What does an exclamation mark in a car mean?

3 Answers
LaSophia
07/23/25 5:01pm
The following are the specific reasons for an exclamation mark appearing in a car: 1. Regular fault indicator light: (1) Overheating of the dry dual-clutch transmission clutch. (2) Intervention or failure of the fuel cutoff system. (3) Parking sensor failure. (4) External light failure. 2. Brake system warning light: (1) The light turns on for a few seconds after the ignition is turned on and turns off after the engine is started. (2) The light turns on when the handbrake is pulled up and turns off when it is released. (3) The light turns on when the brake fluid level is too low during driving. (4) The light turns on when there is a failure in the brake system.
Was this review help?
16
4
Share
MacMiles
08/10/25 12:43pm
That yellow exclamation mark light on the dashboard has come on several times during my years of driving – it's mainly a warning signal. The most common reason is uneven tire pressure; the light illuminates when the pressure is too low or varies significantly, reminding you to inflate or check the tires. It could also indicate a brake system issue, like the parking brake not being fully released or insufficient brake fluid. In such cases, when the light appears, I immediately pull over to avoid danger at high speeds. I remember last winter during a long trip, the tire temperature dropped too quickly, and the light came on—I had to pull over and inflate the tires to resolve it. It's important to regularly check tire conditions and fluid levels. If the light comes on, don’t panic—first, pull over to assess the situation. If unsure, head to a repair shop. Safety always comes first; never gamble with your life.
Was this review help?
9
3
Share
Expand All
HectorDella
09/22/25 7:02am
A few days ago, I drove to the supermarket to buy groceries when suddenly a yellow exclamation mark appeared on the dashboard, which gave me a scare. My husband taught me to first check if the handbrake was fully released—turns out I had indeed forgotten to release it completely! After releasing it properly, the light went off. It could also be caused by low tire pressure. There's a free air pump at the gas station; just bring a tire pressure gauge to measure and top up the air as needed. Now, I check the tire pressure every two weeks to maintain the recommended level and also take the opportunity to check the tightness of the brake pedal. Taking care of these small things makes driving more reassuring and reduces such scary moments. When a light comes on, don’t overthink it—simple solutions are usually effective.
Was this review help?
16
5
Share
Expand All
More Forum Discussions

How to Cancel the Auto Start-Stop Function on Malibu XL?

To cancel the auto start-stop function on Malibu XL, follow these steps: 1. Start the car and long-press the auto start-stop switch; 2. Click the set button on the left multifunction steering wheel until you hear a beep; 3. Press the OK button on the right multifunction steering wheel. The auto start-stop function refers to a system that automatically turns off the engine when the vehicle comes to a temporary stop during driving and restarts it when you continue moving. Precautions for using the auto start-stop function include: 1. Quickly shift to P gear and release the brake when the engine stops; 2. Reduce current consumption; 3. Avoid repeatedly pressing the brake when the engine is off; 4. Wait for the engine speed to drop to zero before engaging the starter gear for restart; 5. Do not activate the auto start-stop system during low-speed parking or when using the air conditioning.
11
3
Share

How many seconds does the Haval H9 take to accelerate from 0 to 100 km/h?

Haval H9's 0-100km/h acceleration time is 9.53 seconds. Below are relevant details about the 0-100km/h acceleration: Transmission self-protection: During initial acceleration, the Haval H7's dual-clutch transmission engages in self-protection, releasing full power after approximately half a second. This results in slight front-wheel slippage, with a final 0-100km/h acceleration time of exactly 9 seconds. Smooth start: The engine speed is limited to 2200rpm during initial acceleration, resulting in a relatively gentle start. The tires experience only minimal slippage before regaining traction. The tachometer's redline is at 5500rpm, and the transmission upshifts at 5000rpm.
16
1
Share

Where is the VIN located on the Geely King Kong?

Geely King Kong's VIN is located on the nameplate of the radiator frame in the engine compartment. The VIN refers to: 1. The first three characters represent the vehicle's production country, manufacturer, and vehicle type; 2. Characters 4 to 8 indicate vehicle characteristics, such as vehicle category, body type, engine type, and gross vehicle weight rating; 3. The 9th character is a check digit used to verify the accuracy of the VIN; 4. The 10th character indicates the production year; 5. The 11th character represents the vehicle's assembly location; 6. Characters 12 to 17 of the VIN are the production sequence number.
10
5
Share

How Should Tires Be Rotated?

Tire rotation methods vary depending on the vehicle type: 1. Rear-wheel drive vehicles: When rotating tires, the left front tire should be moved to the right rear, the right front tire to the left rear, the left rear tire to the left front, and the right rear tire to the right front; 2. Front-wheel drive vehicles: When rotating tires, the left rear tire should be moved to the right front, the right rear tire to the left front, the left front tire to the left rear, and the right front tire to the right rear; 3. Four-wheel drive vehicles: All left and right tires should be crossed and swapped. If the same specification tires are used, the left and right tires can be directly swapped. Important notes for tire rotation include performing a four-wheel alignment after rotation and regularly maintaining the tires.
2
5
Share

How to Turn on Car Fog Lights?

To turn on car fog lights, follow these steps: 1. When the front fog light switch is in the 'on' mode and the position lights or low beams are illuminated, rotate the fog light switch knob to the front fog light position to activate the front fog lights. 2. When the rear fog light switch is in the 'on' mode and the low beams are illuminated, rotate the fog light switch knob to the rear fog light position to activate the rear fog lights. The knob will automatically return to its original position when released. 3. When the ignition switch is in the 'on' mode and the front fog lights are illuminated, rotate the fog light switch knob to both front and rear fog light positions to activate both fog lights. The knob will automatically return to the front fog light position when released. Functions of fog lights: 1. Front fog lights are used to improve illumination when road conditions ahead are unclear, serving to alert oncoming drivers. 2. Rear fog lights help vehicles behind to spot your car in low visibility conditions.
8
2
Share

How Many Cylinders Does the BMW 1 Series Have?

BMW 1 Series is equipped with a three-cylinder engine. It is a compact four-door, five-seater sedan launched by BMW. The dimensions of the BMW 1 Series are: length 4462mm, width 1803mm, height 1446mm, with a wheelbase of 2670mm, a fuel tank capacity of 50 liters, and a curb weight of 1385kg. The front suspension of the BMW 1 Series is a MacPherson strut independent suspension, and the rear suspension is a multi-link independent suspension. It is powered by a 1.5L turbocharged engine, delivering a maximum horsepower of 140PS, a maximum power of 103kW, and a maximum torque of 220Nm. It is paired with a 7-speed dual-clutch transmission.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.