···
Log in / Register

What does ACC line mean?

3 Answers
Phil
09/04/25 3:02am
ACC line is the power-on wire. The following is the relevant content about ACC line: ACC line: ACC line is the power-on wire, which means it connects to the ACC power line controlled by the key. ACC stands for Adaptive Cruise Control power in Chinese. It is generally controlled by the car key and supplies power to some components such as the car audio system. The Adaptive Cruise Control system is an intelligent automatic control system developed based on the existing cruise control technology. Functions of ACC line: ACC not only has all the functions of automatic cruise control but can also monitor the road traffic environment in front of the car through sensors such as onboard radar. When it detects other vehicles ahead in the current driving lane, it will control the car's throttle and brakes based on information such as the relative distance and speed between the car and the vehicle ahead, maintaining an appropriate safe distance between the two vehicles.
Was this review help?
9
3
Share
LunaRose
09/16/25 4:14am
The ACC wire refers to the accessory power line in the car's ignition switch. When the car key is turned to the ACC position, this wire becomes powered, specifically designed to supply electricity to devices such as the radio, cigarette lighter, or dash cam. Its most notable feature is that it provides power without starting the engine, allowing you to listen to music or charge devices while waiting in the car without worrying about draining the battery. When installing electronic devices in the car, such as a car charger, I specifically connect it to the ACC wire to ensure automatic power-off when the engine is turned off, which is much safer than directly connecting to the battery. Some modification shops also use the ACC wire to check if devices are functioning properly, as its power supply status directly reflects the ignition switch's condition.
Was this review help?
20
0
Share
Expand All
DeAngelo
10/30/25 4:48am
The ACC wire, simply put, is a dedicated power line that controls the vehicle's electrical accessories. It only powers on when the car key is turned to the ACC position. At this point, the steering wheel lock will disengage, allowing you to use the radio or charge your phone, but the engine won't start. For example, when I installed a cigarette lighter charger in my car, I specifically connected it to the ACC wire. This way, the power immediately cuts off when the car is turned off, preventing battery drain from forgotten devices. If you're wiring it yourself, it's best to locate the ignition switch harness under the steering wheel and use a multimeter to identify the wire that only powers on in the ACC position. Car audio enthusiasts know that the ACC wire can also be connected to the amplifier's control line, enabling the audio system to automatically turn on and off with the vehicle.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

What Does It Feel Like When a Car Has a Misfiring Cylinder?

Engine misfiring can cause symptoms such as increased fuel consumption, black smoke emission, lack of power, and increased driving noise. Below is an introduction related to engine cylinders: 1. Introduction: A cylinder is a cylindrical chamber within the engine where a piston is driven by the pressure or expansion force of the working fluid. Some special types of engines may have similar, but non-cylindrical parts. 2. Types: In pneumatic transmission, cylinders are actuators that convert the pressure energy of compressed gas into mechanical energy. Cylinders can be categorized into two types: those that perform linear reciprocating motion and those that perform oscillating reciprocating motion. Cylinders performing linear reciprocating motion can be further divided into four types: single-acting, double-acting, diaphragm-type, and impact cylinders.
19
5
Share

Where is the reverse light fuse located in a BMW 3 Series?

The fuse for the BMW 3 Series is located in the fuse box, which can be found in the trunk and in the engine compartment in front of the passenger side. When cleaning the engine compartment, be careful not to directly rinse the fuse box with water, as it is not perfectly sealed. Doing so may cause a short circuit in the fuse, leading to failure of the vehicle's electrical components. Steps to replace the fuse: 1. Locate the fuse box based on your specific model. Generally, the fuse box is near the battery. The fuse box is usually secured with clips, and some high-end models may have bolts. Carefully remove the box to access the fuses. 2. Carefully refer to the diagram to identify the fuse. Before removing the fuse, read the diagram carefully. The side where the fuse is easily accessible usually aligns with the diagram. 3. Use tweezers to remove the fuse and replace it with a new one. The fuse box usually contains spare fuses, placed away from other fuses for easy identification. Use tweezers to remove the fuse and check if it is blown. If it is, replace it with an appropriate spare fuse.
13
5
Share

What Causes Abnormal Noise When Starting the Car but No Sound While Driving?

There are several possible causes for abnormal noises coming from the engine compartment. Most people can identify the source of the noise as the engine compartment based on the sound, which is usually a metallic screeching or a wind-like noise. Below is an introduction to the engine: 1. Introduction: An engine is a machine that converts non-mechanical energy into mechanical energy. 2. Classification: Engines include internal combustion engines, external combustion engines, jet engines, electric motors, etc. An external combustion engine converts the heat energy generated by combustion into kinetic energy, and the steam engine improved by Watt is a typical example of an external combustion engine. An internal combustion engine, or reciprocating piston engine, differs from an external combustion engine in that the fuel burns inside it. A jet engine is an engine that directly generates thrust by the high-speed jet of gas from the nozzle.
18
2
Share

Will I Definitely Get Points Deducted for Running a Red Light in the Morning?

In general, as long as there are automatic monitoring devices installed at intersections to capture evidence, any traffic violations will be automatically photographed and recorded. Criteria for determining a red light violation: Electronic monitoring captures three photos as evidence for a red light violation: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. Only when all three photos are present will it be considered a red light violation. Point deduction standards for running a red light: According to Article 2, Section 1, Clause 2 of the 'Scoring Standards for Road Traffic Safety Violations,' driving a motor vehicle in violation of traffic signal lights will result in a deduction of 6 points. Article 3, Section 1, Clause 8 states that driving a motor vehicle in violation of prohibition signs or markings will result in a deduction of 3 points. How to check for red light violations: You can check for red light violations through the 'Traffic Management 12123' app. After opening the app, log in using your ID card, then find and click on the 'Violation Handling' option. Under 'Violation Handling,' you can see the current status of your vehicle. If there are any violations, the specific details will be displayed. You can also check at the service halls of the traffic police departments in various districts and counties by using the touch query terminals. Alternatively, visit the official websites of the local public security traffic management bureaus, find the 'Vehicle Violation Query' section, enter your license plate number and engine number, and click 'Query' to check.
16
0
Share

Which city in Jiangsu does the license plate 'Su W' belong to?

There is no 'Su W' license plate. License plates consist of 7 characters, where the first character is the abbreviation of the province, the second character is the abbreviation of the municipality directly under the province, and characters 3 to 7 are a combination of numbers and letters. The functions of a license plate are: 1. To number and register information for each vehicle; 2. To identify the region to which the vehicle belongs; 3. To access the owner's and vehicle's registration information based on the license plate. Types of license plates include: 1. White plates represent military and police vehicles; 2. Blue plates represent ordinary small vehicles with fewer than 7 seats; 3. Yellow plates represent ordinary large vehicles; 4. Black plates represent foreign investors in China.
17
5
Share

Do Automatic Transmission Cars Need Break-in?

Automatic transmission cars do require a break-in period, with a recommended mileage of 1,000 to 3,000 kilometers. Introduction to automatic transmission gears: 1. P gear is the parking gear, used for long-term parking of the vehicle; 2. R gear is the reverse gear, engaged when the vehicle needs to move backward; 3. N gear is the neutral gear, engaged when the vehicle is parked for a short time without turning off the engine; 4. D gear is the drive gear, when the gear lever is in D gear, the vehicle will automatically shift gears based on throttle opening and speed data; 5. S gear is the sport mode, making the vehicle drive more sportily; 6. M gear refers to the manual mode, when the gear lever is in M gear, gear shifting is done manually by the driver; 7. L gear is the low gear.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.