What does abs-001 mean?

What are the differences between Rolls-Royce Ghost and Phantom?

The differences between Rolls-Royce Ghost and Phantom: 1. Vehicle dimensions: Rolls-Royce Phantom, 5834mm×1990mm×1632mm (standard version). Rolls-Royce Ghost, 5399mm*1948mm*1550mm (base model). 2. Curb weight: Rolls-Royce Phantom curb weight: 2250 kilograms (standard version). Rolls-Royce Ghost curb weight: 2435kg. 3. Acceleration time: Rolls-Royce Phantom acceleration time: 6 seconds (0-100km/h). Rolls-Royce Ghost acceleration time: 4.9 seconds (0-100km/h). 4. Powertrain: The Phantom series is equipped with a 6.7-liter V12 twin-turbocharged engine, delivering a maximum horsepower of 571 hp, maximum power of 420kw, and maximum torque of 900N·m. The Ghost series is equipped with a 6.6-liter V12 twin-turbocharged engine, available in high and low power versions. The high-power version offers a maximum horsepower of 612 hp, maximum power of 450kw, and maximum torque of 840N·m. The low-power version provides a maximum horsepower of 571 hp, maximum power of 420kw, and maximum torque of 820N·m.

14

5

Share

When is the first maintenance generally due for the Volkswagen Bora?

The first maintenance for the new Volkswagen Bora is due within six months or 7,500 kilometers, whichever comes first. The first service follows the principle of whichever condition is met first. However, it is advisable to perform the first maintenance earlier because during the break-in period, the engine cylinders undergo a wear-in process, resulting in more metal particles in the engine oil and oil filter, and the oil gets dirty faster. Continuing to use the vehicle under these conditions can accelerate engine wear. Below are some relevant details: 1. The new Bora comes with a two-year or 60,000-kilometer warranty (whichever comes first). For the 1.6L model, it is recommended to perform routine maintenance every 15,000 kilometers, while the 1.4TSI model should be serviced every 10,000 kilometers, including oil and oil filter replacement. 2. Within 60,000 kilometers, both models are recommended to have the fuel filter, cabin air filter, and spark plugs replaced every 30,000 kilometers, and the transmission fluid replaced every 60,000 kilometers. However, there is a difference in the replacement intervals for the air filter. The 1.6L model is recommended for replacement every 30,000 kilometers, while the 1.4TSI model should be replaced every 20,000 kilometers.

11

1

Share

What Systems Make Up a Car Chassis?

The components of a car chassis are as follows: 1. Powertrain System. The function of the powertrain system is to transmit the engine's power to the driving wheels. The composition of the chassis varies slightly depending on the vehicle type. For example, in trucks and some passenger cars, the chassis typically consists of a clutch, manual transmission, universal joint drive, and drive axle. 2. Running Gear System. The running gear system serves to support and install various component assemblies of the vehicle, transmitting and bearing various loads from both inside and outside the vehicle to ensure normal operation. It mainly comprises the frame (body), axles, suspension, and wheels. 3. Steering System. The steering system ensures the car can move in the direction selected by the driver. It primarily consists of the steering control mechanism, steering gear, and steering linkage. Modern vehicles commonly use power steering systems. 4. Braking System. The braking system enables the car to decelerate, stop, and remain reliably parked. A typical automotive braking system includes two independent braking systems: the service brake system and the parking brake system. Each braking system consists of brakes and brake transmission mechanisms. Modern vehicles' service brake systems are generally equipped with an Anti-lock Braking System (ABS).

1

4

Share

Where is the camshaft sensor located on the Teana?

The camshaft position sensor of the Teana is located on the engine block. The camshaft position sensor is a sensing device, also known as a synchronization signal sensor. It serves as a cylinder identification and positioning device, inputting camshaft position signals to the ECU and functioning as the primary control signal for ignition. The detection method for the camshaft position sensor is as follows: 1. Unplug the connector, turn the key to the second position, and use a voltmeter to measure and confirm that the power line has voltage output. 2. Use the meter to identify the ground wire. With the voltmeter, connect one probe to the confirmed power line and the other probe to the remaining two wires. The wire that shows voltage is the ground wire, and the remaining one is the signal wire. 3. Now, turn off the key, lead out the signal wire, plug back the connector, start the engine, and measure the signal wire and ground wire to see if there is a signal voltage output (the output voltage should be less than the supply voltage). If there is no voltage, the sensor is likely faulty. 4. While performing the above steps, also check the condition of the signal teeth on the camshaft, ensure there are no obstructions between the camshaft sensor and the signal teeth, and verify that the gap is normal.

1

5

Share

What are the reasons why a Roewe car won't start?

Roewe car won't start for the following reasons: 1. Battery depletion: When the car battery is depleted, the car will have difficulty starting. There are many reasons for car battery depletion, such as lack of water in the battery, battery malfunction, or prolonged use of air conditioning. When the car won't start, the first thing to check is whether there is a problem with the car battery, identify the specific issue, and then send it to a 4S shop for repair. 2. Low temperature: In cold winter weather, cars often have difficulty starting. This is because in low-temperature environments, the viscosity and rotation speed of car engine oil decrease, leading to reduced ignition energy from the battery and decreased molecular activity. As a result, flammable gases cannot form, making it difficult to start the car. If this happens, there's no need to panic; it's not a car malfunction but a normal phenomenon. Try pressing the clutch before starting the engine; it might help. 3. Carbon buildup in the car: Carbon buildup in the car engine can cause many problems, the most common being difficulty starting the car. There are many reasons for engine carbon buildup, such as excessive water in gasoline, poor fuel quality, poor valve seat sealing, etc. So if the car is hard to start, check if there is a lot of carbon buildup in the engine, and clean it promptly if necessary.

5

2

Share

Can a Vehicle Be Locked Without Turning Off the Engine?

It is not possible to lock a vehicle without turning off the engine. Even for certain models that allow locking the doors while the engine is running, the engine will automatically shut off after locking. This is primarily for safety considerations. Even vehicles equipped with a one-touch start function cannot have their doors locked without turning off the engine. Below are some tips to prevent forgetting to turn off the engine when exiting the vehicle: 1. Check the RPM gauge and display screen: Before exiting, check if the display screen has turned off and gone black, and if the RPM gauge reads zero. This is a conventional method and should become a habit. However, sometimes distractions like having multiple passengers, answering phone calls, or being in a hurry to exit can lead to overlooking this habit. 2. Steering wheel elevation: When setting the steering wheel position, avoid setting it at the highest position. This way, when parking and turning off the engine, the steering wheel will rise slightly. This subtle change may not always be noticeable but serves as a weak reminder. 3. Enable daytime running lights: In the lighting settings, turn on the daytime running lights. This method is quite effective—after locking the doors, check if the daytime running lights are off, which confirms the engine is definitely off. However, some people may find daytime running lights too conspicuous and prefer not to use them regularly, making this method unusable for them.

16

1

Share

What does abs-001 mean?

What are the differences between Rolls-Royce Ghost and Phantom?

When is the first maintenance generally due for the Volkswagen Bora?

What Systems Make Up a Car Chassis?

Where is the camshaft sensor located on the Teana?

What are the reasons why a Roewe car won't start?

Can a Vehicle Be Locked Without Turning Off the Engine?

Where is the cylinder head temperature sensor on the Ford Mondeo?

What is the fuel tank capacity of the Bestune X40 in liters?

Which is better, hybrid or plug-in hybrid?

What is the fuel tank capacity of the Focus?