What does AC mean in a vehicle?

1 Answers
StManuel
07/29/25 8:20pm
Vehicle AC is the abbreviation for Aircondition, meaning air conditioning. The AC button serves as the switch for the car's air conditioning system. Overview of AC: The A/C switch is essentially the air conditioning switch, controlling whether the compressor operates. Inside the compressor, there is an electromagnetically controlled clutch. When the coil is energized, the electromagnetic clutch engages, and the compressor works. Otherwise, the compressor's pulley simply spins without the compressor functioning. If the button's light is on, it indicates the air conditioning is operating. In winter, when using the engine's heat, this function is unnecessary, but in summer, it is required for cooling. Precautions: Some drivers have the bad habit of not turning off the air conditioning before parking and shutting off the engine. This can cause the air conditioning to start automatically the next time the engine is started, increasing the engine's load and raising fuel consumption during startup. Therefore, it is recommended to turn off the air conditioning a few minutes before parking, which not only protects the engine but also saves fuel.
Was this review help?
9
2
Share
More Forum Discussions

What is the fuel consumption of the Encore Bear?

The average fuel consumption of the Encore Bear is 7.48. Fuel Consumption: Commonly referred to as the amount of fuel consumed by a car after traveling 100 kilometers. The economic indicator of a car is mainly represented by fuel consumption, which is an important performance aspect in the usability of a car. Constant-Speed Fuel Consumption: Constant-speed fuel consumption refers to the fuel economy indicator when a car is traveling at a constant speed on a good road surface. Since constant-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted. Road Cycle Fuel Consumption: Road cycle fuel consumption is the fuel economy indicator measured when a car is driven in repeated cycles according to specified speeds and time norms on the road, also known as multi-condition road cycle fuel consumption.
15
2
Share

Where is the drain valve of the Venucia D50 radiator located?

The drain valve of the Venucia D50 radiator is located in the middle of the lower end of the radiator. Introduction to the car radiator: The drain valve of a car radiator is generally located at the lower right or lower left of the radiator, and its position varies depending on the vehicle model. The car radiator is mainly composed of the radiator core, water pipes, cooling fins, upper tank, and lower tank. Function of the car radiator: The upper tank is located on the radiator, connected to the lower tank via water pipes. When hot water flows from the upper tank to the lower tank, it cools down to warm water. The cooling fins form air passages, and through the suction of the fan and the relative wind speed when the car moves forward, a large amount of cold air passes through these air passages, absorbing the heat from the cooling water flowing through the pipes and then dissipating it into the atmosphere.
5
2
Share

Why is the steering wheel of Geely cars so heavy?

Geely cars have heavy steering wheels due to the following reasons: Poor lubrication of the steering system: If the bearings in the steering system are too tight or poorly lubricated, or if the tire pressure is insufficient, the steering wheel will become heavy. Mechanical hydraulic power steering cars: If the car uses a mechanical hydraulic power steering pump driven by the engine belt to provide steering assistance, this type of power steering system will have a clear road feel, meaning the steering wheel will feel heavier. Dirty power steering fluid: This situation is similar to how dirty engine oil affects engine power and performance. Dirty power steering fluid can cause the steering wheel to become increasingly heavy, and a lack of power steering fluid can also make the steering wheel feel heavier. If the issue is related to the power steering fluid, it should be promptly added or replaced.
19
5
Share

Does the Geely Boyue have a hybrid version?

Geely Boyue has a hybrid version. Hybrid version cars: The "hybrid version" of a car refers to a hybrid electric vehicle, which means the vehicle's propulsion system is composed of two or more individual drive systems that can operate simultaneously. The vehicle's driving power is provided by a single drive system alone or jointly, depending on the actual driving state of the vehicle. Series hybrid electric vehicles: Series hybrid electric vehicles (SHEV) mainly consist of three major powertrains: the engine, generator, and drive motor, connected in series to form the HEV's power system. Parallel hybrid electric vehicles: In parallel hybrid electric vehicles (PHEV), both the engine and the drive motor are powertrains. The power of these two major powertrains can be outputted by superimposing each other or outputted separately.
7
1
Share

What is the P1336 trouble code?

The trouble code P1336 indicates a crankshaft position sensor target gear error fault. It is necessary to use a decoder to perform target gear error learning for the crankshaft position sensor on the vehicle, so that the ECU can accurately know the specific position of the crankshaft operation, thereby determining the top dead center of each cylinder. Below are the steps for performing target gear error learning: 1. After starting the engine, wait until the engine temperature reaches 60 degrees Celsius, the vehicle has been running for more than 10 seconds, and all other loads on the vehicle are turned off. 2. Use a diagnostic tool (after upgrading) to enter the "Gear Self-Learning" option. 3. Follow the prompts on the diagnostic tool to quickly press the accelerator pedal to the floor and keep it fully open. At this time, the ECM should perform gear signal learning. 4. Turn off the engine, wait for 10 seconds, then restart the engine to complete the learning process.
3
1
Share

Which year is the Volkswagen SVW71412CR from?

Volkswagen SVW71412CR is the earliest Volkswagen Santana from 1985. Introduction to the history of Santana: The Santana (SANTANA) sedan is a brand car produced by Volkswagen in California, USA. Starting from 1985, after more than 20 years of production history, the ordinary Santana sedan (Santana 87) could be seen all over the country. In October 2012, Shanghai Volkswagen announced the discontinuation of the old version of Santana (Santana 87). Introduction to the new Santana: The new Santana completely abandons the boxy styling of the 1970s seen in the old Santana, replacing it with a more modern and fashionable dynamic design. Overall, it already features the latest exterior styling of the Volkswagen family. The front face's family design makes it difficult to distinguish between several compact models under the Volkswagen brand.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.