What Does an Intelligent Vehicle Terminal Mean?

Was the last Reiz model produced in 2017?

The last Reiz model was discontinued in September 2017. Here is some information about the Reiz: 1. The Reiz (REIZ) is the domestic name for the Japanese Toyota MARK-X model. It began production in October 2005 at the Tianjin FAW Toyota Plant No. 2, sharing the production line and chassis with the Crown, and equipped with the same six-speed automatic transmission as the Crown. Production ceased in September 2017, with a total of 528,188 units produced. 2. The facelifted Reiz by FAW Toyota features significant exterior changes compared to the current model. The new model measures 4750mm in length, 1795mm in width, and 1450mm in height, with a wheelbase of 2850mm. This is slightly longer than the current model's dimensions of 4735mm/1795mm/1450mm, while the wheelbase remains unchanged. 3. Compared to the current model, the facelifted Reiz features a completely redesigned front headlights, front grille, and front bumper, with LED elements integrated into the headlight assembly. The rear changes focus on the new taillight design, with fang-like outlines that enhance the visual impact. 4. In terms of powertrain, the facelifted Reiz continues to use the current 2.5L and 3.0L engines, while the 3.5L engine available in overseas models will not be introduced. The transmission remains a six-speed automatic gearbox.

19

3

Share

What are the functions of the rearview mirror buttons in Volkswagen cars?

The switch button on the interior rearview mirror of Volkswagen cars controls the anti-glare function of the rearview mirror. The anti-glare rearview mirror consists of a special mirror, two photodiodes, and an electronic controller. The electronic controller receives signals of front and rear light from the photodiodes and is installed below the front windshield of the vehicle. If light shines on the interior rearview mirror, and the light from the rear is stronger than that from the front, the electronic controller will output a voltage to the conductive layer. This voltage changes the color of the electrochromic layer on the mirror. The higher the voltage, the darker the color of the electrochromic layer. At this point, even if strong light shines on the rearview mirror, the light reflected to the driver's eyes by the anti-glare rearview mirror will appear dim, preventing glare. The electrochromic layer continuously adjusts based on the intensity of the incoming light from the rear to prevent glare. When the vehicle is in reverse, the anti-glare function of the interior rearview mirror is deactivated, and the right exterior rearview mirror automatically tilts downward to illuminate the ground. Although the automatic anti-glare rearview mirror can prevent glare, when reversing out of a garage, the light at the rear of the vehicle may be stronger than that at the front. In this case, if the rearview mirror darkens, it may hinder the driver's ability to see clearly while reversing. Therefore, some cars are designed to automatically deactivate the anti-glare function when the car is shifted into reverse gear, or the function can be manually canceled using the switch.

1

Share

How Long is the Warranty for Car Tires?

Car tires generally have a warranty period of 3-5 years, as the primary material of car tires is rubber, whose properties deteriorate over time due to aging, leading to a decline in tire performance. When purchasing tires, it is advisable to choose tires with a manufacturing date as recent as possible, preferably within one year. The following are tire maintenance methods: 1. Regularly clean stones from the tire treads. 2. Minimize exposure to direct sunlight. 3. Monitor tire pressure promptly. 4. Pay attention to suspension maintenance. 5. Regularly check front wheel alignment. 6. Choose smooth road surfaces while driving, avoiding objects that can puncture or scratch the tires, and steer clear of chemical spills that may corrode the tires.

7

1

Share

The Real Fuel Consumption of Haval M6?

Haval M6's actual fuel consumption test results show an average of 9.5L/100km, while the Ministry of Industry and Information Technology announced the comprehensive fuel consumption of Haval M6 as 7.4L/100km. Haval M6 is equipped with a 1.5T-150 horsepower L4 engine, paired with a 6-speed manual transmission version. The average fuel consumption is 9.08L/100km, tested by 404 car owners. With the same engine but paired with a 6-speed automatic manual transmission version, the average fuel consumption is 10.17L/100km, tested by 285 car owners. Another version with the same engine but paired with a 7-speed dual-clutch transmission has an average fuel consumption of 9.92L/100km. Actual fuel consumption depends on driving conditions and road conditions, with the lowest being 7L/100km and the highest exceeding 12L/100km. In heavy traffic, fuel consumption will definitely be higher. Under normal conditions without traffic, the fuel consumption is around 9.2L/100km. When driving on the highway with cruise control, the fuel consumption is around 8L/100km. The power performance is also completely satisfactory. Haval M6's overall fuel consumption performance is good, never exceeding 8L/100km during the test period, with the dual-clutch transmission also contributing to this. Compared to several other domestic SUVs, Haval M6's overall average fuel consumption is not considered high.

4

3

Share

How Often Should Engine Cleaning and Maintenance Be Performed?

Engine cleaning is generally recommended every 30,000 to 50,000 kilometers and does not require overly frequent maintenance. The reasons are as follows: 1. Most lubricants used in modern passenger cars come with built-in cleaning functions, ensuring that the engine does not accumulate sludge or only minimal amounts within a certain mileage. 2. Cleaning agents can be corrosive and may damage non-metal components inside the engine, leading to engine malfunctions. 3. If the vehicle has been driven for a long distance, cleaning the engine may result in reduced oil pressure, cylinder gasket leaks, and other issues, causing significant damage. 4. Over time, internal components wear out, and the accumulated sludge can help compensate for and repair some of this wear. If the air filter becomes clogged or accumulates too much dust, it can restrict engine airflow, allowing large amounts of dust to enter the cylinders. This accelerates carbon buildup, leading to poor ignition, reduced power, and increased fuel consumption. For normal city driving, the air filter should be inspected every 5,000 kilometers. If excessive dust is present, compressed air can be used to blow the dust out from the inside of the filter. However, the pressure should not be too high to avoid damaging the filter paper. It is important to note that water or oil should never be used to clean the air filter, as this can saturate and damage the filter element. For cleaning the combustion chamber, a specialized carbon remover can be used to soften and loosen carbon deposits on the chamber and fuel injectors, making them easier to remove. This method is highly effective, avoids surface damage to components compared to direct scrubbing, and significantly improves carbon removal efficiency.

16

2

Share

Why Do Brake Discs Develop Grooves?

The formation of grooves on brake discs is generally caused by driving habits, uneven distribution of braking force between front and rear wheels, or material issues and external forces. Below are detailed explanations regarding the causes of grooves on brake discs: Locations where grooves appear: Grooves only on the front or rear brake discs: Usually caused by driving habits or frequent uneven distribution of braking force between front and rear wheels; Grooves on only one brake disc while others remain normal: Typically caused by material issues or external forces. Possible factors: Foreign objects trapped between the brake disc and brake pad, coinciding with braking; Uneven force distribution from the brake caliper; Manufacturing defects in the brake pads, resulting in uneven composite materials that make the pads too hard or contain large metal particles.

14

5

Share

What Does an Intelligent Vehicle Terminal Mean?

Was the last Reiz model produced in 2017?

What are the functions of the rearview mirror buttons in Volkswagen cars?

How Long is the Warranty for Car Tires?

The Real Fuel Consumption of Haval M6?

How Often Should Engine Cleaning and Maintenance Be Performed?

Why Do Brake Discs Develop Grooves?

What Else Should Be Added Besides Fuel for a New Car?

Is the front brake of an electric vehicle on the left or right hand?

Can a regular car be upgraded with Burmester sound system?

What colors are available for the Focus?