What does a severe powertrain malfunction mean?

3 Answers
LaLaura
07/25/25 8:21am
Severe powertrain malfunction refers to serious failures occurring in the entire mechanical arrangement process where the power generated by the engine is transmitted through a series of power transfers and finally to the wheels. The following are the reasons for severe powertrain malfunctions: 1. Incorrect ignition timing or premature ignition: Causes premature combustion and detonation of the combustible mixture; due to ignition system failures, resulting in spark plug misfires or weak sparks. 2. Cylinder compression pressure: Severe wear of pistons, piston rings, and cylinders increases the clearance between them, reducing sealing performance, leading to cylinder head leakage and decreased cylinder compression pressure; poor sealing of the crankcase reduces suction due to air leakage. 3. Clogged filter: Check if the air filter is clogged and clean it if necessary. 4. Throttle opening issue: Check the throttle opening—when the accelerator pedal is fully depressed, the throttle should be fully open; otherwise, relevant inspections and repairs should be performed.
Was this review help?
13
0
Share
EthanAnn
08/11/25 1:47pm
Severe powertrain malfunction, as I understand it, means there's a major issue with the heart of the car. Essentially, the engine, transmission, or drivetrain components could be jammed like gears, potentially causing the vehicle to break down in the middle of the road. For example, engine stalling, transmission lock-up, or a broken drive chain could suddenly bring the speed to zero, increasing the risk of a rear-end collision. I remember once during a long-distance drive when the engine overheating alarm kept flashing, which scared me into pulling over immediately to wait for assistance. Prevention is straightforward: regularly check the engine oil level, ensure the cooling system is unobstructed, and perform a major service every 10,000 kilometers. If you encounter such a situation, don't push through—safety first, prioritize towing the car to a professional repair shop.
Was this review help?
8
3
Share
Expand All
McJeremiah
09/27/25 6:49am
When it comes to severe powertrain failure, I think it's like suddenly feeling the car shaking like an earthquake while driving, with no response when you press the accelerator. Simply put, major components such as the engine or transmission system completely fail. This is different from minor daily issues—it leaves you stranded, especially dangerous when driving on highways. Personally, I once experienced a transmission failure where the entire car became uncontrollable, forcing me to turn on the hazard lights and slowly coast to the roadside. The trick is to stop immediately, turn off the engine, and check the dashboard warning lights. For prevention, I check the engine bay weekly and replace the air filter every six months to avoid accumulated wear leading to major repairs.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

Is Changan a Domestic Car Brand?

Changan Automobile's Changan brand is a domestic car brand. However, Changan Automobile actively seeks joint ventures and collaborations, having established partnerships such as Changan Suzuki, Changan Ford, Jiangling Holdings, and Changan Mazda. It also exports Chinese brand products to foreign enterprises, creating a new model of joint venture cooperation for Chinese automakers. Here is some relevant information about Changan Automobile: 1. Changan Automobile is a subsidiary of China Changan Automobile Group, ranking first among the top 50 industrial enterprises in Chongqing, among the top 20 listed companies in China, and among the top 100 manufacturing enterprises in China. Founded in 1983, Changan Automobile has a long history that can be traced back to the period of the Westernization Movement, originating from the Shanghai Arsenal established in 1862. The "Changan" trademark has been awarded the title of "China Well-Known Trademark." 2. Changan Automobile adheres to its core value of "Technological Innovation, Eternal Care" and the brand philosophy of "Reputation Worldwide, Value Creation." It is committed to leading automotive civilization through modern production lines and technological innovation, striving to provide customers with surprising and moving products and services. 3. After years of development and relentless efforts, Changan Automobile has formed a comprehensive product lineup ranging from mini vehicles, sedans, buses, trucks, SUVs, to MPVs, covering low, medium, and high-end segments with a wide series and multiple varieties. It also possesses engine platforms with displacements from 0.8L to 2.5L.
17
5
Share

Where is the car's air conditioning located?

Car air conditioning is installed on the engine. The air intake for the air conditioning is located under the wipers at the rear of the engine compartment, while the air vents are positioned in the middle of the dashboard and near the windows on both sides. Here is some related information: 1. The working principle of car air conditioning is as follows: The high-temperature, high-pressure refrigerant from the compressor enters the condenser through a high-pressure hose. Because the outside temperature is lower than the refrigerant temperature entering the condenser, with the help of the condenser fan, a large amount of heat from the refrigerant in the condenser is carried away by the outside air, thus condensing the high-temperature, high-pressure gas into a high-temperature, high-pressure liquid. 2. When this high-temperature, high-pressure liquid flows through the throttle expansion valve, due to the throttling effect, its volume suddenly increases and the pressure drops, turning into a low-temperature, low-pressure mist that enters the evaporator, where it vaporizes at a constant pressure.
5
4
Share

What are the steps for refrigerant charging?

Refrigerant charging steps are as follows: Connect the manifold gauge to the compressor and refrigerant tank. Purge air from the charging hoses. Bring the system pressure to 0.4MPa. Turn on the air conditioning, open the manual valve on the manifold gauge, and charge refrigerant to the specified value. Extension: Air conditioning refrigerant is essentially the working medium in the refrigeration cycle, utilizing phase changes of the refrigerant to transfer heat - absorbing heat when vaporizing in the evaporator and releasing heat when condensing in the condenser. Currently, there are over 80 substances that can be used as refrigerants, with the most common being ammonia, Freon compounds, water, and some hydrocarbons.
6
5
Share

China VI Emission Standard Symbol Identification?

The China VI emission standard symbol is identified as VI. More information about China VI is as follows: 1. The emission limits for China VI standards are: China VI A: Carbon monoxide 700mg/km, Non-methane hydrocarbons 68mg/km, Nitrogen oxides 60mg/km, PM particulate matter 4.5mg/km, etc.; China VI B: Carbon monoxide 500mg/km, Non-methane hydrocarbons 35mg/km, Nitrogen oxides 35mg/km, PM particulate matter 3mg/km, etc. 2. After the implementation of the China VI standard, it will only affect the registration of new China V vehicles. Already registered and annually inspected China V vehicles will not be affected in normal use.
14
1
Share

Is it better to use 92 or 95 octane gasoline for the CR-V?

For CR-V models equipped with naturally aspirated engines, 92 octane gasoline can be used; for models with turbocharged engines, it is recommended to use 95 octane gasoline. Below are specific details about refueling the car: 1. Although 95 octane gasoline has higher anti-knock properties and better performance, vehicles designed for lower octane should not blindly opt for higher octane gasoline. Higher octane numbers are more suitable for engines with larger compression ratios, while engines designed for 92 octane often have smaller compression ratios. Using 95 octane gasoline may increase engine knocking. 2. Different octane grades of gasoline should not be mixed. For example, mixing 92 and 95 octane gasoline, even if done occasionally, could potentially affect the engine over time, leading to issues such as carbon buildup in the engine and increased fuel consumption.
6
0
Share

How to Drain Engine Oil?

There are two common methods to drain engine oil: one is by removing the drain plug to let the oil flow out, and the other is by using an oil pump. It can be difficult to control the amount of oil flowing out when removing the drain plug. Alternatively, you can purchase an 80 cm long transparent hose from a hardware store to siphon the oil out. Additional information: 1. If thick blue smoke comes out of the exhaust pipe when the car is running, it indicates oil burning. Oil burning refers to engine oil entering the combustion chamber and mixing with the fuel, which can lead to rapid damage of the oxygen sensor, increased carbon deposits in the combustion chamber, higher fuel consumption, and in severe cases, irreversible engine damage. 2. Another way to detect oil burning is to fill the engine with oil, drive for 1000 kilometers, and then weigh the oil filter. Repeat this process several times. If the oil consumption exceeds 0.3 liters per 1000 kilometers, it indicates an oil burning issue.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.