What does a small shoe icon on the dashboard mean?

3 Answers
OKingston
07/25/25 4:35am
A foot icon appearing on the dashboard indicates that you need to press the brake pedal to shift gears. This safety feature is designed to protect drivers. Without this function, drivers could shift gears freely without pressing the brake, which might lead to dangerous situations where the vehicle moves forward or backward while changing gears. Here is some relevant information about car dashboards: 1. Introduction: The dashboard (instrument-panel) is a rigid plate or structural component used for mounting instruments and related devices. It can be categorized into screen-type, frame-type, passage-type, and cabinet-type dashboards based on their design. 2. Function: Dashboards can come with external lighting and may include a control panel. They are available in various forms and specifications, allowing for the installation of different instruments as needed or combining multiple dashboards into a single unit.
Was this review help?
1
4
Share
LeManuel
08/10/25 5:27pm
I've been driving for half my life and this happens all the time. When that little shoe icon lights up on the dashboard, it's either your parking brake isn't released or there's a problem with the entire braking system. Let me tell you, you can't be careless about this—find a safe spot to pull over immediately. First, check if the handbrake by the door is fully released. If the light goes off, you just forgot to release it—be more careful next time you start the car. But if the light stays on, that's serious trouble—it could mean low brake fluid, a faulty ABS sensor, or worn-out brake pads. Driving like this not only costs you a fortune in repairs but could also lead to brake failure and a crash. I've seen a neighbor's car totaled this way. A repair shop can scan the code with their equipment to pinpoint the issue. Remember to check your brake fluid level every six months—don't cut corners when it comes to safety. After all, safety comes first when you're on the road.
Was this review help?
15
4
Share
Expand All
VonBeau
08/10/25 5:28pm
Yo, my car had that little shoe light on last time too, freaked me out. That's reminding you to release the foot brake after parking, or there might be a brake issue. Don't rush to drive, first pull over and feel the handbrake lever with your hand—if it's pulled tight, gently release it to reset, chances are the light will go off. If it doesn't, then consider a brake system malfunction, like a sensor going crazy or a short circuit. Once I drove off without releasing the brake, the car sounded like a tractor, and after a few kilometers, I could smell burning—the brake discs were glowing red, cost me thousands to fix. I've made it a habit to glance at the dashboard before starting, saves a lot of hassle. Suggest you check the owner's manual to confirm the symbol's meaning, slight differences between car models, prevention is better than cure.
Was this review help?
10
5
Share
Expand All
More Forum Discussions

Can very small dents on a car be repaired?

Very small dents on a car can be repaired. Methods for repairing small dents: The most traditional treatment method is sheet metal repair, which can be used for both large and small dents. Although sheet metal repair is relatively expensive, it provides the best results. Car owners can also purchase a car dent repair kit to attempt the repair themselves. However, sheet metal work generally cannot be completed by car owners on their own and requires a visit to an auto repair shop. Methods for repairing bumper dents: If the dent is on the bumper, you can pour hot water over it to utilize thermal expansion and contraction to restore its elastic deformation. Most bumper materials are relatively soft, and the plastic has good elasticity. The operation is relatively simple—just prepare a pot of boiling water in advance, pour it over the impacted area, wait for it to heat up, and then press the dented area back into place by hand.
3
2
Share

How many points are deducted for reversing at highway exits?

Reversing at highway exits results in a 12-point deduction and a fine. Points deduction summary: For bus and truck drivers, in addition to the fine and 12-point deduction, their driver's license will be downgraded. If it is a commercial vehicle, the traffic police department will also report to the passenger transport unit, leading to internal penalties from the unit. Relevant regulations: Article 24 of the Road Traffic Safety Law states that the public security traffic management authorities shall implement a cumulative demerit point system for motor vehicle drivers who violate road traffic safety laws and regulations, in addition to imposing administrative penalties according to the law. The public security traffic management authorities shall detain the motor vehicle driver's license of those who accumulate demerit points up to the prescribed value, provide them with education on road traffic safety laws and regulations, and require them to retake the test; if they pass the test, their motor vehicle driver's license will be returned. For motor vehicle drivers who comply with road traffic safety laws and regulations and do not accumulate demerit points within one year, the validity period of their motor vehicle driver's license may be extended. The specific measures shall be stipulated by the public security department of the State Council.
6
0
Share

What does 60v mean?

60v refers to the battery voltage. Relevant introduction about electric vehicle batteries: Optimal battery temperature: The suitable temperature range for battery cells is 0-40 degrees Celsius. Temperatures that are too high or too low can affect the activity of the battery cells, cause irreversible damage, and even shorten the battery lifespan. When charging an electric vehicle, if the battery temperature is below 0 degrees Celsius, it is necessary to preheat the battery before charging, which will also prolong the charging process and is not conducive to battery maintenance. Precautions for battery use: During vehicle charging, the temperature of the battery pack rises. If the temperature difference is too large, it can cause chemical reactions in the active materials on the positive and negative plates, thereby shortening the battery life. Conversely, when the battery temperature is too low, the battery's storage capacity decreases, making it prone to over-discharge, which in turn shortens the battery life.
15
0
Share

How Much More Fuel Can Be Added After the Pump Nozzle Clicks Off?

After the fuel tank is filled to the point where the pump nozzle clicks off, approximately 3-6 liters of fuel can still be added, though this capacity varies by vehicle model. The 'click-off' refers to the automatic stopping action of the fuel pump nozzle when the car's tank is nearly full. This occurs because the nozzle contains a hidden trigger mechanism; once the fuel reaches the nozzle's tip, the automatic shut-off device activates, stopping the fuel flow. Clicking off doesn't mean the tank is completely full, as the upper part of the tank reserves space for fuel vapor to prevent excessive internal pressure. The 'click-off' action doesn't affect the fuel amount, but drivers should note two things: first, check if the fuel pump display has reset to zero before refueling; second, qualified fuel pumps are labeled with a 'Mandatory Inspection Passed' tag, while unqualified ones are marked with an 'Out of Service' tag. Reasons why the actual refueling amount can exceed the tank's nominal capacity: The 'Safety Performance Requirements and Test Methods for Automotive Fuel Tanks' stipulate that the nominal capacity of a fuel tank should be 95% of its maximum liquid capacity. Since fuel is highly volatile and its volume changes significantly with temperature, tanks reserve some safety space to accommodate fuel expansion. Market vehicle tanks typically have a nominal capacity of only 88%-90% of their maximum volume, so it's possible for the actual refueling amount to exceed the nominal capacity.
6
4
Share

Is it too early to change to snow tires in October in Northeast China?

In Northeast China, it is not too early to change to snow tires in October. Reasons for changing to snow tires in October: For vehicles in northern regions, October is the right time to change to snow tires because the temperature difference between day and night is very significant in the north. You don't need to wait until it snows to change to snow tires; instead, when the average temperature drops below 7 degrees Celsius, you should switch to snow tires. This is because regular all-season tires become harder in winter, reducing the friction coefficient. When the temperature falls below 7 degrees Celsius, the tire material undergoes changes, becoming harder, which affects the tire's grip and wear performance. Different brands of snow tires vary in softness and tread patterns. Compared to ordinary all-season tires, winter tires are made of relatively softer materials and have wider and deeper tread grooves, providing stronger grip and anti-skid performance on snowy and icy roads, ensuring the vehicle's traction in low-temperature conditions. Introduction to snow tires: Snow tires are designed for use in snowy conditions. Rubber tires with metal studs can enhance grip and are used in colder, snow-prone areas during winter. Compared to regular tires, snow tires use special formulations to increase friction with snowy and icy surfaces.
15
3
Share

Which Button is the One-Touch Defogging?

One-touch defogging is indicated by a fan-shaped symbol with three vertical wavy lines. Introduction to the One-Touch Defogging Button: The one-touch defogging function utilizes the car's air conditioning system to quickly and effectively remove fog from the windows. When driving in winter, you may notice fog forming on the windows within minutes. This occurs due to the temperature difference between the inside and outside of the car, causing condensation on the cold glass. Some drivers use a towel to wipe the fog away, but it often reappears shortly after. In such cases, the one-touch defogging function can be used. Simply press the one-touch defogging button inside the car and adjust the air vents to the front windshield position. The fog on the windshield will disappear quickly. How the One-Touch Defogging Function Works: Car defoggers are used to separate liquid droplets from gases in the tower to ensure mass transfer efficiency, reduce valuable material loss, and improve the operation of the compressor after the tower. Typically, a defogger is installed at the top of the tower. It can effectively remove droplets of 3-5um. Installing a defogger between trays not only ensures the mass transfer efficiency of the trays but also reduces the distance between them. Therefore, defoggers are mainly used for gas-liquid separation and can also serve as air filters for gas separation. Additionally, wire mesh can act as a buffer for various instruments in the instrumentation industry to prevent radio interference or as an electronic shield.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.