What does a water-crossing road surface mean?

1 Answers
DiLawson
07/30/25 6:15am
Water-crossing road surface refers to a road surface constructed across wide and shallow rivers that are usually dry or have minimal water flow, allowing water to flow over it during flood periods. Here are the relevant details: 1. Forms of water-crossing road surfaces: Water-crossing road surfaces have the advantage of being less restricted by terrain and can be set up flexibly according to local conditions. There are two main common forms: mixed-type water-crossing road surfaces and water-crossing road surfaces combined with submersible bridges. 2. Characteristics of water-crossing road surfaces: As a structural form of road surfaces, the biggest advantage of this structure is its low cost. It can solve both traffic flow and drainage issues, offering both economic and social benefits.
Was this review help?
5
5
Share
More Forum Discussions

Does turning on the air conditioning in a car in summer cause fogging on the outside or inside?

Turning on the air conditioning in a car in summer causes fogging on the outside. Precautions for using air conditioning in summer: Do not turn on the air conditioning immediately after exposure to the sun: Many cars are exposed to the scorching sun in summer, and many people tend to start the car immediately, turn on the air conditioning, and set the fan speed to high to achieve the fastest cooling effect. However, this is not a reasonable approach. After starting the car, first lower the windows on both sides to allow outside air to circulate, which can quickly reduce the temperature inside the car. Avoid using the recirculation mode for extended periods: The recirculation mode works by circulating air within the enclosed space of the car, which leads to a continuous decrease in oxygen levels inside the vehicle. Additionally, if the gasoline in the cylinders does not burn completely, unburned carbon monoxide from the engine may leak into the cabin, causing the air quality inside the car to deteriorate and potentially harm the occupants. When the vehicle is stuck in traffic in a busy urban area or facing headwinds, the recirculation mode can be used to prevent exhaust fumes from entering the car and keep the interior air clean. In other situations, it is recommended to use the fresh air mode as much as possible.
20
2
Share

What transmission oil is used for Honda 5AT?

Honda 5AT uses Honda-specific transmission oil with the model number ATFDW-1. The vehicle requires regular transmission oil changes, as expired or deteriorated transmission oil can cause difficulty in shifting and wear on transmission bearings. The purpose of adding transmission oil is to ensure smooth gear shifting, lubricate internal transmission components, and prevent damage to the transmission during gear changes. The signs that indicate the need for transmission oil replacement are: vehicle shaking, jerky gear shifting; the dashboard showing a transmission overheating warning; the car stalling; and unusual noises. The methods for replacing transmission oil are as follows: Unscrew the drain plug at the bottom of the transmission to drain the oil before refilling. Remove the transmission oil pan directly to drain and refill the oil: This method is more thorough than the previous one, as it removes impurities from the bottom of the oil pan. Use a circulation machine to replace automatic transmission oil: Dynamic oil replacement with an intelligent circulation machine can filter and clean sludge and impurities inside the automatic transmission. The hazards of not replacing transmission oil for a long time include: 1. Damage to the transmission's shift control mechanism; 2. Abnormal wear of gears and clutch plates inside the transmission; 3. Affecting the normal operation of the transmission, leading to damage to the transmission valve body.
15
4
Share

What is the maintenance interval for the Skoda Kamiq?

The maintenance interval for the Kamiq is every 5,000 kilometers. Key component maintenance: Oil change (including oil filter replacement, mineral oil every 5,000 km, semi-synthetic oil every 7,500 km, full synthetic oil every 10,000 km. Time limit: every 6 months), air filter replacement. The air filter is never cleaned, only replaced during routine maintenance every 20,000 km if not regularly cleaned, or every 40,000 km if regularly cleaned. Fuel filter replacement: every 20,000 km, air filter replacement: every 40,000 km, battery lifespan: 3 years or 50,000 km, tire lifespan: 60,000–80,000 km (3-5 years, varies by quality), wiper blades: every 2 years, brake pads: every 60,000 km (varies based on driving habits and road conditions), brake fluid replacement: every 40,000 km or 2 years, radiator coolant replacement: every 30,000 km or 1 year. Automobile maintenance: Automobile maintenance, also known as vehicle servicing, refers to the regular inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain parts as preventive measures. It primarily includes the maintenance of the engine system, transmission system, air conditioning system, etc., aiming to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, and extend the service life.
19
3
Share

Is a tire pressure of 220 acceptable in summer?

Summer tire pressure of 220 is not acceptable. According to the international GBT2978-2008 standard, the standard tire pressure should be between 2.4-2.5 bar. A pressure of 220 is below the minimum standard value, so it is not normal. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to feel heavy and increases the risk of veering, compromising driving safety; Increases the movement of various parts of the tire, causing abnormal heat due to excessive rolling; Reduces the functionality of the cord and rubber, leading to delamination or cord breakage, and excessive friction with the rim, causing damage to the bead area and abnormal wear; Multiplies the friction between the tire and the ground, causing a sharp rise in tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a blowout; Increases tire deformation, making the tire sidewalls prone to cracking and generating flexing motion, leading to excessive heat, rubber aging, fatigue in the cord layers, and cord breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear.
8
5
Share

Can a Car Be Parked Outside After Getting Window Tint in Winter?

Can a car be parked outside after getting window tint in winter? Generally, it won't affect the effectiveness of the window tint. However, if it's snowing, it's best not to park the car outside immediately after tinting, as it may cause the film to adhere poorly. If parking outside is unavoidable, you can purchase a car cover to keep the car warm at night. After getting window tint, avoid rolling down the windows for seven days. The glass becomes tighter after tinting, and opening the windows may cause the edges of the film to curl or lift, damaging the tint. After tinting, park the car in a sunny area to speed up the drying process and ensure proper evaporation of moisture, which helps maintain the tint's effectiveness. Do not wash the car for three days after tinting to prevent moisture from causing the film to peel off. It's advisable to wash the car before applying the tint. Within the first week after tinting, park the car in a sunny spot to ensure complete evaporation of moisture trapped under the film. To ensure the tint adheres firmly to the glass, avoid attaching or hanging items directly on the windows for two months after tinting. This prevents gaps from forming when removing suction cups or stickers, which could damage the film.
1
4
Share

How Often Should the Transmission Fluid of Volkswagen Lavida Be Replaced?

Volkswagen Lavida's transmission fluid should be replaced every 60,000 kilometers, with a replacement capacity of 6-10 liters. The replacement interval can be adjusted based on actual driving conditions. The primary function of transmission fluid is to keep the shifting system clean and to lubricate the transmission components, thereby extending their lifespan. If the transmission fluid is not replaced for a long time, the fluid particles may enlarge or generate debris, which can clog the oil passages and potentially lead to transmission failure. If the vehicle is driven on particularly challenging roads or exposed to harsh environmental conditions, the transmission fluid may degrade over time, necessitating regular replacement. Methods for replacing transmission fluid: Gravity Drain: Using tools to loosen the drain plug, the transmission fluid will flow out under gravity. While this method is simple, it does not completely replace all the fluid, as residual fluid may remain in low spots or dead corners of the transmission. Machine Flush: New transmission fluid is stored in a flushing machine, which is connected to the transmission's fluid passages. Under hydraulic pressure, the new fluid pushes out the old fluid, resulting in a cleaner flush. The more new fluid used, the cleaner the flush. A machine flush typically requires about 10-13 liters of transmission fluid and takes approximately one hour to complete.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.