What does a triangle exclamation mark on the car dashboard mean?

Can You Still Drive If the Steering Wheel Loses Power Assistance?

It is not advisable to drive when the steering wheel power assistance fails; it is recommended to slow down and stop promptly for comprehensive maintenance and inspection. The function of the automotive steering system is to control the vehicle's direction according to the driver's intention, making it crucial for driving safety. Therefore, components of the steering system are referred to as safety-critical parts. Below is additional information: Steering wheel power assistance: Power steering assists the driver in reducing the effort required to turn the steering wheel, and it also plays a role in the safety and fuel efficiency of the vehicle. When turning, the torque sensor detects the steering wheel's torque and intended direction. These signals are sent to the electronic control unit via the data bus, which then issues commands to the motor controller based on the torque and intended direction. The motor then outputs the corresponding amount of torque as needed, generating power steering assistance.

1

4

Share

What does engine cylinder head gasket failure mean?

The so-called engine cylinder head gasket failure refers to a malfunction where the engine's cylinder head gasket becomes burnt or damaged, resulting in poor sealing of the engine cylinders and combustion chambers. This issue has different names in various regions. Here, it is commonly referred to as "cylinder gasket blowout," while in other places, it might be called "cylinder head gasket failure" or "gasket blowout." Regardless of the term, it all refers to the same problem, which is a piece of industry jargon. Below is additional information: Engine combustion chamber: The engine combustion chamber is formed jointly by the cylinder head and the cylinder block. The sealing between these two components is achieved by the cylinder head gasket. It is one of the most critical gaskets in a vehicle, effectively preventing gas, water, and oil leaks between the cylinder block and cylinder head. Given that the engine combustion chamber operates under high-temperature and high-pressure conditions, the cylinder head gasket must be heat-resistant, corrosion-resistant, and possess sufficient strength, elasticity, and thermal conductivity to ensure reliable sealing of the cylinder head.

19

2

Share

Why does the engine malfunction indicator light come on every few days?

The engine malfunction indicator light coming on every few days suggests it may be an intermittent fault, possibly due to poor sensor contact or an intermittent issue. It is recommended to use an automotive diagnostic scanner to check the engine system. In many cases, the cause is substandard fuel quality, which affects the incomplete combustion of the engine's air-fuel mixture. Below is an introduction to issues with the car's warning lights: 1. The engine malfunction indicator light comes on and then goes off: In many cases, this is due to substandard fuel quality affecting the incomplete combustion of the engine's air-fuel mixture. You can add some high-quality fuel additives or choose a gas station with better fuel quality. 2. The exhaust emission warning light stays on continuously: A diagnostic tool is needed to identify the fault codes stored in the engine. Based on the fault codes and the data status of the engine's oxygen sensors and other systems, further troubleshooting can be conducted. This is because any issues with components related to the air-fuel mixture combustion in the engine can generally trigger the exhaust emission warning light.

11

5

Share

Which BMW engine is used in the Brilliance Zhonghua V7?

Brilliance Zhonghua V7 is equipped with a BMW engine, specifically the CE16 1.6T engine. It delivers a maximum horsepower of 204ps, a maximum power output of 150kw, and a maximum torque of 280nm. The engine used in the Brilliance Zhonghua V7 is the CE16 produced by Mianyang Xinchen Power. This engine incorporates BMW Prince engine technology, offering excellent performance. For daily maintenance of the Brilliance Zhonghua V7 engine, the following methods can be employed: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine issues. To prevent faults, change the oil regularly based on usage conditions and maintain an appropriate oil level. As oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication points, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates properly but also extends the overall lifespan of the radiator and engine.

9

1

Share

Is it normal to consume a full reservoir of coolant in three months?

It is normal to consume a full reservoir of coolant in three months, but timely replenishment is required. Introduction to Coolant: Coolant is a special additive-containing cooling fluid with a higher boiling point and lower freezing point than water, primarily used in liquid-cooled engine cooling systems. Reasons for rapid coolant consumption: Radiator damage or leakage, requiring repair or replacement; loose or damaged radiator hose connections, necessitating tightening of clamps or hose replacement; damaged radiator cap, requiring replacement; water pump leakage, requiring replacement; loose drain valve, needing tightening or replacement; EGR cooler malfunction, requiring repair or part replacement; damaged cylinder head gasket, requiring repair or replacement; cracks in the cylinder head or block, requiring replacement of related parts. Functions of Coolant: In winter, coolant effectively protects the car's cooling system from freezing at low temperatures, preventing malfunctions and ensuring normal operation. In summer, it significantly reduces engine overheating risks such as cylinder scoring or boiling, providing cooling and heat dissipation. The car's internal metal components, especially the engine system, are prone to rust and corrosion when in contact with water. Coolant contains anti-corrosion and rust-preventing additives. Scale buildup can impair the car's heat dissipation and is difficult to remove. Coolant includes descaling agents to prevent scale formation.

19

1

Share

Does the Envision have a heated rearview mirror function?

The Envision is equipped with a heated rearview mirror function. The switch for the heated rearview mirror is located in the air conditioning control area on the center console panel. Above the AC button is the heated rearview mirror button, which is marked with a rectangle and three wavy lines. The heated rearview mirror button and the rear window defogging button are the same. The heated rearview mirror function is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the mirror surface, gradually removing rainwater or fog, eliminating the need for the driver to manually wipe the mirror frequently, thereby reducing driving hazards. How to use the heated rearview mirror function: There are generally two ways to activate the heated rearview mirror function. One is combined with the electric rearview mirror adjustment function button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is needed; the driver's side has an adjustment button. Principle of the heated rearview mirror function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within a few minutes, typically between 35-60 degrees. The heat will dissipate from the left and right rearview mirrors. Simultaneously, as the temperature rises and evaporation occurs, water droplets on the mirror surface become smaller, and fog gradually disappears, thus heating the mirror and removing frost. If the rain is particularly heavy, its effectiveness may decrease and become less noticeable. Precautions for using the heated rearview mirror function: The principle of the heated rearview mirror involves adding electric heating wires to the mirror. These wires consume a significant amount of power. When using the heated rearview mirror function, ensure the car is in an operational state. Avoid activating the function while the car is stationary to prevent draining the car battery, which could lead to insufficient power for starting the vehicle. Other methods for defogging the rearview mirror include: Opening windows for convection: Crack open the side windows slightly to allow air convection between the inside and outside of the car, reducing the temperature difference and causing the fog to disappear gradually. Adjusting the car's air conditioning to the appropriate setting can also help defog the mirrors by blowing warm air.

20

4

Share

What does a triangle exclamation mark on the car dashboard mean?

Can You Still Drive If the Steering Wheel Loses Power Assistance?

What does engine cylinder head gasket failure mean?

Why does the engine malfunction indicator light come on every few days?

Which BMW engine is used in the Brilliance Zhonghua V7?

Is it normal to consume a full reservoir of coolant in three months?

Does the Envision have a heated rearview mirror function?

What are the reasons for the sluggish and weak acceleration of the Golf 6 engine?

What Causes the Engine Compartment to Make Noise After the Engine is Turned Off?

Does modifying the intake system improve power?

What type of oil should be used for the 2016 Boyue?