What does Audi C7 mean?

1 Answers
JamesFitz
07/30/25 1:09am
Audi C7 refers to the Audi A6L produced between 2012 and 2018. The 'C' stands for C-segment vehicles, which are generally large and medium-sized cars or premium sedans, with engine displacements ranging from 2.4 to 3.2 liters. The number following the letter indicates the specific model, with '7' representing the seventh generation. C-segment vehicles, also known as mid-size or executive cars, typically have a wheelbase of around 3.0 to 3.1 meters and engine displacements between 2.4 and 3.2 liters. The classification of cars is not based on a single parameter but is derived from a comprehensive analysis of multiple factors such as body size, price, power, and engine displacement. The letters denote the car's class, with 'C' representing C-class cars and 'B' representing B-class cars. This classification method was invented by Volkswagen and is not a globally unified standard, but China has consistently followed this standard. This rating system was established by Volkswagen when they first formulated their platform strategy, serving as a set of reference values. Vehicle classes are mostly categorized as: A00, A0, A, B, C, D.
Was this review help?
8
4
Share
More Forum Discussions

What is the method for smoothly stopping by applying the brakes?

Place your foot on the brake pedal, apply pressure evenly, and decelerate smoothly until your speed matches the vehicle in front, maintaining the brake pedal position. Then observe the speed changes of the vehicle ahead and adjust the braking force accordingly. Slowly release the brake pedal, accelerate forward, and continue to maintain the same speed as the vehicle in front for smooth following.
14
2
Share

What to Do When a Haima Car Suddenly Fails to Start?

First, you can wait for the tachometer and speedometer to return to their positions after turning the key before starting. Even if the owner does not drive after each ignition, the car should be allowed to run for two or three minutes before turning it off.
8
4
Share

What is the correct way to measure engine oil?

Before measuring the engine oil, pull out the dipstick, wipe it clean, reinsert it, and then pull it out again to check the oil level. If the oil level is between the two marks on the dipstick, it indicates the oil quantity is normal. Generally, you should wait for about 15 minutes after turning off the engine to allow the oil to stabilize before checking. Ensure the vehicle is parked on a level surface when checking the oil to guarantee an accurate measurement. The first time you pull out the dipstick, wipe it clean before reinserting it, then pull it out again to check the oil level. This ensures an accurate and intuitive reading of the oil quantity. Park on level ground. To ensure the accuracy of the dipstick measurement, the car must be parked on a flat surface. This is easy to understand—if the surface is uneven, especially on steep ground, any measurement will be inaccurate. Cold engine condition: Measure the engine oil using the dipstick when the engine is cold. This is a detail many car owners overlook. Some might ask: Is this really necessary? Based on years of experience, it absolutely is. Engine oil lubricates the engine's moving parts and flows inside the engine to reduce friction. When the engine is hot, some oil remains adhered to the components. Measuring the oil level under these conditions will result in inaccuracies, typically a few millimeters off.
8
4
Share

What to Do About Steering Wheel Noise in the Enclave?

Steering column lacks lubrication, resulting in high friction. Check if the power steering fluid is insufficient. Inspect the universal joint for any issues. Examine whether the rubber bushings of the suspension stabilizer bar links on the chassis have aged and hardened. Damaged plain bearing.
1
2
Share

How to Fold Down the Rear Seats of the Honda Haoying?

Enter the car and remove the shoulder strap of the rear seatbelt. Then pull the rear seat release switch in the trunk. Next, fold down the seats. To adjust the headrest of the Honda Haoying seats, use both hands to grasp the sides of the headrest and pull upward to raise the headrest position. To lower the headrest, press the button and move the headrest downward.
20
0
Share

What are the differences between the Mazda6 Atenza 2.0 and 2.5?

Here are the differences between the Mazda6 Atenza 2.0 and 2.5: 1. Fuel consumption difference. The factors affecting a car's fuel consumption are nothing more than the following: the vehicle's weight, displacement, transmission, and driving style. A mere 0.5-liter displacement difference has minimal impact on fuel consumption. The factors that truly significantly affect fuel consumption are the vehicle's weight and driving style, while larger displacement often has little effect. 2. Different engines have their own optimal efficiency RPM ranges. However, larger displacement engines are more powerful, making it harder to reach the ideal RPM during normal driving. The 2.5L engine's optimal efficiency RPM range is between 2500-3000 RPM, but maintaining this RPM may be more fuel-efficient but could also mean exceeding the speed limit. A smaller displacement engine maintaining this RPM might be just right, which is why the 2.0 is more fuel-efficient. 3. Configuration: In terms of engine power, the 2.5L naturally aspirated engine has a maximum power of 192 horsepower (141 kW) at 6100 RPM and a maximum torque of 252 Nm at 3250 RPM. The 2.0L naturally aspirated engine has a maximum power of 158 horsepower (116 kW) at 6400 RPM and a maximum torque of 202 Nm at 4000 RPM.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.