What Does a Red Ribbon Tied on a Car Mean?

2 Answers
Miriam
09/03/25 7:16am
Tying a red ribbon on a car is for good luck and praying for safety. Here are some driving precautions: 1. Prevent fatigue driving: Fatigue reduces the driver's judgment and reaction time, increases operational errors, and may even cause short periods of sleep, leading to loss of vehicle control. Therefore, drivers should leave the road and rest in a safe place when feeling tired, resuming driving only after recovering. 2. Never drink and drive: Alcohol increases blood alcohol concentration, leading to central nervous system paralysis, reduced rationality, self-control, vision, and attention, as well as weakened body balance. This results in delayed reactions when operating brakes, accelerators, or clutch pedals. According to laws and regulations, drunk driving is strictly prohibited. 3. The dangers of speeding: Speeding causes mental stress, consumes significant psychological and physical energy, reduces vision, narrows the field of view, and impairs judgment, directly affecting driving stability. In emergencies, drivers often cannot react in time, leading to collisions, rollovers, or other traffic accidents.
Was this review help?
6
1
Share
LaEmerson
09/15/25 8:34am
The topic of tying red ribbons on cars is quite interesting. As an experienced driver, I often see this practice on the road. Tying red ribbons is a tradition passed down from ancestors in many places, mainly for good luck and safety. For example, when a new car is bought, a red ribbon is tied to symbolize warding off evil and bringing good fortune, similar to pasting red paper during weddings. This custom originates from Chinese traditional culture, where red represents joy and vitality. Many people still maintain this practice today, especially older car owners who believe in it more. Besides praying for blessings, red ribbons can also serve as a small warning, providing some reflective effect during nighttime driving. However, be careful not to tie them too tightly or too many, as it may affect the car's appearance and even become dangerous if they get tangled in the wheels or rearview mirrors. I think this little tradition is quite endearing, respecting tradition while adding a bit of charm to driving.
Was this review help?
7
4
Share
Expand All
More Forum Discussions

Where is the rearview mirror heating switch for the 3 Series?

The rearview mirror heating for the 3 Series is a button-type switch located among the buttons below the central control screen. Its icon features three curved upward arrows paired with a rectangle. After pressing the button, the heating element behind the rearview mirror glass will quickly heat up to a fixed temperature within a few minutes. The icon for the button-type rearview mirror heating switch needs to be distinguished from the front windshield defogging button. The front windshield defrost button is represented by a fan shape with three rising curved arrows inside, while the rearview mirror heating button is represented by a square frame with three rising curved arrows inside. In addition to button-type switches, some cars have a knob-type rearview mirror heating switch. On the driver's side door, there is a knob on the left front with several symbols: L, 0, R, and a heating symbol. The heating symbol, which is a square frame with three rising curved arrows inside, serves as the rearview mirror heating switch. Turning the knob to the heating symbol activates the rearview mirror heating function. Rearview mirror heating works by installing small heating wires inside the rearview mirror lens. When the driver activates the rearview mirror heating function, the heating wires quickly warm up to a fixed temperature, typically between 35-60 degrees Celsius, within a few minutes. This helps defog and defrost the mirror surface. The rearview mirror heating function is most commonly used during rainy, snowy, or foggy weather to ensure a clear mirror surface. Precautions for using the rearview mirror heating function: After turning on the rearview mirror heating function, the defogging or defrosting effect is not immediate. The frost or fog will gradually disappear after preheating. Excessive use of this function, especially for more than 30 minutes at a time, can affect the lifespan, clarity, and brightness of the rearview mirror. The rearview mirror heating function generally activates only when the external temperature is below 20 degrees Celsius. If the outside temperature is high, the rearview mirror will not heat up even if the switch is turned on. The rearview mirror heating function is designed to remove fog droplets and frost from the mirror surface but cannot eliminate raindrops in heavy rain. During heavy rain, the heat generated by the heating wires is insufficient to evaporate continuous raindrops, so the mirror surface may still become blurry, affecting the driver's visibility. Cars equipped with rearview mirror heating have special mirror lenses that differ from regular ones. Heating mirror lenses come with heating function connectors, so this must be taken into account when replacing rearview mirror lenses.
18
4
Share

What to do if the license plate is changed but the ETC remains the same?

After changing the license plate without changing the car, the ETC cannot be used. You can take it to an ETC service point or an ETC processing point to cancel the ETC. After successful cancellation, reactivate the ETC device and input new information. At the same time, bind the ETC card to the new license plate to make it usable. ETC installation method: Sensor installation. The ETC device is uniformly installed on the front windshield inside the car, next to the rearview mirror. It comes with a plastic suction cup to attach to the windshield. Choose an installation location that does not affect the front view of driving. Sensor wiring installation. Plug the wiring connector of the sensor into the sensor's connection port. The wiring is connected through the car's internal network, branching out from the car's intelligent information system. Wrap the wiring along the car's headliner without removing the interior trim—just press it with your hand to hide the wiring neatly. Insert the card into the ETC sensor. Gently insert the side of the card with the chip into the ETC sensor's card slot. The sensor detects the chip and reads the express card. If the card is inserted correctly, after the sensor detects the ETC express card, the sensor's display will light up and show "Start accounting," indicating that the sensor and the express card are properly connected. ETC working principle: Through the on-board electronic tag installed on the vehicle's windshield, dedicated short-range communication is established with the microwave antenna on the ETC lane at the toll station. Computer networking technology is used for backend settlement processing with the bank, allowing vehicles to pass through highway or bridge toll stations without stopping while still paying the tolls.
2
5
Share

How to Check the Mailing Status of Driver's License from DMV?

Courier companies have established online tracking services where you can input the tracking number to check detailed logistics information. Some cities offer online driver's license status inquiry services, allowing individuals to log in with personal information to check their license status. You can also use the driver's license status inquiry feature in the WeChat City Services on your mobile phone.
4
1
Share

How to Fix a Black Screen on Car Display with Sound?

Switch to a familiar interface and tap the touchscreen to check if it responds to touch. If faulty, replace it. Ensure you have installed the latest DirectX and PHY software if already upgraded to the newest version. It's possible that body vibrations while driving may have loosened the connectors; try adjusting the wiring. Power cycle the device; if ineffective, replacement may be necessary.
20
4
Share

What to Do When Car Mirrors Are Not Visible on Rainy Days?

Rain guards are easy to install and inexpensive, providing good effectiveness during light rain, but their downside is limited effectiveness during heavy rain. Apply soap to a damp cloth, then wipe the mirror with it. After the mirror dries, gently remove any residue with a tissue. The main component of water repellent is silicone oil, which alters the surface tension of water on the glass, preventing water from adhering to the mirror's surface. Scrub the mirror with detergent and wipe it dry with a towel. Once the mirror is dry, gently remove any residue with a tissue.
14
2
Share

How to Repair a Car Steering Wheel?

Steering wheel wear repair and replacement. The most straightforward method, though also the most expensive, is to replace it entirely. At a professional leather repair shop, technicians can perform leather restoration tailored to the specific condition, meticulously repairing scratches and wear, and reapplying color to faded areas. Many repair shops offer genuine leather refurbishment techniques that can maximally restore issues such as fading, wear, staining, and aging on the steering wheel. Steering wheel wear repair - DIY. Doing it yourself is also the most cost-effective method, provided the wear is not extensive.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.