What does a TC with a slash on the dashboard mean?

2 Answers
MacAdriel
07/29/25 8:37am
The appearance of a TC icon with a slash on the dashboard indicates that the traction control system is turned off. The illuminated light does not signify a fault in the car; it is merely a reminder icon, so there is no need to worry. Once the system is turned back on, the slash will disappear. Below is relevant information about the car's traction control system: 1. Cars equipped with a traction control system will, during driving, activate the ABS anti-lock braking system when it detects wheel slippage. The system will then apply braking to the slipping wheel to prevent loss of traction, thereby improving the vehicle's passability. 2. When the system is active, a yellow TC indicator light on the dashboard will flash to alert the driver. 3. The traction control system in a car is highly important, second only to seat belts in significance. It reduces the occurrence of wheel spin and ensures the car maintains good stability during driving. 4. The traction control system automatically activates when the car starts. If the wheels show any signs of slipping, the system will intervene immediately.
Was this review help?
18
3
Share
LaKiara
08/12/25 6:06am
When I see that TC with a slash indicator on the dashboard, it means the traction control system has been manually turned off. This thing is actually a safety feature that normally helps tires grip the ground and prevent slipping in rainy or snowy conditions. Having driven for over a decade, I occasionally turn it off when starting off-road or on muddy roads, allowing the wheels to spin more freely for easier escape. But during daily driving with it on, you hardly notice it—when the light comes on, it means you've lost that protection, making high-speed cornering or sudden acceleration more prone to skidding. If the light stays on for no reason and you haven't touched the switch, the button might be stuck or a sensor could be faulty. Try restarting the vehicle; if the issue persists, head to a repair shop to check the wiring. Don't underestimate it—safety is far more important. My advice: unless necessary, better leave it on.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

What is the method for resetting a car's ECU by disconnecting the power?

Car ECU power disconnection reset method is: 1. Disconnect the positive terminal of the car battery, at which point the vehicle will lose power; 2. After 5 to 10 minutes of power disconnection, the information in the ECU will be reset. The ECU is referred to as the brain of the engine, with many sensors and actuators around the engine. The ECU can collect data from various sensors, process it, and then control the engine's operation through the actuators. The ECU is a computer board, fixed within the engine compartment, and can be found after opening the engine hood. The ECU's casing is metal with certain waterproof capabilities, and there are some heat sinks on this metal casing to help dissipate heat from the ECU.
14
1
Share

What is the function of a rearview blind spot mirror?

Introduction to the function of a rearview blind spot mirror: 1. Reduce blind spots. During daily driving, due to the presence of certain blind spots in the driver's line of sight, it is often difficult to notice some overtaking situations, leading to unnecessary accidents. Installing a small convex mirror on the rearview mirror can eliminate the blind spot on the right rear side of the vehicle. 2. Make reversing more convenient. During daily driving, drivers usually cannot see the condition of the side of the vehicle body and the rear wheels. With the installation of a small convex mirror, the driver's viewing angle is expanded, making it easier to see the position of the rear wheels when reversing. For beginners, parking becomes much simpler. 3. Prevent scratches. A wider field of vision naturally allows the driver to see more objects, thus avoiding incidents where the vehicle body gets scratched.
19
4
Share

What are the reasons for no response when starting an old Mazda 6?

No response when starting can be caused by various issues, mostly related to the fuel system or electrical circuit. First, check if there is insufficient fuel. Without the power source "gasoline," the car naturally won't start. If the issue is due to lack of fuel, depending on the situation, you can seek help from nearby car owners, borrow fuel, or arrange for towing to a gas station as emergency measures. Below are other reasons why a car might not start. 1. Incorrect gear selection can also prevent the car from starting. Normally, the correct gears for starting an automatic transmission car are P (Park) or N (Neutral). If the driver accidentally leaves the gear in R (Reverse) or another position, not only will the car fail to start, but it may also pose a safety hazard. 2. If the issue is electrical, the failure to start can occur suddenly. Common electrical faults that prevent starting include: blown fuses, open circuits in the high-voltage coil, open circuits in the low-voltage circuit, detached central ignition wire, leaking distributor rotor, or damaged spark plugs.
19
0
Share

Reasons for Frequent Coolant Loss in the Expansion Tank Without Overheating

The reasons for frequent coolant loss in the expansion tank without overheating are: 1. There is a leak in the cooling system; 2. The coolant temperature may be too high; 3. The water pump is seized; 4. The cylinder head gasket is blown. The functions of the radiator are: 1. To improve the cooling efficiency of the coolant; 2. To prevent the engine from overheating. Precautions when using the radiator: 1. Prevent the car radiator from overheating; 2. Replace the coolant regularly; 3. Do not use tap water as a substitute for coolant; 4. Choose high-quality diluted water when selecting radiator fluid or antifreeze; 5. Perform regular anti-rust treatment for the radiator; 6. Address radiator issues promptly to avoid further damage from continued use.
3
2
Share

Is the first oil change free?

First maintenance is free. The time limit for the first maintenance: When the new car reaches the first maintenance mileage specified in the "Maintenance Manual" provided with the vehicle, usually at 2000 kilometers, the first maintenance must be performed. Moreover, the first maintenance must be carried out at an authorized service station, where the service station will perform the first maintenance for the customer free of charge. This is also one of the necessary conditions for the user to obtain the quality guarantee. The following points should be noted in terms of vehicle maintenance: 1. Replace the three filters and engine oil; 2. Check whether the brake fluid, transmission oil, and power steering fluid should be replaced; 3. Inspect the brake pads, tires, shock absorbers, and suspension; 4. Check the spark plugs, throttle valve, and fuel supply system; 5. Rotate the front and rear wheels and perform routine inspections (lights, battery, etc.).
2
3
Share

Does the Accord 260 Elite Edition have CarPlay?

The Accord 260 Elite Edition is equipped with CarPlay. Taking the 2021 tenth-generation Accord as an example, it is a mid-size car with body dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, a wheelbase of 2830mm, a minimum ground clearance of 150mm, and a curb weight of 1495kg. The 2021 tenth-generation Accord features a MacPherson strut front suspension and a multi-link independent rear suspension. It is powered by a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 194PS, a maximum torque of 260Nm, and a maximum power output of 143kW, paired with a continuously variable transmission (CVT).
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.