What Does a Vehicle Stability Assist (VSA) System Malfunction Indicate?

1 Answers
LeAniyah
07/29/25 3:27pm
Vehicle Stability Assist (VSA) system malfunction indicates a system failure, with specific details as follows: 1. VSA: It is a world-class control system that enhances vehicle stability and driving safety. In addition to traditional anti-lock braking and traction control functions, the VSA system also incorporates anti-skid control. 2. Automobile engine malfunction: After diagnosis with a diagnostic computer, the device will display fault codes. Using these codes, maintenance personnel can accurately identify the faulty component and proceed with repairs.
Was this review help?
2
2
Share
More Forum Discussions

Is the Volkswagen Magotan's Transmission Dry or Wet?

The Magotan's 7-speed dual-clutch transmission is dry. The inherent efficiency of dry clutches in transmitting torque significantly improves fuel economy. Below is a detailed explanation of dry and wet clutches: 1. Wet Dual-Clutch: This refers to a dual-clutch system consisting of two sets of multi-plate clutches, one large and one small, mounted coaxially. Both are housed in a sealed oil chamber filled with hydraulic fluid. Thus, the wet clutch structure offers better adjustability and superior thermal tolerance, enabling it to transmit higher torque. 2. Dry Dual-Clutch: This system transmits power through multiple metal friction plates. The tighter these plates are pressed together, the higher the transmission ratio. If the plates separate, the transmission is interrupted. Because this type of dual-clutch transmits power through direct metal-to-metal contact, it responds faster than wet clutches. However, the metal friction plates cannot withstand excessive torque, as this can easily damage them. Therefore, dry dual-clutch transmissions are mostly used in small-displacement vehicles.
16
1
Share

What are the differences between the Audi A3 Fashion Edition and Progress Edition?

Audi A3 Progress Edition and Fashion Edition differ only in some configurations, with no differences in other aspects. The Audi A3 comes in a two-door Sportback version and a four-door Limousine version. The following are the specific differences: 1. For the two-door version, the Fashion Edition has front parking radar, an electric sunroof, a sport appearance package, leather-fabric mix seats, four-way height adjustment for the driver's seat, and lumbar support, which the Progress Edition lacks. The Fashion Edition uses LED light sources for both high and low beams, while the Progress Edition uses xenon light sources. The Fashion Edition also has headlight washers, which the Progress Edition does not. 2. The four-door version is similar. The Fashion Edition has front parking radar, an electric sunroof, a sport appearance package, leather-fabric mix seats, four-way height adjustment for the driver's seat, and lumbar support adjustment, which the Progress Edition lacks. The Fashion Edition uses LED light sources for both high and low beams, while the Progress Edition uses xenon light sources. The Fashion Edition has headlight washers, while the Progress Edition does not.
13
1
Share

What engine is used in the GAC Honda Vezel?

GAC Honda Vezel is equipped with Honda's Earth Dreams series engine. This engine has a displacement of 1.5L. Below is a detailed introduction to the Honda Vezel: 1. The 1.5L gasoline engine adopts a direct injection system, and the small CVT it is paired with delivers responsive direct acceleration for a fun driving experience. Within compact limits, it achieves far superior environmental performance compared to previous Honda models. 2. The 1.5L engine, codenamed L15B2, has already been applied in the new Fit. With maximum power and torque of 96kw/6600rpm and 155N·m/4600rpm respectively, the power performance is excellent for such a small SUV.
16
1
Share

What to Do When a BMW Tire Loses Pressure?

Solution for BMW tire pressure loss: Simply reduce speed and drive normally to a 4S shop for tire pressure inspection, then replenish the tire pressure to the normal range. Below is an introduction about car tire pressure: 1. The standard tire pressure for vehicles is between 2.4-2.5bar. Some cars come with factory-installed tire pressure monitoring systems, and owners without one can also have it installed. 2. Common types of tire pressure monitoring include direct and indirect tire pressure monitoring. 3. Direct tire pressure monitoring: Uses pressure sensors installed in each tire to directly measure the tire pressure, transmitting the pressure information from inside the tire to a central receiver module via a wireless transmitter, then displaying the tire pressure data for each tire. The system automatically alerts when the tire pressure is too low or there is a leak. 3. Indirect tire pressure monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to other wheels. By comparing the differences in rotation speeds among the tires, the purpose of monitoring tire pressure is achieved.
13
4
Share

What to do if the gl8 key is often not detected?

gl8 not detecting the key may be due to poor battery contact in the key. Remove the battery and reinstall it. If it still cannot be detected, the battery may be dead and needs to be replaced with a new one. If the key is still not detected after replacing the battery, use the mechanical key to start the car and then visit a 4S store to inquire about the issue. Below is the working principle of the remote key: 1. The remote key is controlled via radio signals. The remote key has a receiver that detects 125kHz wireless coded signals, which are emitted by the comfort access system antenna. This radio signal is used to identify whether the transmitter is around the vehicle and to activate the identification transmitter. The remote key also has a transmitter that can emit high-frequency coded signals to verify that the remote key is valid and belongs to the vehicle, thereby executing commands such as unlocking the door or starting the car. 2. There may also be other reasons for the key not being detected, such as electromagnetic interference nearby, signal interference sources, etc. Some dash cams, if not properly shielded electromagnetically, can also cause interference.
18
0
Share

Where to Add Windshield Washer Fluid for Baojun 510?

Open the engine hood, and in the lower right corner of the engine compartment, you will find a white cap. This is where you add the windshield washer fluid. Simply open the white cap and pour in the fluid. The maximum capacity is approximately 1.5 liters. Windshield washer fluids are mainly divided into three types: 1. Summer-specific. This type of windshield washer fluid includes insect-removing agents in its base formula, which helps quickly remove insect residue from the windshield. 2. Standard winter windshield washer fluid. Also known as anti-freeze windshield washer fluid. This type generally ensures that the fluid will not freeze and damage car components even when the outside temperature drops below -20°C. 3. Special anti-freeze windshield washer fluid. This type can remain unfrozen at temperatures as low as -40°C, making it suitable for use in extremely cold regions of northern China.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.