10

2

Share

What does TCS mean?

TSC stands for Traction Control System. Its full English name is Traction Control System. Like ABS and ESP, it belongs to the active safety system of automobiles. The traction control system can prevent the drive wheels from spinning when the vehicle is driving on slippery roads such as snow, enabling the vehicle to start and accelerate smoothly. Especially on snowy or muddy roads, the traction control system can ensure smooth acceleration performance and prevent the vehicle from skidding sideways or fishtailing due to the drive wheels slipping. The control device of the traction control system is a computer. It uses the computer to detect the speed of the four wheels and the steering angle of the steering wheel. When the car accelerates, if the computer detects that the speed difference between the drive wheels and the non-drive wheels is too large, it immediately judges that the driving force is too large and sends a signal to reduce the fuel supply of the engine, thereby reducing the driving force and the slip rate of the drive wheels.

17

1

Share

What does the TC indicator light on the car dashboard mean?

The flashing TC indicator light on the car dashboard indicates that the traction control system is in operation. TC is the abbreviation for Traction Control System, which means the anti-skid control system. When braking or accelerating sharply on slippery roads, the wheels are prone to skidding, even losing directional control, which can be dangerous. To address such safety issues, the traction control system was developed. The traction control system relies on the electronic sensors of the ABS anti-lock braking system. When it detects that the speed of the driven wheels is lower than that of the driving wheels, indicating wheel skidding, it sends a feedback signal to the car's system. The car system then adjusts the ignition timing, reduces the throttle opening, decreases the throttle, downshifts, or brakes the wheels accordingly to prevent skidding. The traction control system can improve acceleration and climbing ability. The ECU adjusts based on the current speed to enhance stability and acceleration performance. When climbing, excessive braking force can make it difficult for the vehicle to move. With this system installed, the ECU increases traction based on the current conditions, ensuring smooth driving.

2

0

Share

Is It Necessary to Maintain the Car Brake System?

It is necessary to maintain the car brake system. As one of the most critical systems in a vehicle, the brake operates under extremely harsh conditions. Any malfunction in this system can lead to traffic hazards at any time, so regular inspection and maintenance of the brake system are essential. Maintenance intervals for the car brake system: Front disc brakes: approximately 30,000 kilometers; Rear disc brakes: approximately 60,000 kilometers; Drum brakes: approximately 100,000 kilometers. Items required for car brake maintenance: High-temperature protection for brake pads; Lubrication maintenance for brake calipers; Brake disc cleaning; Brake fluid replacement; Anti-rust lubrication for tire bolts, brake discs, and wheel contact surfaces. Braking, also known as deceleration, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, other transport tools, or machinery. The components of a brake system include: brake pedal, booster, master cylinder, ABS assistance, oil pipes, wheel brake calipers, and friction components. The purpose of braking is to slow down and stop the vehicle, and its principle involves the energy conversion process of transforming the vehicle's kinetic energy into thermal energy through friction.

13

5

Share

What does Audi e-tron mean?

What does China V and China VI vehicles mean?

What is the fuel tank capacity of the Wrangler in liters?

Which cities have implemented electronic driver's licenses?

What does TCS mean?

What does the TC indicator light on the car dashboard mean?

Is It Necessary to Maintain the Car Brake System?

What is the friction coefficient of automotive brake pads?

How often should water be added to a car's radiator?

Which is More Durable: CVT or AT Transmission?

What are the differences between Oushang x7 and Oushang x7plus?