What does an oil can dripping oil indicate?

1 Answers
LeEvelyn
07/29/25 7:24am
An oil can dripping oil symbol represents the engine oil pressure warning light. When this symbol appears, it indicates abnormal oil pressure or insufficient oil level in the engine. Below is relevant information about engine oil: 1. Function: Engine oil is referred to as the blood of the engine. It serves to lubricate, clean, cool, seal, cushion, and prevent rust within the engine. 2. Classification: Synthetic oil is artificially formulated through chemical processes, while mineral oil is extracted from minerals. Synthetic oil performs better than mineral oil but is also more expensive. Among synthetic oils, full synthetic oil outperforms semi-synthetic oil with better cleanliness and smoothness, as well as a longer replacement interval.
Was this review help?
19
0
Share
More Forum Discussions

What is the difference between Benz and Mercedes-Benz?

The differences between Benz and Mercedes-Benz are: 1. Different body structures: Benz is a 4-door 5-seater sedan; Mercedes-Benz is a 5-door 5-seater hatchback. 2. Different body lengths: The body length of Benz is 4622 mm; the body length of Mercedes-Benz is 4419 mm. 3. Different vehicle heights: The height of Benz is 1454 mm; the height of Mercedes-Benz is 1432 mm. Both Benz and Mercedes-Benz are equipped with a 1.3T turbocharged engine, with a maximum horsepower of 136 hp, a maximum power of 100 kW, and a maximum power speed of 5500 rpm.
11
0
Share

What does 'max' on the coolant reservoir mean?

'Max' on the coolant reservoir refers to the maximum allowable level for adding coolant, while 'min' indicates the minimum level. The method for adding coolant is as follows: 1. Unscrew the radiator cap to drain the coolant; 2. Run the engine at idle and inject clean water until the water coming out of the radiator is clear; 3. Wait for the clean water to drain completely and close the water valve; 4. Add new coolant until the liquid level is between the 'max' and 'min' marks; 5. Close the cap and let the engine idle for two to three minutes. Precautions for using coolant include: 1. Try to use the same brand of coolant; 2. Ensure the product is within its validity period when adding; 3. Avoid diluting with water; 4. If a large amount of particulate sediment appears, it indicates the coolant has deteriorated and should no longer be used.
12
4
Share

What Are the Functions of a Car Air Conditioner?

The functions of a car air conditioner include: 1. Heating and cooling the air to maintain a comfortable temperature inside the cabin; 2. Removing moisture from the air, drying it to absorb human sweat and create a more comfortable environment; 3. Drawing in fresh air for ventilation; 4. Filtering the air to remove dust and pollen. Precautions when using a car air conditioner are: 1. Choose an appropriate temperature setting; 2. Avoid immediately switching to recirculation mode upon entering the car in summer; 3. Do not leave the air conditioner running for extended periods; 4. Avoid frequently adjusting the air vent direction; 5. Use the air conditioner in a fully enclosed state; 6. Do not rest or sleep for long periods in a stationary car with the air conditioner running.
7
1
Share

What to Do When Experiencing Jerking Sensation While Driving?

The solutions for experiencing a jerking sensation while driving are: 1. Check the temperature of the transmission; 2. Reprogram the transmission computer system; 3. Replace the transmission fluid; 4. Inspect the internal valve body of the transmission for damage; 5. Clean the inside of the transmission. The reasons for experiencing a jerking sensation while driving are: 1. The upshift speed cannot keep up with the speed at which the driver presses the accelerator; 2. When the driver releases the accelerator pedal or presses the brake pedal, the engine speed and clutch plate speed become unsynchronized; 3. Transmission gear program malfunction; 4. Internal contamination or presence of impurities in the transmission; 5. Poor transmission cooling.
4
2
Share

Can You Still Drive with a Bad Spark Plug?

You can still drive for a short time with a bad spark plug, but prolonged use without replacement can lead to aggravated engine damage or even total failure. Symptoms of a faulty spark plug include: 1. A layer of dark compounds covering the insulator skirt, electrodes, and shell; 2. The engine feels sluggish while driving; 3. Loud popping sounds or black smoke from the exhaust; 4. Rough idling and difficulty starting the vehicle; 5. Blackened exhaust pipes with unburned fuel discharge; 6. Regular engine shaking. Causes of a bad spark plug are: 1. Weak spark energy during ignition; 2. Excessively lean air-fuel mixture; 3. Overheating engine operation; 4. Clogged air filter; 5. High idle speed; 6. Severe carbon buildup and use of low-quality gasoline; 7. Damaged valve oil seals or crankcase ventilation valve.
15
0
Share

What is the tire model of Chery Tiggo 3?

Chery Tiggo 3's tire model is 215/60R17, where 215 represents the tread width of 215mm, 60 indicates the aspect ratio of the tire, R stands for radial construction, and 17 denotes the inner diameter of the tire as 17 inches. Taking the 2020 Chery Tiggo 3 as an example, its body dimensions are: length 4420mm, width 1760mm, height 1670mm, with a wheelbase of 2510mm and a fuel tank capacity of 55 liters. The 2020 Tiggo 3 is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 116hp and a maximum torque of 143Nm, paired with a 5-speed manual transmission.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.