What Does a Traffic Violation Warning Mean?

How to Use the New Qashqai's Windshield Wipers?

The method to use the windshield wipers on the new Qashqai is as follows: 1. Pull the lever toward the driver to spray windshield washer fluid onto the windshield; 2. The middle position is the intermittent mode, which wipes at a certain frequency; 3. After pushing the wiper control lever downward, the wiper's operating frequency increases; 4. When the switch is turned to the OFF position, the wipers are turned off; 5. Pulling the lever upward once will cause the wipers to wipe once. Windshield wipers refer to the blade structure installed in front of the windshield, composed of an electric motor, reducer, four-bar linkage, wiper arm spindle, wiper blade assembly, etc. Their main function is to clear rain, snow, and dust that obstruct the view on the windshield. The new Qashqai is an SUV model from Nissan Motor Group. The vehicle's engine features direct injection technology and uses an aluminum alloy cylinder head and block, paired with a CVT transmission. Its body dimensions are 4401mm in length, 1837mm in width, and 1593mm in height, with a wheelbase of 2646mm.

11

1

Share

How to Determine the Amount of Engine Oil in a Car?

Methods to check the amount of engine oil in a car: observe the position of the oil level, which should normally be between the upper and lower marks on the dipstick; use the dipstick by pulling it out, wiping it clean with a tissue, reinserting it fully, and then pulling it out again to observe the oil level. Open the hood. Most cars have an internal button under the steering column to release the hood. Press the button, then go to the front of the car to lift the hood. Raise it fully and use the metal support rod if available to prop it open. Pull out the dipstick and wipe it clean with a cloth. The dipstick is inserted into the engine's oil tank and is used to measure the remaining oil level. Engine oil, also known as motor lubricant, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and act as a shock absorber. It is often referred to as the "blood" of the car, ensuring the engine does not overheat. If you touch engine parts immediately after turning off the engine, you risk burning yourself. Wait at least 10 minutes or plan to check the oil when the engine is cold.

15

2

Share

Can I rent a car during the probationary period of my driver's license?

You can rent a car from a rental company as long as you have a driver's license. However, you cannot rent vehicle models that do not comply with the regulations of your driver's license, except for the test drive models. Additionally, you are not allowed to drive on highways during the probationary period unless accompanied by a person with more than three years of driving experience in the passenger seat. Legal basis: Article 74 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" stipulates that the first 12 months after a motor vehicle driver initially applies for a driver's license or adds a permitted driving model is the probationary period. Those who newly obtain a driver's license for large buses, tractors, city buses, medium-sized buses, or large trucks must, within 30 days after the end of the probationary period, take a knowledge test on road traffic safety laws and regulations, safe and civilized driving, emergency handling, etc., and receive no less than half an hour of traffic accident case warning education. During the probationary period, when driving a motor vehicle, a uniform-style probationary sign must be affixed or hung at the rear of the vehicle.

3

2

Share

Where is the radiator shutter switch for the Ford Focus?

The Ford Focus does not have a radiator shutter switch; it uses a water temperature sensor signal for control. When the car is first started and the engine coolant temperature is low, the radiator shutter will automatically close. The car radiator, generally referred to as the car's cooling system, consists of three parts in the engine water cooling system: the inlet chamber, outlet chamber, main plate, and radiator core. Below are the steps for adding water to the car radiator: 1. Turn the pressure cap counterclockwise. If you hear a hissing sound, wait until the sound stops before opening it. 2. Add an appropriate amount of coolant to the coolant expansion tank, ensuring the level is between the MAX and MIN marks. 3. With the coolant expansion tank cap open, start the engine. 4. After starting the engine, the coolant level in the tank will gradually decrease. At this point, add more coolant to the expansion tank until the level reaches between the MAX and MIN marks again. 5. Reinstall the cap, ensuring it is hand-tightened and fully seated.

8

4

Share

Is the Volvo S60 domestically produced?

Volvo S60 is a domestically produced car. The Volvo S60 has been localized for production in China. The domestically produced Volvo S60 pure gasoline version is equipped with a T5 engine, paired with an 8AT transmission. Additionally, plug-in hybrid versions will also be domestically produced in the later stages. Relevant information about the Volvo S60 is as follows: 1. Exterior: The front face design of the S60 is novel and unique, with smooth lines, giving a visual impression similar to a hatchback model; the overall shape is stylish and stable, without losing its grandeur; the rear design lacks innovation. 2. Interior: The interior carries Volvo's unique elegance and simplicity, with a strong sense of luxury and is very beautiful; it features fine craftsmanship and rich configurations, with firm and comfortable leather seats; the center console layout is reasonable, and the button arrangement is convenient for operation. 3. Handling: The overall handling of the Volvo S60 is flexible, with smooth gear shifting; the steering wheel feels good, with clear direction; the suspension tuning is well-done, and the chassis has good passability; the engine noise is relatively small, with an open driving view and clear road feel; when cornering at high speed, the sense of roll is small.

9

2

Share

What is the insurance claim method for a damaged car?

The insurance claim method for a damaged car is as follows: 1. Report the incident: After the accident, preserve the accident scene and immediately call the insurance company to report the incident. 2. On-site handling: For minor damages, the insurance company will send someone to inspect the scene and issue an "Inspection Report"; for major damages, if the inspector deems it necessary to involve the traffic police, they will report to the traffic police department, who will then conduct an on-site investigation and evidence collection, and issue an "Accident Determination Certificate". 3. Damage assessment and repair: The car owner sends the vehicle to the damage assessment center and notifies the insurance company simultaneously for assessment; the repair shop fixes the car; the car owner picks up the car.

14

4

Share

What Does a Traffic Violation Warning Mean?

How to Use the New Qashqai's Windshield Wipers?

How to Determine the Amount of Engine Oil in a Car?

Can I rent a car during the probationary period of my driver's license?

Where is the radiator shutter switch for the Ford Focus?

Is the Volvo S60 domestically produced?

What is the insurance claim method for a damaged car?

What is the fuel consumption of the Jimny?

Why Do We Need to Take Photos On-Site for Driver's License Medical Exam Even If We Bring Our Own Photos?

How to Turn on the High Beam of Honda Civic?

How to Turn On the Buick Envision Headlights?