···
Log in / Register

What does a yellow exclamation mark on the car indicate?

4 Answers
LaNadia
08/29/25 7:52am

When a yellow exclamation mark appears on the car's dashboard, it can indicate one of four possible issues: general faults, automatic transmission faults, abnormal tire pressure, or lighting faults. Below is a detailed analysis of each scenario: General Faults: An exclamation mark inside a triangle indicates a malfunction in the car's general performance, components, or functions. Common causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor issues. It is recommended to visit a 4S shop for diagnosis and repair to identify the source of the fault. Automatic Transmission Fault: An exclamation mark inside a yellow gear signifies an automatic transmission fault warning, indicating a problem with the transmission or low transmission fluid levels. Prompt replacement of transmission fluid is necessary. Abnormal Tire Pressure: An exclamation mark under a horizontal line inside parentheses represents the tire pressure monitoring warning light. This light illuminates when the tire pressure is too low. Check the tire pressure and adjust it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, or interior lights to identify the issue. Additionally, a red exclamation mark inside a circle with parentheses indicates a braking system warning, typically due to a brake system malfunction or low brake fluid levels. Immediate inspection and repair of the braking system are required to prevent accidents.

Was this review help?
16
2
Share
DeMariana
09/11/25 5:21am

I've seen that yellow exclamation mark warning light on the dashboard while driving, which usually indicates a potential issue but isn't urgent yet. The most common cause is insufficient tire pressure, especially since modern vehicles are equipped with Tire Pressure Monitoring Systems (TPMS) that trigger an alarm when pressure drops too low. Other possible reasons include low brake fluid levels, minor ABS system malfunctions, or emission issues. I recommend that drivers first pull over safely, avoid driving too fast to prevent risks, and check each tire for obvious leaks or damage. If you don't have a tire pressure gauge, you can try inflating the tires at a nearby gas station. Ignoring a yellow warning light may escalate it to a red light, which is more dangerous, so it's best to take note and visit a professional repair shop as soon as possible. Remember, don't take driving safety lightly—regular maintenance can help avoid these minor troubles.

Was this review help?
18
2
Share
Expand All
LaAbigail
10/25/25 6:12am

As someone who frequently deals with cars, the yellow exclamation mark is mostly a tire pressure monitoring alarm. The vehicle monitors air pressure in real-time through sensors; if it's low, the system alerts you. Sometimes, a faulty sensor can cause false alarms, or low brake fluid levels might trigger the light. More complex issues could involve the ECU detecting abnormal emissions. I would first use a diagnostic tool to read the fault code or check the manual for the code, then inflate the tires or check fluid levels myself. It's advisable not to ignore these warnings; timely action can prevent bigger problems. Maintaining your vehicle well will reduce the frequency of these alerts.

Was this review help?
9
3
Share
Expand All
McChloe
12/08/25 6:36am

When you see the yellow exclamation mark, don't panic—it's most likely caused by insufficient tire pressure. There might be a minor leak or a nail puncture in one of the tires. After inflating, the light should turn off. Other possible causes include brake issues or minor engine faults. I recommend immediately pulling over to a safe spot to check the tire condition; if you don't have the tools, head to a repair shop. Safety comes first—don't delay too long to avoid worsening the situation.

Was this review help?
20
4
Share
Expand All
More Forum Discussions

What is the abbreviation for Shandong license plates?

Lu is the abbreviation for Shandong Province. The main function of a license plate number is to identify the region to which the vehicle belongs through the plate, and it can also be used to trace the vehicle's owner and registration information. Currently, the license plates for various cities in Shandong Province are as follows: 1. Lu A for Jinan City, Lu B for Qingdao City, Lu C for Zibo City. 2. Lu D for Zaozhuang City, Lu E for Dongying City, Lu F for Yantai City. 3. Lu G for Weifang City, Lu H for Jining City, Lu J for Tai'an City. 4. Lu K for Weihai City, Lu L for Rizhao City, Lu M for Binzhou City. 5. Lu N for Dezhou City, Lu P for Liaocheng City, Lu Q for Linyi City. 6. Lu R for Heze City, Lu S for Laiwu City.
4
0
Share

What to Do When the Tiida Steering Wheel Locks?

Left hand rocks the steering wheel left and right while the right hand turns the key simultaneously to unlock. The steering wheel locks because the steering wheel was turned when removing the key, triggering the car's active anti-theft security system to respond emergently, thereby locking the steering wheel. Below is relevant information about the Tiida steering wheel lock: 1. Tiida Introduction: In terms of appearance and interior, the new car is basically consistent with the old model, with the main improvements in technological configurations. The old Tiida was equipped with the advanced i-CONNECT intelligent entertainment system, and the new Tiida adds the Dongfeng Nissan "Smart Travel+" connected car system on this basis. 2. "Smart Travel+" Connected Car System: The system is equipped with iFlytek voice recognition technology. Through cooperation with AutoNavi, it updates online maps in real time. The system can achieve intelligent congestion avoidance, inertial navigation, and remote real-time monitoring functions. Users can remotely monitor the vehicle status and find the real-time location of the vehicle through a mobile APP.
2
4
Share

Is driving a pickup truck at 120 km/h on the highway considered speeding?

Driving a pickup truck at 120 km/h on the highway is considered speeding. The speed limit for pickup trucks on highways should not exceed 100 km/h; because pickup trucks fall under the category of light-duty trucks, their speed limits are calculated based on non-passenger vehicle standards, with a maximum speed not exceeding 100 km/h. Otherwise, penalties will be imposed. Below is additional information: 1. According to the "Road Traffic Safety Law," the maximum speed for small passenger vehicles on highways should not exceed 120 km/h, while other motor vehicles should not exceed 100 km/h, and motorcycles should not exceed 80 km/h. 2. Drive according to the speed limit signs on both sides of the road: Pickup trucks on the highway cannot always maintain 100 km/h; they must also adhere to the speed limit signs posted on the road. Some hazardous sections have a speed limit of 60 km/h, while certain special sections may have a limit of 80 km/h. In summary, if the current road section has a lower speed limit than the standard limit for the vehicle type, the lower speed limit must be followed to avoid speeding.
15
1
Share

Does Using the Wrong Color of Antifreeze Matter?

Using the wrong color of antifreeze can have consequences. Different colors of antifreeze may vary in chemical properties and composition. Even if the primary ingredients are the same, the secondary components and formulation ratios can differ. Mixing different types may lead to chemical reactions, causing sedimentation, scaling, and corrosion, which can negatively impact the engine's lifespan. How to choose antifreeze: The key indicators for antifreeze are its freezing and boiling points. Market-available antifreeze comes in specifications like -15°C, -25°C, -30°C, and -40°C freezing points. Generally, it's advisable to select one that is at least 10°C lower than the lowest temperature in your region. How to check if antifreeze is low: Observe the antifreeze warning light on the dashboard. If it lights up, it likely indicates low antifreeze levels, though it could also be due to excessively high cylinder temperatures. Inspect the antifreeze reservoir. If the level is below the minimum mark (MIN), do not continue driving; promptly add more antifreeze. Check the water level markings on the antifreeze tank. The normal antifreeze level should be between the maximum and minimum marks. If it's below the minimum, it means the antifreeze is low.
6
3
Share

What is the fuel tank capacity of the Mercedes-Benz C-Class in liters?

The fuel tank capacity of the Mercedes-Benz C-Class is 66 liters, which is the officially announced data. Owners who have purchased the Mercedes-Benz C-Class can also check this information on the vehicle's configuration sheet. The recommended fuel grade for the Mercedes-Benz C-Class is 95 octane, with a fuel consumption of 7.5-9L per 100 kilometers. A full tank of fuel can cover a distance of 733-880km. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. The fuel level is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow for fuel expansion when the temperature rises, preventing overflow from the tank. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
11
4
Share

Where is the air conditioning filter of QQ car?

The air conditioning filter of Chery QQ is located inside the glove box on the passenger side. The replacement steps are as follows: 1. There is a black plastic panel on the upper part of the passenger footwell with two retractable clips; remove the panel by pulling these clips. 2. Then disconnect the negative terminal of the battery, remove the body control unit, and detach the bracket holding the body control unit (two 12mm nuts). 3. Remove the panel on the left side of the passenger footwell, which is secured by four screws, and then proceed with installation. Consider replacement under the following circumstances: 1. If there is still a persistent odor or the air inside the car remains stale after cleaning, it's time to replace the air conditioning filter. 2. It's advisable to replace the air conditioning filter after driving 20,000 kilometers. If the local air environment is poor, with frequent sandstorms or smog, consider replacing it earlier, at around 10,000 kilometers. 3. Generally, the air conditioning filter should be replaced every 7,000-10,000 kilometers. If the local air quality is particularly bad, an earlier replacement is recommended. The product is designed to function effectively within these mileage limits. 4. Additionally, official products undergo strict quality and safety controls. During vehicle operation, components are subject to external forces and high temperatures.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.