What does a yellow exclamation mark on the car indicate?

1 Answers
LaLuke
07/29/25 12:11pm
The appearance of an exclamation mark on the car's dashboard indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard with exclamation marks, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system fault light, transmission fault indicator, and wiper fault indicator. Below is a detailed explanation of the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Common issues include parking sensor faults, fuel cutoff system intervention or faults, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission fluid level below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle. This represents a brake system warning, mainly indicating a fault in the brake system or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire Pressure Anomaly: A horizontal line under parentheses with an exclamation mark in the middle. This represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, indicating a fault in one of the car lights. Solution: Visit a 4S shop as soon as possible for inspection and repair, or check it yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the problem. In addition, during daily use of the vehicle, the warning lights displayed on the dashboard are divided into two different colors: yellow and red: Yellow indicates a fault in the corresponding system, but the problem is not very serious. Reduce speed and proceed to the nearest repair point to eliminate potential safety hazards. Red indicates a very serious problem in the corresponding system. In such cases, do not continue driving. Pull over immediately and seek professional help to prevent unpredictable dangers to the vehicle and personal safety. It is important to note that when the car is started, all lights will turn on for an automatic system check and will turn off after the check is completed. If a light does not turn on when the ignition is switched on, remains lit, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly for inspection and repair to eliminate safety hazards.
Was this review help?
20
5
Share
More Forum Discussions

Is it beneficial to equip a car with HUD?

Equipping a car with HUD is beneficial. HUD mainly uses projection technology to display information such as navigation on the windshield, allowing drivers to see relevant information without lowering their heads. This enables them to concentrate on observing the road ahead and surrounding vehicles, reducing visual fatigue caused by frequently switching between looking up at the distant road and down at the navigation. Consequently, it enhances driving safety, especially during nighttime and high-speed driving. The following information is displayed by HUD: 1. Current speed, which is the most basic information provided by HUD. 2. Navigation information, which is particularly effective in urban areas with heavy traffic and complex road networks. 3. OBD data fault alerts, indicating significant safety hazards during driving. 4. Driving assistance information, such as speed limit display, active lane keeping information, cruise control information, etc.
19
4
Share

What are the specifications of the Lexus LFA?

Lexus LFA specifications: 1. The Lexus LFA's engine model is 1LG-GUE, with a displacement of 4.8L, naturally aspirated intake, 10 cylinders arranged in a V-shape, cylinder bore of 88mm, stroke of 79mm, maximum power at 8700 rpm, maximum torque at 6800 rpm, and an engine compression ratio of 12:1. 2. The Lexus LFA's body dimensions are: length 4505mm, width 1895mm, height 1220mm, wheelbase 2605mm, rear track 1570mm, and minimum ground clearance 115mm. 3. The Lexus LFA accelerates from 0 to 100 km/h in 3.7 seconds, with front tire specifications of 265/35-ZR20-95Y and rear tire specifications of 305/30-ZR20-99Y.
4
4
Share

Is Hitchhiking Considered an Operating Vehicle?

Hitchhiking is not considered an operating vehicle. Below are the relevant details about hitchhiking: 1. Vehicle Type: Hello Hitch does not support all car types. The vehicle must be a model with fewer than seven seats. Seven-seater vehicles have too long a wheelbase and do not meet the registration standards for ride-hailing services. Currently, only taxis can register as Hello Hitch drivers; private cars are not eligible for registration. 2. Age: Ride-hailing services also impose certain age restrictions on drivers. Hello Hitch stipulates that male drivers must be between 23 and 60 years old, while female drivers must be between 23 and 50 years old. These age limits are set with passenger safety in mind. 3. Driver's License: Hello Hitch is a ride-hailing service, and drivers only need a license of C2 or above. However, it is important to note that the type of vehicle driven must correspond to the driver's license. For example, a C2 license holder cannot drive a manual transmission car.
8
2
Share

What does seat heating lo mean?

Seat heating lo is the abbreviation of low in English, which means low-grade heating. The following is a related introduction about seat heating: 1. Overview: Seat heating uses electric heating wires inside the seat to heat the seat interior, and transfers the heat to the occupant through heat conduction, improving the discomfort caused by the seat being too cold after being parked for a long time in winter. 2. Heater design: The basic structure of the seat heater is: the lower layer is a layer of non-woven fabric, the heating wires are arranged on the non-woven fabric, fixed with adhesive tape, the knitted fabric covers the adhesive tape, and is sewn with knitting thread into a shape similar to the seat heating area, and then sewn into the seat cover. To improve the comfort of the occupants in the car, the seat heating temperature is controlled within a certain range.
11
4
Share

Will I get points deducted for speeding over 60 km/h in a highway construction zone?

According to regulations, temporary speed limits due to construction cannot be enforced through automated speed cameras. Here are the relevant details: 1. Article 16 stipulates: The location of traffic monitoring equipment must have clear traffic signals corresponding to the regulated traffic behavior. Police should place a "speed detection warning sign" 200 meters before conducting mobile speed checks, and the speed detection range should be between 200 meters after the warning sign and the end point of the mobile speed check or the next speed check point. 2. Mobile speed detection: Mobile speed checks must be conducted by relevant law enforcement officers (traffic police), with at least two officers present during the check. Vehicle-mounted mobile speed detection must be installed on official patrol vehicles of the traffic police department. Patrol vehicles should conduct speed checks on the open roadside within the designated speed detection range, ensuring no disruption to traffic flow, and must not place speed detection devices behind bushes or other obstructions for covert speed monitoring.
19
4
Share

Are Online Turbocharger Fuel Savers Effective?

Online turbocharger fuel savers are effective. Below is an introduction to turbocharger fuel savers: 1. Electrolytic Water Oxygen-Enriched Fuel Saver: This type of fuel saver is more like a power booster. It achieves lower fuel consumption and stronger power by increasing torque through oxygen input. However, since the oxygen input is not regulated by the system, the effect can actually damage the engine. While it may improve the driving experience in the short term, the likelihood of long-term malfunctions is very high. 2. Electronic Turbo Fuel Saver: It utilizes the strong suction force of the engine's own intake to drive the disc to rotate at high speed, forming a swirling vortex during rotation. This vortex continuously draws large amounts of fresh air into the engine cylinders. As a result, the instantaneous air pressure and oxygen content in the engine increase significantly, effectively improving the air-fuel ratio. This not only enhances the engine's maximum power but also helps save fuel.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.