···
Log in / Register

What does 'aoff' mean in the Buick Excelle?

4 Answers
Janet
07/29/25 2:52pm
In the Buick Excelle, 'aoff' refers to the start-stop function disable switch. When the light is on, the start-stop function is disabled. Pressing the OFF button allows manual deactivation of the automatic start-stop system. Below is an introduction to the Excelle: 1. Exterior: Features LED daytime running lights and a waterfall-style front grille design. 2. Handling: Equipped with an electronically assisted steering wheel that operates quite lightly. The independent suspension design is average, but the chassis is relatively solid, performing well during sharp turns without significant body roll. 3. Noise insulation: When driving at high speeds, tire and wind noise are relatively noticeable.
Was this review help?
2
1
Share
BrandonMarie
08/13/25 7:24am
When driving the Excelle, I was also curious about what the A OFF was. It's actually the indicator for the auto start-stop function being turned off. The Buick Excelle comes standard with an auto start-stop system designed to save fuel and be eco-friendly, such as shutting off the engine at red lights. But when you press the button on the center console and see A OFF displayed, it means the system is deactivated and won't automatically shut off the engine. Why turn it off? Sometimes the repeated starts and stops in heavy traffic can be annoying, or in winter when the engine hasn't fully warmed up, shutting it off puts more strain on the battery. Keeping it on can save about 10% on fuel, but frequent starts and stops might accelerate battery aging. I suggest beginners try driving with it on for a while to get used to it, and if it's bothersome, just press the button to turn it off. Remember to check the battery condition during maintenance to ensure the system works properly. Fellow drivers say this feature is quite smart but not perfect, making it suitable for city commuting.
Was this review help?
1
4
Share
Expand All
DiJason
10/11/25 5:05am
As an Excelle owner, the A OFF light indicates that you've manually turned off the auto start-stop system. When driving on the road and encountering the A OFF button, I often press it to deal with busy traffic conditions. For example, in stop-and-go city driving, frequent engine restarts can cause uncomfortable vibrations, and turning it off makes the car run more smoothly. On some cold days, turning it off also helps protect the battery life. This design in the Buick Excelle is quite user-friendly, with a simple operation—just a button near the instrument panel. In daily use, I've found that turning off A OFF right after starting the engine makes driving more worry-free. Compared to some older cars without this feature, the Excelle is indeed more eco-friendly. However, remember not to keep it turned off all the time, or you'll waste fuel. On weekend drives, I occasionally turn it on to test the effect, and it's fun to feel the difference.
Was this review help?
8
4
Share
Expand All
Noelle
11/24/25 6:12am
When driving the Excelle, encountering A OFF indicates that the auto start-stop function has been disabled. From a safety perspective, while this feature is beneficial, it's not advisable to keep it always on. For instance, during rainy or snowy conditions when the road is slippery, repeated start-stop cycles can increase the risk of vehicle rollback, and turning it off can enhance control. Similarly, turning it off in tunnels can prevent sudden engine shutdowns that might impair visibility. The Buick Excelle's setup aims to save fuel, but I've found that disabling A OFF allows for more even engine warm-up, reducing the likelihood of malfunctions. New owners should familiarize themselves with the button's location to ensure it can be promptly deactivated when necessary.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

What is the horsepower of the Wrangler's engine?

The maximum power output of the engine in the Wrangler is 226 horsepower. Here are some additional details about the Wrangler: 1. The Wrangler is a mid-size SUV produced by Jeep. 2. Powertrain: This vehicle is available with one powertrain option, featuring a 2.0T turbocharged engine. This engine delivers a maximum power of 195.4 kW and a maximum torque of 400 Nm. 3. The vehicle features a body-on-frame design: The overall design of the car is quite boxy, with the iconic seven-slot grille on the front fascia retained. It also incorporates chrome accents for decoration, and the front fascia details have been upgraded, blending classic elements with modern technology.
17
1
Share

How to Replace the Air Filter?

How to replace the air filter: 1. Locate the air filter position. If unsure, refer to the vehicle's user manual. 2. Before opening the air filter plastic cover, determine whether it is secured by screws or clips. 3. Remove the plastic cover of the air filter, take out the filter, and note the orientation of the air filter's top side. Then, clean the inside and outside of the air filter housing with a clean cloth. 4. Install the new air filter in its original position, ensuring the correct orientation of its front and back sides.
6
5
Share

What does the AC button in a car represent?

Car's AC button represents the air conditioning switch. Here are some introductions about the AC button: 1. The AC button in a car is the air conditioning switch. When this button is pressed, the car will automatically turn on the cooling system, and you will feel cold air blowing out. When we press this button, the car's cooling system starts operating. 2. There is an indicator light below the AC button in a car. When the light is on, it indicates that the switch has been activated. The car's AC button is equivalent to a button on a home air conditioner remote control, with the purpose of expelling the heat inside the car to the outside through air conditioning or ventilation.
13
0
Share

What Are the Precautions for Turning a Car?

Here are four key precautions for turning a car: 1. Use turn signals: Always activate your turn signals when turning; otherwise, drivers behind you may misjudge your actions, leading to unnecessary accidents or injuries. 2. Avoid sudden steering: Reduce speed when turning and steer smoothly to prevent skidding caused by excessive centrifugal force. 3. Do not coast into turns: In neutral gear, the engine cannot regulate wheel speed, causing the car to move solely by inertia. This significantly reduces the effectiveness of braking and steering, increasing safety risks. 4. Take wide left turns: To avoid obstruction or collision, turn as far as possible toward the intended direction.
13
5
Share

How to Use the Auto Start-Stop Function in Cars?

Here's how to use the auto start-stop function in cars: Once the car is started, the auto start-stop system is in normal working condition. When parking, shift to neutral, pull the handbrake, and release the clutch. After the system detects these three actions, it will automatically turn off the engine. When the clutch is pressed again, the engine will automatically restart. Below is some information about the auto start-stop function: 1. Engine auto start-stop: A system that automatically shuts off the engine when the vehicle comes to a temporary stop during driving and automatically restarts the engine when it's time to move forward again. 2. Auto start-stop English name: STOP&START, abbreviated as STT. The STT intelligent fuel-saving system is a system that controls the starting and stopping of the engine.
14
2
Share

What materials are brake pads made of?

Brake pads are made from a variety of materials, and the manufacturing materials are not fixed. However, there are mainly four types of materials: 1. Resin-based brake materials; 2. Powder metallurgy brake materials; 3. Carbon/carbon composite brake materials; 4. Ceramic-based brake materials. Below is a partial introduction to brake pads: 1. Automotive brake pads are generally composed of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 furnace temperature tracker to ensure the temperature distribution during coating, thereby guaranteeing quality. 2. Daily driving: Use the accelerator to control speed as much as possible to minimize the use of brakes, which can extend the lifespan of the brake pads.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.