What does a yellow box with a cross on the roadside parking space mean?

1 Answers
MacIsabelle
07/29/25 8:39pm
It is a no-parking sign. Here is some extended information: 1. Prohibitory signs: Prohibitory signs are one of the main types of traffic signs, imposing restrictions or prohibitions on vehicles, such as no entry, no parking, no left turn, no honking, speed limits, weight limits, etc. 2. Function: It indicates that within the specified area, all vehicles are prohibited from parking temporarily or for an extended period. These signs are placed in areas where vehicle parking is prohibited. The sign features a blue background with a red circle and a red diagonal bar. Temporary stopping is not restricted. The prohibited parking times, vehicle types, and scope can be specified with auxiliary signs.
Was this review help?
7
0
Share
More Forum Discussions

The Function of Kingpin Inclination Angle

The kingpin inclination angle enables the vehicle's wheels to automatically return to the straight-ahead position after steering. The larger the angle, the stronger the self-centering effect, but the more effort is required to turn the steering wheel, and it increases tire wear. It also makes steering lighter. Below is relevant information about the kingpin inclination angle: 1. The kingpin inclination angle refers to the acute angle formed by the projection of the steering knuckle kingpin axis (or the connecting line between the upper and lower ball joint centers of an independent suspension) and the vertical line on a plane perpendicular to the vehicle's longitudinal symmetry plane. Specifically, when viewing the tire from the front or rear of the vehicle, the kingpin axis tilts inward toward the vehicle body, and this angle is called the kingpin inclination angle. When the wheel rotates around the kingpin, the lowest point of the wheel would theoretically sink below the road surface. However, in reality, the lower edge of the wheel cannot sink below the road surface. Instead, the steering wheel and the entire front of the vehicle are lifted to a corresponding height. This creates an effect where the vehicle's own gravity helps the steering wheel return to its original central position, making it easier to reset the steering wheel. 2. The kingpin inclination angle also reduces the distance between the intersection point of the kingpin axis and the road surface and the intersection line of the wheel center plane and the ground. This decreases the force the driver needs to apply to the steering wheel during turns, making steering operation lighter. It also reduces the impact force transmitted from the steering wheel to the steering system. However, the kingpin inclination angle should not be too large, as it would accelerate tire wear.
14
0
Share

How to Upgrade the Central Control Screen?

Open the resource link, download the file, and copy the downloaded file to the root directory of the USB drive. Before copying, you must empty and format the contents of the USB drive. Press and hold the MENU and NAV buttons for 5 seconds, and the central control system will pop up the system upgrade interface. Then press software upgrade and click main control upgrade.
3
3
Share

How to Fix EA888 Engine Oil Burning Issue?

Extend the two crankcase oil-gas outlet ports before and after the oil-gas separator by attaching tubes, then elevate them above the engine head and secure them at the lower left or right corner of the front windshield. Finally, wrap the tube openings with filter mesh and seal off the ports on both the turbo side and the intake manifold side.
18
3
Share

How to Connect a Phone to Crown Car Bluetooth?

Turn on the Bluetooth in your phone settings to ensure it is enabled. Enable the car's Bluetooth, then search for your phone via the car's Bluetooth and connect once found. Go to Settings > General > About > Name, tap on the car's Bluetooth name, and then proceed to pair.
15
4
Share

How to Adjust the Mixture Ratio of a Scooter Carburetor?

First, prop up the vehicle, turn the air-fuel mixture screw clockwise until it bottoms out, then back it off by 1/2 turn. Rotate the idle screw clockwise until the spring beneath the idle screw is properly compressed (preferably around 4000 rpm). Start the engine, stop rotating the air-fuel mixture screw, and let the engine continue running. Slowly turn the idle screw counterclockwise to reduce the idle speed. After completing the above adjustments, while the engine is still running, quickly open and close the throttle by hand.
3
2
Share

How to Remove the Rear Emblem?

First, use a hairdryer to heat the rear emblem of the car, then use a small knife to cut a small slit in the adhesive between the emblem and the car paint. Prepare a piece of string and a bottle of adhesive remover. Use the string to scrape off the emblem, then wipe off the 3M adhesive with the adhesive remover.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.