What does an 'A' with a slash on the dashboard mean?

1 Answers
AlinaAnn
07/25/25 5:12pm
When the car dashboard displays an 'A' with a slash inside a circle, it indicates that the engine auto start-stop function cannot be activated at this time. Here are the specific details: 1. Auto Start-Stop Function. The auto start-stop function automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts it when it's time to move again. This system is implemented by equipping a traditional engine with an enhanced motor that has idle start-stop capability, allowing the engine to completely shut off when the conditions for idle stopping are met. 2. Dashboard Warning Lights. (1) Hazard Warning Light: Used to alert other vehicles and pedestrians when the car experiences a major malfunction or emergency. (2) Fuel Indicator Light: This light warns of low fuel levels. When illuminated, it means the fuel is nearly depleted. (3) Washer Fluid Indicator Light: Shows the level of windshield washer fluid. If the fluid is running low, this light will come on to remind the driver to refill it promptly.
Was this review help?
7
3
Share
More Forum Discussions

How to adjust the time on the dashboard of Dongfeng Fengguang 580?

The method to adjust the dashboard time is as follows: 1. When the speed displayed on the dashboard is 0, press and hold the 0.0/set button at the lower right of the dashboard, and the dashboard will display the mileage and time. 2. Then click the adjustment button, and it will automatically confirm after a few seconds. Here is some information about the Dongfeng Fengguang 580: 1. The Dongfeng Fengguang 580 is an SUV under Dongfeng, with a wheelbase of 2780mm and a body length of 4690mm. 2. The Dongfeng Fengguang 580 offers flexible and versatile space, with 5-seat and 7-seat configurations to meet diverse travel needs.
5
3
Share

What Causes Mismatch Between Speed and Gear in Automatic Transmission?

Transmission malfunction requires professional repair. Below are key points about automatic transmissions: 1. Operating Principle: Engine power is transmitted through the gearbox, a critical factor affecting fuel consumption. Generally, automatic transmissions consume 10%+ more fuel than manual ones. More gears mean better fuel efficiency for both types. 2. Driving Tips: For manual transmissions, upshift at higher RPMs. Engines are designed to operate optimally at higher revolutions - components' dynamic balance and rotational inertia parameters are calibrated accordingly. Prolonged low-RPM operation increases internal wear, causing vibration/detonation and reducing lifespan. Shifting at 3000RPM maintains post-shift RPM around 2300, keeping the engine within its healthy operating range.
19
1
Share

What Causes the Abnormal Noise During Low-Speed Braking?

Here are the reasons for abnormal braking noise during low-speed driving: 1. Severe wear of the brake pads, where the warning piece emits a sharp abnormal noise to prompt replacement. 2. Excessive wear of the brake disc or brake drum, which can also produce abnormal noise when too thin. 3. Recently replaced brake pads that do not fit properly with the contact surface of the brake disc or drum, resulting in point or line contact and causing abnormal noise. Here is some additional information: 1. The replacement cycle for brake pads is not fixed and depends on the vehicle's driving conditions, the frequency, and the force with which the driver presses the brake pedal. 2. The front brake pads wear out faster than the rear ones, with the front brake pads having a lifespan of approximately 30,000-50,000 kilometers, and the rear brake pads lasting about 100,000-150,000 kilometers.
17
1
Share

How much is the speed limit exceeded at 170 km/h on the highway?

Driving at 170 km/h on the highway exceeds the speed limit by less than 50% of the maximum speed. Below is relevant information about highway speeding: 1. Section speed measurement: In addition to electronic cameras, highways also use section speed measurement. This method involves setting up two adjacent monitoring points on the same road section to calculate the vehicle's speed based on the time it takes to pass between the two points, thereby determining if the vehicle has violated speed limits. Some areas also use radar microwave speed detection. 2. Dangers of highway speeding: Speeding on highways significantly reduces the driver's attention, as it is primarily focused on the road and vehicles ahead, neglecting the surroundings and the vehicle's own condition. Speed and field of vision are inversely proportional—the faster the speed, the narrower the field of vision, leading to heightened driver tension and a high likelihood of traffic accidents.
13
5
Share

What Do Highway Service Area Vehicle Inspections Typically Check?

Highway service area vehicle inspections typically check for all types of traffic violations, such as seat belt usage, drunk driving, speeding, and overloading. Below is relevant information about driving on highways: 1. Avoid excessive speed in ramps: Pay attention to turn signs, as ramps vary in curvature—some are slightly curved, while others can turn up to 360 degrees, which can be disorienting. Therefore, it's essential to reduce speed in ramps to prevent sudden turns. Ramps are the most accident-prone areas, so always observe speed limits. 2. Never stop at intersections: When approaching an intersection, slow down slightly in advance to allow time to confirm the correct direction. Some drivers speed through intersections, only realizing they've taken the wrong route afterward, then abruptly stop or even reverse—a highly dangerous practice that can result in fines and penalty points if caught by traffic cameras.
7
1
Share

How to set the time on Chery QQ3?

The method to set the time on Chery QQ3 is as follows: 1. Press and hold the SEL button for 2 seconds until SET flashes to enter the setting mode. Simultaneously press the SEL and TRIP buttons briefly to enter the clock initialization state, waiting for the clock to flash. 2. Then press the TRIP button to adjust the hour value. After setting the hour, press the SEL button to enter the minute adjustment mode. Press TRIP to adjust the minutes. After adjustment, briefly press both the "SEL" and "TRIP" buttons simultaneously to complete the setup. 3. Additional information: The Chery QQ3 features a fashionable appearance with vibrant colors, a dynamic shape, and stylish configurations, making it the first car in China specifically designed for trendy individuals.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.