What does an exclamation mark on the Mazda Atenza tachometer mean?

1 Answers
LaAniyah
07/30/25 5:00am
An exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard with exclamation marks, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system fault light, transmission fault indicator, and wiper fault indicator. Below is a detailed introduction to the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Main issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a transmission malfunction or transmission lubricant level below the normal range. The transmission oil should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle. This represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire Pressure Abnormality: A horizontal line with parentheses and an exclamation mark below. This represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, indicating a fault in the car lights. Solution: Go to a 4S shop for inspection as soon as possible, or check by yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights, to identify the problem. In addition, during daily use of the vehicle, the fault lights displayed on the dashboard are divided into two different colors, yellow and red: Yellow indicates a fault in the corresponding system, but the problem is not very serious. Reduce speed and proceed to the corresponding repair point for maintenance to eliminate potential safety hazards in time. Red indicates a very serious problem in the corresponding system. In this case, do not continue driving. Pull over immediately and call for professional help to prevent unpredictable dangers to the vehicle and personal safety caused by forced driving. It should be noted that when the car is started, all lights will turn on, and the system will perform an automatic check. After the check is completed, the lights will automatically turn off. If a light does not turn on when the ignition is switched on, remains on without turning off, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly for car inspection to eliminate potential safety hazards.
Was this review help?
4
3
Share
More Forum Discussions

Solution for Rust on Tiggo 3 Sunroof?

Use a flat-head screwdriver to scrape off the paint bubbles, sand with sandpaper, and carefully wipe away surface dust. After wiping with alcohol cotton, slowly apply touch-up paint with a touch-up pen, taking care to let it evenly penetrate into the gaps. Once the paint is dry, fill the gaps with 502 glue along the entire seam. Remember to proceed slowly to avoid drips that are hard to clean. After drying, apply another layer of 502 glue to completely seal the gaps at the joints. Regularly inspect the sunroof area and promptly wipe away any dust or water stains when opening the sunroof.
12
5
Share

How to Use the Auto Start-Stop Function in Cars?

The method to use the auto start-stop function in cars: Press the auto start-stop button to turn it off, which is symbolized by a capital letter A surrounded by arrows, and the dashboard will indicate the system is off; if you want to use this function again, simply press the button to turn it back on. Auto start-stop automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts the engine when it's time to move forward again. This system is implemented by enhancing the traditional engine with an idle start-stop capable motor, allowing the engine to completely shut off when idle stop conditions are met; when the car needs to start moving again, the idle start-stop motor system quickly responds to the driver's command to restart the engine promptly.
1
5
Share

How to Open the Hood of a Mercedes-Benz Smart?

First, open the driver's side door of the Mercedes-Benz Smart. Pull up the handbrake of the Mercedes-Benz Smart to prevent the car from rolling. Firmly pull the hood release lever located on the left side of the driver's leg area. At this point, a noticeable gap will appear at the front hood, indicating that it has been released. Remove the safety latch, and then you can lift up the engine hood of the Mercedes-Benz Smart. Use the support rod to prop up the hood of the Mercedes-Benz Smart, ensuring it is securely supported to avoid any hazards.
14
5
Share

The Most Effective Methods to Defog a Car?

Reduce the temperature difference between the inner and outer surfaces of the glass to eliminate fogging. The fog on the side and rear windows may not clear as quickly. Lower the air conditioning temperature and then activate the defogging function, which is a very convenient method. Open a small gap in the side windows to allow air convection, which helps remove moisture and reduces water condensation on the glass, effectively lowering the interior temperature. There are defogging agents available on the market, or you can make your own using dish soap, soapy water, saltwater, etc., as alternatives.
14
0
Share

How to Repair Car Overheating?

Need to stop driving, then open the engine hood to allow the engine to cool down. First, check if there is any issue with the catalytic converter and replace it if necessary. Check the thermostat. If it fails to open, it will obstruct the flow of coolant inside the engine. Replace the component if needed. Inspect the cooling fan in the engine cooling system. If it is not functioning properly, it will result in poor heat dissipation of the coolant. Replace it accordingly. Examine the water pump in the cooling system. If the pump does not rotate smoothly, it will lead to poor coolant circulation and excessively high coolant temperature. Replace it promptly.
11
3
Share

2021 Corolla Infotainment System Flashing Tutorial?

Download the firmware (remember to select the corresponding version), which is the update.zip file. Connect your phone to the infotainment screen using a data cable. On your computer, simply right-click the update.zip file and send it to "MX4". Locate the update.zip file, click on "update.zip", and your phone will automatically enter the upgrade interface. The update process will first verify the firmware, and upon successful verification, it will proceed. After a few minutes, you will return to the familiar interface. After entering the system, click on the "System Upgrade" icon on the desktop to view the current version number, indicating a successful upgrade.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.