What does ABS mean?

Is 150 km/h a Fast Speed?

Speed of 150 km/h is considered fast. Below is relevant information about vehicle speed: Introduction: Running speed refers to the average speed of a vehicle over a certain road section. It is the quotient obtained by dividing the length of the road section by the pure driving time (total journey time minus all stopping times), used to analyze the driving difficulty and traffic capacity of that road section. It can be obtained through test vehicle surveys. To ensure the accuracy of test data, it is generally required that the test vehicle travels 12-16 times on the road section, and the speed value is calculated through statistics. Relevant Regulations: According to the implementation regulations of relevant laws, motor vehicles driving on roads must not exceed the speed indicated by speed limit signs. On roads without a central dividing line, the maximum speed must not exceed 40 km/h; the maximum speed on urban roads must not exceed 30 km/h. On roads with only one motor vehicle lane in the same direction, the speed must not exceed 70 km/h, and on urban roads, it must not exceed 50 km/h. Driving at excessively high speeds can easily lead to traffic accidents.

5

3

Share

How to Deactivate the Anti-Theft Mode on Buick LaCrosse?

Turn the key to the on position and wait until the anti-theft light flashes, then turn the key off. Turn it back on and wait for ten minutes until the anti-theft light flashes again. Repeat this process three times to complete the procedure. More details about the LaCrosse are as follows: 1. Body Dimensions: The body dimensions of the LaCrosse are quite impressive among vehicles in its class. It can even be said without exaggeration that it ranks among the top. The wheelbase determines the interior space of a car. The wheelbase is the distance between the centers of the tires on the same side. 2. Powertrain: There are two options available. The first: equipped with a 1.5L inline 4-cylinder turbocharged engine, paired with a 9-speed automatic transmission, delivering a maximum power of 125KW and a maximum torque of 252N·m. The second: equipped with a 2.0L inline 4-cylinder turbocharged engine, paired with a 9-speed automatic transmission, delivering a maximum power of 192KW and a maximum torque of 350N·m.

15

4

Share

Should Engine Flush Be Used Before an Oil Change?

Engine flush should be used before an oil change. When changing the oil, purchase a bottle of engine flush additive, add it to the engine, let it idle for a few minutes, then drain the old oil before adding new oil. Otherwise, residual oil can reduce the effectiveness of synthetic oil. Engine oil, also known as engine lubricant (English name: Engine-oil), serves multiple functions for the engine: lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption and cushioning. Below are the key functions of engine oil: 1. Friction Reduction: A sufficiently thick oil film separates the surfaces of moving parts, thereby minimizing wear. 2. Sealing: Engine oil forms a seal between piston rings and pistons, reducing gas leakage and preventing contaminants from entering. 3. Rust Protection: Lubricant adheres to part surfaces, shielding them from water, air, acidic substances, and harmful gases. 4. Shock Absorption: When cylinder pressure surges suddenly, intensifying the load on pistons, piston rings, connecting rods, and crankshaft bearings, the lubricant distributes this load, cushioning the impact. 5. Cleaning: High-quality oil carries away carbon deposits, sludge, and metal wear particles from engine components back to the oil pan, flushing contaminants from part surfaces through oil circulation.

14

2

Share

What to Bring for On-Site Driver's License Education?

No items are required to be brought. Below are the specific details regarding the relevant content: Introduction: After completing the review education, you only need to patiently wait for the review results. Once the review education is successfully accepted, the driver also needs to complete the "review process." Only after finishing the review process is the entire review considered complete. The "driver's license review process" usually involves selecting "complete the process after education" when applying for "review education." As long as the review education is passed, the system will automatically handle the review process, and no further action is required from the applicant. Completion of Review Education: If the review education has been successfully completed and the option to automatically complete the review process after education was selected, it means the review is already finished, and the driver's license can be used normally. If unsure, you can also check the status of your driver's license on the Traffic Management 12123 app. Upon successful review, the review date of the driver's license will be updated. The status of the driver's license can be viewed on the 12123 homepage.

6

2

Share

What is the rim width?

The rim size consists of two parameters: the bead seat diameter and the bead seat width. Common notations include 15x6.5; 15x6.5JJ; 15x6.5J; 1565, etc. There are no strict formatting rules. The first number "15" indicates the bead seat diameter, meaning the rim's bead seat diameter is 15 inches. The second number "6.5" represents the bead seat width, indicating the rim's bead seat width is 6.5 inches. When replacing rims, pay attention to the following parameters: 1. Center Bore (CB): Refers to the size of the rim's center hole. Although rims with different center bore sizes can be installed using adapters, this is not recommended for safety reasons. 2. Pitch Circle Diameter (PCD): For example, a rim with a PCD of 5x120mm means it has 5 lug bolts forming a circle with a diameter of 120mm. This value should also match the original specifications. 3. Offset (OFFSET): Also known as the ET value. A positive offset means the mounting surface is outside the centerline, while a negative offset means it's inside. Passenger cars typically have positive offset values, and this parameter significantly affects driving stability and cornering traction.

9

3

Share

What Causes Carbon Buildup on Spark Plugs?

Spark plug carbon buildup can be caused by an excessively large engine ignition advance angle or improper spark plug selection. After cleaning, new spark plugs should be replaced. Steps for replacing spark plugs: Open the hood, lift the plastic engine cover, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. During removal, check for external debris such as leaves or dust and ensure thorough cleaning. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage distributor wires in the firing order, then secure the cover. Spark plug replacement intervals: Under normal maintenance conditions, spark plugs should be replaced every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's recommended to follow the owner's manual. The following standards can be used as a reference for maintenance and replacement: Platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.

3

4

Share

What does ABS mean?

Is 150 km/h a Fast Speed?

How to Deactivate the Anti-Theft Mode on Buick LaCrosse?

Should Engine Flush Be Used Before an Oil Change?

What to Bring for On-Site Driver's License Education?

What is the rim width?

What Causes Carbon Buildup on Spark Plugs?

What is the Principle of Drum Brakes?

Should You Downshift When Parking in a High Gear?

Should I Perform the Maintenance Items Recommended by the 4S Shop?

How to reset the maintenance light on the Zhonghua V3?