What does an exclamation mark with a wavy line underneath mean on the dashboard?

1 Answers
WalkerRose
07/29/25 3:44pm
The dashboard displaying an exclamation mark with a wavy line underneath indicates an abnormal condition in the vehicle's tire pressure. The reasons for this abnormal tire pressure warning on the dashboard are: 1. Excessive tire pressure; 2. Tire leakage or puncture causing underinflation; 3. Tire pressure outside the normal range. The solutions for this abnormal tire pressure warning on the dashboard are: 1. Stay calm, reduce speed appropriately according to actual road conditions, avoid sharp steering and sudden braking, and stop in a safe place to check tire pressure; 2. If there is no tire damage, inflate the tire to the standard pressure value; 3. Press and hold the tire pressure monitoring reset button to automatically clear the previous data.
Was this review help?
11
2
Share
More Forum Discussions

What vehicles can be driven with an A2 driver's license?

A2 driver's license is authorized to drive tractor vehicles, which can tow heavy-duty and medium-duty full trailers and semi-trailers. Other vehicle types that can be driven with an A2 license include: B1 (medium-sized buses), B2 (large trucks), C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), and M (wheeled self-propelled machinery). According to the relevant provisions in the Ministry of Public Security Order No. 123 on the application and use of motor vehicle driver's licenses, among the full trailers and semi-trailers driven with a legally valid A2 driver's license in China, a full trailer is one where the total weight of the trailer is borne by itself, while a semi-trailer is one where part of the total weight of the trailer is borne by the tractor vehicle.
12
0
Share

What Are Some Tips for When the Key Won't Come Out?

Tips for when the key won't come out: 1. While gently turning the key with your right hand, wiggle the steering wheel left and right with your left hand, and the key should turn; 2. Check if there are any obstructions in the gear slot. If so, remove them, then start the car, shift the gear again to ensure it's fully back in position, and the key should come out. Reasons why the key won't come out: 1. The key can't be turned after insertion because the steering wheel wasn't returned to its proper position during the last parking, causing abnormal locking of the steering wheel; 2. The key can't be removed after turning off the engine because the automatic transmission isn't fully in the P (Park) position, failing to trigger the electronic sensor, or there are objects like coins in the gear slot blocking it from returning to position.
17
4
Share

What is the gear shifting mantra from first to fifth gear?

The gear shifting mantra from first to fifth gear is: For speeds between 10 to 20 km/h, you can use either 1st or 2nd gear; between 20 to 30 km/h, 2nd or 3rd gear can be used; between 30 to 40 km/h, 3rd or 4th gear; between 40 to 50 km/h, 4th or 5th gear; and for speeds above 50 km/h, use 5th gear. As speed increases, the gear should be shifted up accordingly. Failing to do so will keep the engine at high RPM, leading to a rapid increase in fuel consumption. 1st gear is for starting; 2nd gear is a transition gear, suitable for speeds up to about 30 km/h; 3rd to 4th gears are for city driving, suitable for speeds up to 60 km/h; and 5th gear is for fast driving, suitable for speeds above 70 km/h.
13
5
Share

What is the reason for the P light being on?

The reasons for the P light being on: 1. ABS function failure; 2. Severe brake pad wear leading to failure; 3. Brake oil not meeting requirements. Abnormalities in the braking system manifest as poor or failed braking, unilateral braking deviation, braking noise, brake drum overheating due to brake drag, parking brake failure, etc. The braking system mainly consists of four parts: the energy supply device, control device, transmission device, and brake. Its main functions are: 1. To decelerate or even stop a moving vehicle; 2. To maintain a stable speed for a vehicle going downhill; 3. To keep a parked vehicle stationary.
16
4
Share

How to Replace Brake Fluid in a Car?

The method for replacing brake fluid in a car is as follows: 1. Open the driver's side door of the car and pull the hood release lever located on the left side of the driver's leg area; 2. Lift the car's engine hood upwards and secure it with the support rod, ensuring it is firmly propped to avoid any hazards during the operation; 3. Refill the car's brake fluid up to the MAX level. Brake fluid, also known as hydraulic brake fluid, should be purchased from reliable manufacturers, and the higher the grade, the better. All liquids have the characteristic of being incompressible. In a sealed container or a liquid-filled pipeline, when the liquid is under pressure, it quickly and uniformly transmits the pressure to all parts of the liquid. Hydraulic braking systems operate based on this principle.
18
2
Share

What materials are needed to collect the annual inspection sticker for a new car after two years?

To collect the annual inspection sticker for a new car after two years, the following materials are required: 1. Motor Vehicle Inspection Mark Application Form (not required to bring, provided on-site, fill out directly); 2. Motor Vehicle License; 3. Compulsory Traffic Insurance Certificate; 4. Vehicle and Vessel Tax Payment or Tax Exemption Certificate; 5. Owner's ID card. If someone else is handling the process on behalf of the owner, the representative must bring their ID card. For company-owned vehicles, additional documents are needed, including the original vehicle license, duplicate of the compulsory traffic insurance, Organization Code Certificate of the People's Republic of China (with fresh seal), Power of Attorney (with fresh seal), and a copy of the representative's ID card.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.