What does a yellow exclamation mark on the dashboard indicate?

What is the fuel tank capacity of the Mazda CX-5 in liters?

The fuel tank capacity of the Mazda CX-5 is 56 liters for the two-wheel-drive version and 58 liters for the four-wheel-drive version, as officially announced. The Mazda CX-5 uses 92-octane gasoline. The two-wheel-drive version has a fuel consumption of 7.1-7.4L per 100 km, allowing a range of 757-789 km on a full tank. The four-wheel-drive version consumes 7.7L per 100 km, with a range of 753 km on a full tank. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. In actual refueling, the amount of fuel may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to a safe fill level, leaving some space between the safe fill level and the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.

14

3

Share

What is the Quattroporte?

Quattroporte is a model from the Maserati brand. Introduction to the exterior of the Maserati Quattroporte: The facelifted 4.7L Quattroporte S enriches the product lineup of the series. The meticulous craftsmanship seen in the Quattroporte is also not overlooked in the higher-level Quattroporte. The new wave of LED lighting technology sweeping the global top-tier automotive industry has made its way to Maserati, an Italian sports car brand, with the experienced Quattroporte and the facelifted Quattroporte being the core of this storm. Looking from the front, it is clear to see that the facelifted grille design has changed from a mesh pattern to a waterfall style, while the new Bi-Xenon headlights with active steering function feature 10 LED lights added below. Introduction to the powertrain: In terms of powertrain, the new-generation Maserati Quattroporte offers two engine options. The base model is equipped with a 3.0L twin-turbocharged V6 engine, delivering a maximum power output of 410 horsepower. The high-end model is powered by a 3.8L twin-turbocharged V8 engine, producing a maximum power output of 538 horsepower and a peak torque of 651Nm, achieving a 0-100 km/h acceleration time of 4.7 seconds. The transmission system is paired with an 8-speed automatic gearbox from ZF. According to the environmental protection catalog, the model expected to be introduced first in China is the one equipped with the 3.8L twin-turbocharged engine.

15

4

Share

Where is the warm air switch for the BYD Song?

The warm air switch for the BYD Song is located on the central control screen, marked with a thermometer symbol. Introduction to the central control screen: The central control color screen is a display located on the central console, primarily showing car audio, navigation, vehicle information, reverse camera images, etc. It can be a single-touch or multi-touch LCD screen. In most car models, the central control color screen is positioned near the central console, but some newer models integrate it with the instrument panel. A larger screen does not necessarily mean better clarity, as clarity depends on screen resolution. Installing an aftermarket color screen may require disassembling and modifying the central console, and improper handling can damage internal components, leading to future driving noises. Some car models' central control color screens not only display rich information but also support touch operations and human-machine interactions. Precautions for using warm air: Do not sleep in the car with the air conditioning on while the vehicle is stationary, as the engine not running can produce high concentrations of carbon monoxide inside the car. If the windows are closed, this could lead to poisoning or suffocation. Avoid smoking in the car when the warm air is on. When the air conditioning is running, the windows are usually closed, and certain components in the smoke can adhere to the evaporator surface, fostering mold growth on rainy days, which can pollute the car's interior when the air conditioning is used again. Do not turn on the AC button. Warm air utilizes the car's own heat cycle for heating, so there's no need to turn on the air conditioning, as it would increase fuel and electricity consumption.

1

Share

What is the replacement interval for the Mazda3 Air Filter?

According to the vehicle's maintenance manual, the Mazda3's air filter should generally be replaced every 10,000 to 20,000 kilometers or every other maintenance interval. However, it is recommended to clean the air filter every 5,000 kilometers to reduce the buildup of sludge in the throttle body. The location of the car's air filter depends on the intake method and the engine's structure. It is usually located in the air filter housing on the engine's intake pipe. There are two types of air filters in cars: dry and wet. Dry filters are made of paper or organic materials, while wet filters are made of metal mesh. The function of the air filter is to filter out particulate impurities from the air, ensuring that clean air enters the cylinders and preventing airborne dust from being sucked into the engine, which can accelerate wear on the piston group and cylinders. Air filter: It is a type of filter, also known as an air filter cartridge, air cleaner, or air element. It is mainly used in engineering vehicles, cars, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms. During operation, the engine inhales a large amount of air. If the air is not filtered, the suspended dust in the air can be sucked into the cylinders, accelerating wear on the piston group and cylinders. Larger particles entering between the piston and cylinder can cause severe cylinder scoring, especially in dry and sandy working environments. The air cleaner is installed in front of the carburetor or intake pipe to filter out dust and sand from the air, ensuring that sufficient and clean air enters the cylinders. Using a dirty air filter while driving can cause insufficient engine intake, leading to incomplete fuel combustion, unstable engine operation, reduced power, and increased fuel consumption. Therefore, it is essential to keep the air filter clean. The car's air filter is a device that removes particulate impurities from the air, consisting of one or several air filter components. Its main function is to filter out harmful impurities from the air entering the cylinders to reduce early wear on the cylinders, pistons, piston rings, valves, and valve seats. Therefore, before air enters the cylinders, it must pass through the fine filtration of the air filter. A dirty air filter can cause poor engine performance, excessive fuel consumption, and engine damage. When inspecting the air filter, if it is found to have minimal dust and light clogging, it can be cleaned using high-pressure air from the inside out and reused. A severely dirty air filter should be replaced promptly.

7

3

Share

What are the dimensions of the Avancier in terms of length, width, and height?

The body dimensions of the Avancier are 4816mm in length, 1942mm in width, and 1669mm in height. Introduction to the Avancier's exterior: The Honda Avancier's exterior draws inspiration from the Concept D concept car, featuring a wing-style chrome grille also seen in models like the new Honda Accord. The new car's headlights adopt LED light clusters, paired with 'C'-shaped front bumper light clusters that exude a strong sense of power. The side design carries a somewhat crossover sedan flavor. Introduction to the Avancier's powertrain: GAC Honda equips the Avancier with a 2.0T turbocharged engine, featuring dual VTC variable valve timing technology and VTEC variable valve lift technology on the exhaust side. It delivers a maximum power of 200kW (272Ps) and a maximum torque of 370Nm, achieving a 0-100km/h acceleration time of 7.45 seconds. The model comes with a 9-speed automatic transmission with SBW electronic push-button shifting instead of the traditional gear lever, offering three driving modes: snow, sport, and comfort, which is unique in its class, providing a driving experience that surpasses its peers. The new Avancier is available with two powertrain options: 1.5T and 2.0T. The mid-to-low trim models are equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 193Ps, maximum power of 142kW, and peak torque of 243Nm, paired with a CVT continuously variable transmission. The high-end models are equipped with a 2.0T direct-injection VTEC turbocharged engine, delivering a maximum horsepower of 272Ps, maximum power of 200kW, and peak torque of 370N.m, paired with a 9-speed automatic transmission.

11

0

Share

Where is the rearview mirror heating button on the Avalon?

The rearview mirror heating switch for the X-Trail is located on the far right of the air conditioning control panel in the center console. It shares the same button as the vehicle's rear window defroster, labeled "REAR." To activate it, simply press the button, but note that the vehicle must be powered on for the function to work. Rearview mirror heating is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rain or fog, eliminating the need for frequent manual wiping and reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the power-adjustable mirror control knob—simply rotate the knob to turn it on. The other is located on the air conditioning control panel, where pressing the heating button activates the function. No manual angle adjustment is needed, as the driver's side has a dedicated control button. How the rearview mirror heating function works: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a set temperature, usually between 35-60°C, within minutes. Heat is distributed across both left and right mirrors. As the temperature rises, water droplets on the mirror surface shrink due to evaporation, and fog gradually dissipates, effectively defrosting the mirrors. However, in heavy rain, the effect may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The heating function relies on electric heating wires embedded in the mirrors, which consume significant power. Ensure the vehicle is running when using this feature to avoid draining the battery, which could prevent the car from starting. Avoid using the heating function while the car is stationary for extended periods. Other methods for defogging rearview mirrors include: Opening windows slightly to create airflow between the inside and outside of the car, reducing temperature differences and allowing fog to dissipate naturally. Adjusting the car's air conditioning to the appropriate setting can also direct warm air to the mirrors, aiding in defogging.

1

2

Share

What does a yellow exclamation mark on the dashboard indicate?

What is the fuel tank capacity of the Mazda CX-5 in liters?

What is the Quattroporte?

Where is the warm air switch for the BYD Song?

What is the replacement interval for the Mazda3 Air Filter?

What are the dimensions of the Avancier in terms of length, width, and height?

Where is the rearview mirror heating button on the Avalon?

What is the fuel consumption of the Passat?

What is the fuel consumption of the Haval H6 2.0T?

What are the dimensions of the Crown Land Cruiser?

What is the actual lifespan of the Nissan X-Trail CVT transmission?