What does AMT mean in cars?

What happens if you fill a car designed for 92 octane with 95 octane gasoline?

95 octane gasoline has a higher octane rating compared to 92 octane, providing better anti-knock properties, which results in fewer engine knocks, quieter operation, and potentially improved engine power and reduced fuel consumption. However, since engines designed for 92 octane typically have lower compression ratios, they may not fully utilize the characteristics of 95 octane gasoline. This could lead to insufficient compression and incomplete combustion of the gasoline, potentially causing sluggish acceleration during driving. Additionally, 95 octane gasoline is relatively more expensive. Below are some related points: 1. Meaning of gasoline grades: The grade of gasoline represents its octane rating. The higher the grade, the higher the octane rating, indicating better anti-knock properties. In reality, the gasoline grade has no relation to the cleanliness of the fuel. 2. Misconceptions about high-grade gasoline: Many people believe that higher-grade gasoline is better, providing stronger engine power and better cleaning effects. However, this is incorrect. Using gasoline with an excessively high grade not only offers no benefits to the engine but may also cause adverse effects and is simply a waste of money. For example, incomplete combustion may more easily lead to carbon deposits. 3. It's also not advisable to fill a car designed for 95 octane with 92 octane: Similarly, if the manufacturer specifies a minimum requirement of 95 octane but 92 octane is used instead, the lower fuel grade may cause knocking and detonation, resulting in reduced power output.

14

0

Share

Does idling with the air conditioning on affect the engine?

Running the air conditioning while the car is idling has a slight impact on the engine, as it can lead to carbon buildup, particularly around the exhaust pipe tailpipe, and increases fuel consumption. Although idling with the air conditioning on does not cause significant harm to the car, it is advisable to minimize such situations. Precautions for using the car air conditioning: 1. Do not turn on the air conditioning immediately after starting the car: First, open the doors and windows, activate the external circulation to release the accumulated hot air inside the car. Once the interior and exterior temperatures are similar, close the doors and windows, turn on the air conditioning, and switch to internal circulation. This not only lubricates the engine but also improves the cooling efficiency of the air conditioning. 2. Avoid using the air conditioning during prolonged traffic jams or waiting: If the air conditioning is left on during extended periods of idling, the engine remains in an idle state, which places a heavy burden on it. Additionally, incomplete combustion of gasoline at idle produces high concentrations of carbon monoxide. If the surrounding air circulation is poor (e.g., in a garage), the carbon monoxide from the exhaust can enter the car, posing a risk of poisoning to the occupants. 3. Do not set the temperature too low: The ideal temperature for the car air conditioning is around 25°C. If there are elderly or children in the car, it is best not to set it below 27°C. Also, consider the external temperature: the difference between the interior and exterior temperatures should generally not exceed 5–6°C. 4. Do not keep the internal circulation on continuously: When first turning on the air conditioning, it is best to use external circulation. After the temperature has dropped, switch to internal circulation, and periodically alternate between internal and external circulation. 5. Avoid direct airflow from the vents: When using the cold air setting, direct the airflow upward to promote convection between the hot and cold air inside the car. This helps cool the car more quickly and enhances comfort for the occupants.

7

3

Share

What is the appropriate tire pressure for a Corolla 1.2T?

The normal tire pressure range for a Corolla 1.2T is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. The Corolla 1.2T's tire pressure monitoring system is indirect, utilizing the vehicle's ABS balance control. It only displays low pressure when there is a leak. To check the tire pressure, first prepare a tire pressure gauge, locate the original tire pressure label, press the gauge onto the tire valve to measure and read the value, and remember to replace the valve cap after measurement. Generally, a tire pressure above 2.8 bar is considered too high, while a pressure below 2.0 bar is too low. Hazards of over-inflation: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of under-inflation: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement of tire parts, causing abnormal heat due to excessive rolling; weakens cord and rubber functions, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and ground, sharply raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside), it is generally due to one of the following three reasons: Abnormal tire pressure: Typically, it alerts when pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset promptly, the system continues to record the previous data, causing the indicator light to stay on. Simply reset the tire pressure to resolve this. Damaged tire pressure sensor: The sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. For sensor damage, replacement with a new part is the only solution.

17

5

Share

Can You Continue Driving When the ABS Light Is On?

ABS fault light is on, it is recommended not to continue driving, because the ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may lose control and skid, making it difficult for the driver to slow down or adjust the vehicle's trajectory, which poses significant safety risks. There are various states when the ABS light is on, with different causes and solutions for each state, as detailed below: State 1: ABS fault light stays on (most common). Cause 1: The ABS wheel speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle's speed and the wheel's slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal due to loose connections in the system wiring or poor contact in the ABS relay, leading to system failure. Solution: Check the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently turns on, but turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases, the voltage rises, and the ABS light turns off. The ABS system's power supply voltage is too low, possibly due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start until the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; poor contact in the ABS hydraulic valve body's wiring connector; ABS computer malfunction. Solution: Loosen the grounding screw on the hydraulic valve body, then retighten it, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. State 4: ABS warning light turns on during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant difference between the rear and front wheel speeds; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently turns on. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: Start the engine, press the brake pedal, push the brake switch linkage down fully with a finger, then release the brake pedal to complete the self-setting position; replace the brake light switch if necessary.

8

5

Share

What is the tire pressure reset method for Hyundai ix25?

The tire pressure reset method for Hyundai ix25 is: 1. Press and hold the tire pressure setting button for 3 seconds to reset the tire pressure monitoring; 2. Visit a 4S shop and ask a professional technician to reset it. Taking the 2020 Hyundai ix25 as an example, its body dimensions are: length 4300mm, width 1790mm, height 1620mm, wheelbase 2610mm, and minimum ground clearance 154mm. The 2020 Hyundai ix25 is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 115ps and a maximum power of 84.4kw, paired with a 6-speed manual transmission.

13

3

Share

What is the function of valves?

Valves are specifically responsible for introducing air into the engine and expelling exhaust gases after combustion. Here are the relevant details: Types of valves: Engine valves are divided into intake valves and exhaust valves. The intake valve's function is to draw air into the engine to mix with fuel for combustion; the exhaust valve's role is to expel the burned exhaust gases and dissipate heat. Composition and performance of valves: A valve consists of a valve head and stem. The valve head operates at very high temperatures and endures gas pressure, valve spring forces, and inertial forces from transmission components. With poor lubrication and cooling conditions, valves must possess certain strength, stiffness, heat resistance, and wear resistance.

12

4

Share

What does AMT mean in cars?

What happens if you fill a car designed for 92 octane with 95 octane gasoline?

Does idling with the air conditioning on affect the engine?

What is the appropriate tire pressure for a Corolla 1.2T?

Can You Continue Driving When the ABS Light Is On?

What is the tire pressure reset method for Hyundai ix25?

What is the function of valves?

What does the Auto button on a car mean?

Do you need to turn on the AC when using the car air conditioner in summer?

What Causes the Hissing Sound Like Air Leakage When the Car Air Conditioner is On?

What is Kontrol tire?