What does an exclamation mark inside a Skoda bulb indicate?

2 Answers
MasonLynn
07/25/25 12:23am
Yellow bulb with an exclamation mark is the light fault indicator, indicating that there is a fault with the vehicle's lights. Solution: Visit a 4S store for inspection and repair as soon as possible, or you can perform a self-check. Focus on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue. The exclamation mark is a common fault indicator in vehicles. Besides the yellow bulb with an exclamation mark, there are four other forms of exclamation mark indicators: an exclamation mark inside a triangle, an exclamation mark inside a yellow gear, an exclamation mark inside a circled bracket, and an exclamation mark inside a bracket with a horizontal line below. Below is a detailed analysis: General Fault: An exclamation mark inside a triangle. If this symbol lights up, it indicates a fault in the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is necessary to visit a 4S store for inspection to identify the source of the fault. Automatic Transmission Fault: An exclamation mark inside a yellow gear. This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant level below the normal range. Transmission fluid should be replaced promptly. Brake System Fault: An exclamation mark inside a circled bracket. This represents a brake system warning, primarily indicating brake system failure or low brake fluid level. Immediate inspection and repair of the brake system are required to avoid accidents. Tire Pressure Anomaly: An exclamation mark inside a bracket with a horizontal line below. This represents the tire pressure monitoring warning light, which illuminates when the vehicle's tire pressure is too low. Check the tire pressure and restore it to the normal range.
Was this review help?
3
3
Share
LaEva
08/10/25 3:44pm
Hey, I've also had that bulb exclamation mark symbol on my Škoda before. It usually indicates a fault warning light for the headlights, brake lights, or taillights. Common causes include: the bulb itself burning out (broken filament cutting off current flow); loose plugs or connectors causing poor contact (dirty spark plugs can also affect this); wiring issues like short circuits, blown fuses, or moisture corrosion; and sometimes control module detection errors (false alerts when bulbs are actually fine). The car's sensors monitor the circuit and trigger the light when an open circuit is detected. My advice: don't panic—first physically check which light isn't working (try switching headlights on/off to observe). If the bulb appears blackened, replace it (Škodas mostly use halogen bulbs—opt for OEM parts to avoid compatibility issues). Pro tip: dust buildup on paintwork can obscure lights too—regular washing reduces false alerts. Address issues promptly, as dim lighting at night raises accident risks.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

Why is there an abnormal sound during cold start?

Cold start with abnormal noise is generally caused by the loss of lubrication in the internal gears of the starter, resulting in stiffness and jamming, which affects the timely return of the gears. That is, when starting the engine, the starter rotates to drive the flywheel to rotate, thereby starting the engine. At this time, the engine speed is driven by the starter, so the engine speed is lower than the starter speed. When the engine speed after starting is higher than the starter speed, the ignition switch is manually turned off, and the starter is closed. Information about cold start is as follows: 1. A cold start is when the engine is started with low water temperature, usually after the car has not been started for a long time (such as after parking overnight). 2. Engine cold start refers to the situation where the engine is started after a period of time since the last shutdown, and its internal temperature is consistent with the ambient temperature.
13
5
Share

How Many Liters of Coolant Are Needed for a Volkswagen EA211 Engine Replacement?

Volkswagen EA211 engine requires 4-5 liters of coolant for replacement, typically needing a change every 2 years or 40,000 kilometers. Coolant replacement procedure: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipelines, with particular attention to the five-way hose. The five-way hose is named for its five connections to various components, as the coolant flows through it to be distributed to different parts of the vehicle. If there is any coolant leakage in this section, replace the hose or resecure the connections as necessary. Drain the old coolant, then flush the liquid channels with clean water. Add water to the coolant reservoir, allowing it to continuously circulate through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to facilitate water circulation. Initially, the water draining from the reservoir may appear slightly pinkish. Continue adding clean water until the outflow runs clear. Note: Remember to disconnect the heater hose to drain the heater core completely. Approximately one hour after draining, add the new coolant through the radiator hose to ensure rapid flow into the radiator. Then, pour another container of coolant into the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As the cooling system expels some air, the fluid level will drop. Top up the coolant to the reservoir's maximum mark "MAXT".
17
2
Share

What is Timing?

Timing mainly refers to valve timing, which generally indicates the opening and closing times of the intake and exhaust valves as well as the maximum valve lift point. It is translated from the English term "timing." The opening and closing of valves are driven by the camshaft, and nowadays, the camshaft is driven by the crankshaft through a chain system or pulley. Therefore, the chain system that drives the camshaft is called the timing chain. Information about timing chains is as follows: 1. The timing chain drive method is reliable, durable, and also saves space. Its main function is to drive the engine's valve train, ensuring that the engine's intake and exhaust valves open or close at the appropriate times to allow normal air intake and exhaust in the engine cylinders. 2. As an indispensable component in the core parts of a car, the timing chain naturally has a certain degree of assembly difficulty. Some engines' timing chains have several obvious marks to ensure precision while reducing installation difficulty to some extent.
1
0
Share

What is the range of the Tesla Model 3 Standard Range version?

The domestically produced Model 3 Standard Range Plus version has an actual tested range of around 380km, which may be slightly less in winter and during high-speed driving. The Tesla Model 3 includes both imported and domestically produced versions. Among them, the imported Tesla Model 3 versions consist of the Standard Range Plus, Long Range Rear-Wheel Drive, Long Range All-Wheel Drive, and Performance High-Performance All-Wheel Drive, while the domestically produced Tesla Model 3 currently only has the Standard version. Different versions of the Tesla Model 3 have varying range capabilities. Below are the relevant details: 1. Tesla Model 3 (Imported) Standard Range Plus — MIIT pure electric range of 480km; Long Range All-Wheel Drive — MIIT pure electric range of 590km; Long Range Rear-Wheel Drive — MIIT pure electric range of 664km; Performance High-Performance All-Wheel Drive — MIIT pure electric range of 595km; 2. Tesla Model 3 (Domestically Produced) Standard Range Plus — MIIT pure electric range of 445km; The domestically produced Model 3 Standard Range Plus version has an actual tested range of around 380km, which may be slightly less in winter and during high-speed driving. Experiment: Under conditions of -10°C with heating function turned on, the Standard Range Plus version has a range of 320km in urban areas and 245km on highways.
11
0
Share

What car brand has a logo with three arrows?

The car brand with a logo featuring three arrows is Maserati. Here is more information about Maserati: 1. Logo: A trident placed on a leaf-shaped base, which is the city emblem of Bologna, Italy, where the company is headquartered. It is said to be inspired by the weapon of Neptune, the Roman god of the sea, symbolizing the immense power of the sea god. Maserati represents extraordinary refinement, timeless style, and intense emotion, and most importantly, the realization of dreams. 2. Origin: Maserati was once part of Ferrari and is now directly owned by Fiat Chrysler Automobiles. Today's new Maserati coupe series embodies the pinnacle of Italian coupe manufacturing technology and represents the perfect fusion of Italian design aesthetics and the craftsmanship of skilled designers.
15
3
Share

Can a car tire be replaced individually?

Car tires can be replaced individually, but it's important to ensure that the purchased tire specifications must first match those of the original tires equipped on the vehicle. Tires on the same axle should be of the same specification, structure, manufacturer, and tread pattern (with identical load index and speed rating). Specific considerations for replacing car tires are as follows: 1. During replacement, the tire specifications must comply with the vehicle manufacturer's requirements and recommendations, meaning the load index of the replacement tire must be equal to or greater than that of the original tire. 2. The speed rating of the replacement tire must be equal to or higher than that of the original tire. 3. When replacing only one tire, the new tire must have a tread groove depth similar to that of the other tire on the same axle; otherwise, it may cause issues such as vehicle deviation.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.