What does Aipao 98 gasoline mean?

2 Answers
McOlive
07/25/25 5:51am
Aipao 98 gasoline is a high-quality gasoline independently innovated and developed by Sinopec, which can significantly improve automobile engines. The following is a specific introduction to the gasoline: 1. Important characteristics of gasoline: volatility, stability, anti-knock performance, corrosiveness, and cleanliness. 2. Vapor pressure: Saturated vapor pressure is an indicator to measure whether gasoline is prone to vapor lock in the fuel supply system of gasoline engines, and it can also relatively measure the tendency of gasoline loss during storage and transportation. The higher the vapor pressure, the stronger the volatility, which makes cold starts easier but also increases the tendency of vapor lock and evaporation loss. The ability of gasoline to resist oxidation under normal temperature and liquid phase conditions is called the oxidation stability of gasoline, referred to as stability. The indicators for evaluating gasoline stability include iodine value, actual gum, and induction period.
Was this review help?
20
5
Share
MacMiles
08/10/25 5:55pm
As someone who frequently researches automotive fuels, I noticed someone asking about the meaning of Sinopec's Aipao 98 gasoline, so let me explain. It's actually a high-octane fuel under Sinopec's brand, where the '98' refers to its octane rating of 98. The higher the octane number, the greater the fuel's resistance to knocking. This type of gasoline is particularly suitable for high-compression engines, such as those in sports cars or high-performance SUVs, ensuring smoother engine operation, stronger power output, and reduced 'engine knocking' issues. It also contains detergent additives that help remove carbon deposits, protecting fuel injectors and cylinder walls. For regular city driving, 92 or 95 octane fuel is usually sufficient, but if you enjoy high-speed driving or frequently operate at high RPMs, 98 octane may prove more economical and could potentially extend engine life in the long run. In short, choosing Aipao 98 depends on your vehicle type and driving habits—don't blindly opt for expensive fuel; consulting your dealership is the wisest approach.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

Where is the fuel pump fuse located in an Audi A6?

Audi A6L fuel pump fuse is located either under the dashboard on the left side or in the relay box on the left side of the engine. Function of the fuel pump: The fuel pump's role is to draw gasoline from the fuel tank and deliver it through the pipelines and fuel filter to the carburetor's float chamber. It is because of the fuel pump that the fuel tank can be placed at the rear of the vehicle, away from the engine, and below the engine. Fuel pump fuse: The fuel pump fuse is an electrical control device that causes a predetermined step change in the controlled quantity in the electrical output circuit when the input quantity (excitation quantity) changes to meet specified requirements. It establishes an interactive relationship between the control system (also known as the input circuit) and the controlled system (also known as the output circuit).
6
3
Share

How Often Should a Car Compressor Be Replaced?

Generally, a car compressor should be replaced every 10 years. However, the exact replacement interval depends on the quality of the compressor and its frequency of use, as the quality of compressors varies across different car models, and usage frequency differs based on climate conditions and individual habits. Methods to determine if a car compressor is faulty include: 1. The compressor fails to rotate, produces abnormal noises during rotation, exhibits abnormal pressure levels (high pressure too low or low pressure too high); 2. The air conditioning compressor is not electrically powered but driven by the engine's gears or belts. When the air conditioning is off, the compressor idles; 3. When the AC switch is turned on, the engine RPM does not increase. If cooling is not required, removing the compressor's belt can improve power by more than half a gear without affecting the car.
9
4
Share

How to Use the One-Touch Window Control in Volkswagen Lavida?

Pull up or press down the corresponding window switch and hold it to raise the window glass to the top, then release the switch and pull up or press down again. Here is relevant information: 1. The front door power window switches in Lavida are equipped with both momentary and automatic modes, while the rear door power window switches only have manual mode. After operating the window up and down several times consecutively, to prevent damage caused by overheating of the window motor, the window control function may be temporarily disabled for a few seconds. Please wait until the function resumes before operating again. 2. Power windows are devices that use the vehicle's power supply to drive the window regulator motor, enabling the regulator to move up and down, thereby raising or lowering the window glass to achieve automatic opening and closing. Power windows allow the driver or passengers to operate the window switches while seated, making it convenient and enhancing driving safety. They have become the preferred choice for window design among automakers.
6
3
Share

Can the Air Conditioning Be Turned On When the Car Is Off?

You can turn on the air conditioning when the car is off, but it will not provide cooling functionality. Additionally, prolonged use can easily drain the battery, so it is not recommended to keep the air conditioning on for extended periods while the car is off. If you need to ventilate the car using the air conditioning, switch to the external circulation mode to allow fresh air to enter the cabin. The maintenance methods for car air conditioning include: 1. Clean the air vents promptly; 2. Maintain the air conditioning condenser regularly; 3. Clean or replace the air conditioning filter in a timely manner. The functions of car air conditioning are: 1. Filtering the air entering the cabin; 2. Absorbing moisture from the air; 3. Keeping the air clean and preventing bacterial growth; 4. Preventing fogging on the windows; 5. Adjusting the cabin temperature.
8
1
Share

How to Reset the Nissan Qashqai Maintenance Light?

Nissan Qashqai maintenance light reset method is generally as follows: Turn off the car key, wait for all the lights on the dashboard to go out, press and hold the reset button on the right side of the dashboard with your left hand, then turn on the ignition with your right hand without starting the engine, continue holding the button, and the light will automatically turn off. The steps to reset the Nissan Qashqai maintenance light are as follows: 1. With the engine off, press and hold the short-distance trip meter reset button below the tachometer. 2. Turn the ignition switch to the ON position, release the short-distance trip meter reset button, and the "SERVICE" message will appear on the display. 3. Pull out the minute button on the clock, turn the minute button to the right, and the mileage will appear on the display. 4. Turn off the engine to reset the reminder message. 5. Turn the ignition switch to the ON position, and the "SERVICE" message will disappear.
12
5
Share

What is the range of the BYD e1?

The range of this vehicle as given by the Ministry of Industry and Information Technology is 305 kilometers. Here is more information about the BYD e1: 1. The BYD e1 is a pure electric microcar, and its exterior design is identical to the BYD F0. The BYD e1 is a single-motor model, with a maximum motor power of 45 kW and a maximum torque of 110 Nm. The motor is front-mounted, making the car front-wheel drive. 2. The front suspension of the BYD e1 uses a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. Microcars typically use torsion beam suspensions for the rear because they occupy less space, and there is usually not enough room in the rear of a microcar to install a more complex independent suspension. Using a torsion beam suspension also helps to maximize rear passenger space and trunk space, which is crucial for microcars. 3. The dimensions of the BYD e1 are 3465 mm in length, 1618 mm in width, and 1500 mm in height, with a wheelbase of 2340 mm.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.