What does a triangle with an exclamation mark mean?

2 Answers
VanSerenity
07/23/25 8:30pm
A triangle with an exclamation mark indicates a malfunction in the vehicle's regular performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: It is necessary to visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault indicator in vehicles. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark indicators: a yellow gear with an exclamation mark, a red circle with parentheses and an exclamation mark in the middle, a yellow parentheses with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic Transmission Fault: A yellow gear with an exclamation mark is the automatic transmission fault warning light, indicating a fault in the transmission or transmission fluid level below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Tire Pressure Anomaly: A parentheses with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the vehicle's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in the vehicle's lights. Solution: Visit a 4S shop for inspection and repair as soon as possible. Alternatively, you can perform a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights, to identify the issue.
Was this review help?
6
4
Share
LaVivian
08/10/25 6:28pm
That triangle with an exclamation mark light on the dashboard is lit up, and as an experienced driver of many years, it makes me feel uneasy. This usually indicates an issue with the vehicle's stability control, such as low tire pressure or a sensor false alarm. Once it lights up, you should slow down immediately. I've encountered this in rain or snow before—the system limits braking to prevent skidding, but if it stays on constantly, there might be a serious hidden risk. It's best to first check the tire pressure yourself or visit a professional shop for diagnosis—don't delay until it becomes a major issue. Regular maintenance of the wheels and brake system can reduce such troubles. Safety always comes first.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

What engine does the Arrizo 5 have?

Arrizo 5 is equipped with a 1.5L naturally aspirated engine with the model code SQRE4G15C, which can deliver a maximum output of 116 horsepower and 143N·m of torque. Here is some extended information about the engine: 1. An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, electric motors, etc. 2. The engine block is the framework that constitutes the engine and serves as the installation base for various mechanisms and systems of the engine. It houses all the main components and accessories of the engine and withstands various loads. Therefore, the engine block must have sufficient strength and rigidity. The engine block group mainly consists of components such as the cylinder block, cylinder liner, cylinder head, and cylinder gasket.
2
0
Share

What does it mean when the oil can light comes on in a car?

There are two situations that may cause the oil can light on the vehicle dashboard to illuminate: 1. The first is when the oil can light on the vehicle dashboard appears yellow. If the oil can light on the dashboard is yellow, it indicates that the engine oil level in the vehicle is too low, but you can still drive for a short distance. In this case, it is essential to add engine oil to the vehicle promptly. 2. The second situation is when the oil can light on the vehicle dashboard appears red. If the oil can light on the dashboard is red, it means the engine oil level in the vehicle is critically low. Continuing to drive under these conditions can cause damage to the vehicle. Therefore, when the oil can light on the dashboard turns red, you must stop the vehicle immediately, call for assistance, and wait quietly for help to arrive.
20
2
Share

How to Drive an Automatic Transmission Car on an Uphill Road?

Automatic transmission car uphill starting steps are as follows: 1. Pay attention to the tachometer on the dashboard. When starting a cold engine, the engine speed is usually above 1000 rpm. Wait for about 10 seconds until the speed drops below 1000 rpm. When the speed drops below 1000 rpm, press the brake with your right foot and release the handbrake with your right hand. 2. Shift the gear from P (Park) to D (Drive). P is the parking gear, and D is the drive gear. (Note that the right foot is still pressing the brake at this time) 3. In the case of a steep slope, quickly release the brake and quickly apply the throttle, with a slightly larger throttle. Of course, also make sure there are no obstacles ahead to prevent rear-end collisions.
12
3
Share

How to Check if a Car's Air Conditioning is Leaking Refrigerant?

Methods to determine if a car's air conditioning is leaking are as follows: 1. Observe whether there are oil stains on the air conditioning pipes and various interfaces; 2. Spray soapy water and check for bubbles; if bubbles appear, it indicates a leak. The functions of the air conditioning system are as follows: 1. Achieve cooling effect through the continuous phase change cycle of the refrigerant; 2. Remove dust, odors, smoke, and toxic gases from the car's interior air, making the air fresher, and humidify the interior air to increase its relative humidity; 3. Utilize the engine coolant, waste heat, or heat generated by a burner as a heat source for heating. The heater then warms the air, which is blown into the car's interior or from outside by a blower, raising the temperature at the air vents to achieve heating purposes.
15
2
Share

What are the length, width, and height of the Geely Boyue?

The length, width, and height dimensions of the Boyue are 4544mm/1831mm/1713mm, which are official data. The length of the Boyue refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and respectively touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and respectively touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The Boyue's turbocharged engine has a maximum power of 135kW and a maximum torque of 350 Nm. This engine reaches its maximum power at 5500 rpm and its maximum torque between 1750-4000 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head with a cast iron cylinder block. This engine is paired with a wet dual-clutch transmission (DCT). The state has relevant regulations regarding vehicle dimensions. According to the national standard 'GB1589-89,' the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
1
4
Share

How to Replace the Air Filter in a Superb?

Steps to replace the air filter in a Superb: 1. Open the engine hood and locate the air filter housing. 2. Gently release the two clips securing the housing cover, then lift the entire air filter housing cover. 3. Remove the old air filter from the housing. 4. Install the new air filter, replace the housing cover, and secure the clips. Below is relevant information about air filters: 1. An air filter, also known as an air filter cartridge or air cleaner, is primarily used for air filtration in engineering vehicles, automobiles, agricultural vehicles, laboratories, sterile operating rooms, and various precision operation rooms. 2. During operation, the engine inhales a large amount of air. If the air is not filtered, dust suspended in the air entering the cylinder can accelerate the wear of the piston group and cylinder. 3. Based on filtration principles, air filters can be categorized into filtration type, centrifugal type, oil bath type, and composite type.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.