What does a red battery light on the car mean?

Reasons for Shaking During Emergency Braking?

When the car shakes during braking, the cause may be due to uneven wear of the brake discs, primarily caused by the driver frequently using the point-braking method over an extended period. Below are the specific reasons for shaking during emergency braking: 1. Severe unilateral wear of the brake disc: This is due to the vehicle's own issues, mainly caused by the brake caliper not retracting properly. Car braking is achieved through the friction between two brake pads and the brake disc when squeezed by the brake caliper. Since the brake is only connected to the inner brake pad, incomplete retraction of the brake caliper after braking can lead to aggravated unilateral wear. 2. Driving habits: Continuous braking generates high heat in the brake discs. If hard braking is applied at this point, it may disrupt the dynamic balance of the brake discs. Brake discs are made of cast iron (pig iron), and although they have excellent stability, improper operation can still cause deformation. 3. Use of low-quality brake pads: Inferior brake pads contain a large amount of metal substances. When these metal substances come into contact with the brake disc, their hardness causes the brake pads to wear more slowly (they are meant to wear) and can also reduce the lifespan of the brake disc.

18

0

Share

What does SCN stand for in cars?

Automobile SCN stands for Self-Contained Navigation. Below is relevant information about automobile SCN: 1. Working principle: The self-contained navigation system uses built-in sensors to determine the vehicle's relative position and direction of travel, employs mathematical analysis to determine the driving route, compares this route with the roads on the stored electronic map to identify the vehicle's position on the map, as well as the direction to the destination and remaining distance, and displays this information on the screen, thereby providing navigation and guidance functions. 2. Other buttons: TRE for treble boost, BAL for left-right speaker balance adjustment, BAS for bass boost, FAD for front-rear speaker balance adjustment, AST for radio auto-station memory, SRC for audio source selection, SCN for radio station, CD10S for scan playback, p1~p6 for radio preset keys, snd for disc track scanning, set for settings, ast for master control return.

14

1

Share

What to Do When Tire Steel Wires Are Exposed?

Tire steel wires being exposed means the tire should be replaced directly. Here is some information about tire steel wires: 1. Introduction to Tire Steel Wires: Tire steel wires refer to the steel wires embedded in the edges of rubber tires, also known as bead wires or tire edge steel wires. Generally, they are used to manufacture steel wire bundles for the edges of tires on cars, motorcycles, tractors, and airplanes. 2. Specifications of Tire Steel Wires: The product diameters are 0.96, 1.0, 1.3, 1.4, and 1.65mm, with 1mm diameter being the main product. One type is used for manufacturing the edge steel wires of hard-edge tires like bicycles, with a diameter of 2.1mm. Tire steel wires have high tensile strength, toughness, and good fatigue resistance.

8

3

Share

What are the differences between the BMW 4 Series and 3 Series?

Here are the differences between the BMW 4 Series and 3 Series: 1. Model Types: The BMW 4 Series is the coupe version of the 3 Series. 2. Design: The BMW 3 Series only offers four-door long-wheelbase and standard-wheelbase models, while the 4 Series includes convertibles, two-door coupes, and four-door coupes. 3. Price: The BMW 4 Series is significantly more expensive than the 3 Series. 4. Engine: The BMW 4 Series has more engine options compared to the 3 Series. Here is additional information on the differences between the new and old BMW 3 Series: 1. Front Design: The new 3 Series features a flatter front design, indicating improved aerodynamics and higher demands for sportiness. 2. Headlight Design: The "Angel Eyes" headlight design has evolved further, with more aggressive daytime running lights. The lower air intake grille has sharper angles, making it less bulky compared to the current model. The fog lights have been changed from circular to a long strip shape. 3. Side Profile Design: The new 3 Series has a higher and less pronounced waistline. The Hofmeister kink has been redesigned, positioned further back, and features sharper angles.

1

4

Share

How Long Do Car Bearings Generally Last?

If properly maintained and used, car bearings can generally last around 100,000 kilometers. Here are specific details about car bearings: 1. Function: The main functions of hub bearings are to bear weight and provide precise guidance for wheel hub rotation, ensuring normal vehicle operation. In terms of load, they withstand both axial and radial loads, making them a very important component. 2. Bearing Classification: Bearings mainly include ball bearings, roller bearings, ball thrust bearings, roller thrust bearings, and cylindrical roller bearings, among others.

20

5

Share

Does the supplementary page of the driver's license need to be replaced when renewing?

The supplementary page of the driver's license needs to be replaced. The supplementary page will be updated together when a new driver's license is issued, but the file number will not change. Materials required for renewing an expired driver's license: Prepare 2 one-inch photos and a medical examination certificate. One of the photos should be pasted in the upper right corner of the medical examination form, and the other should be kept for the new license. Bring your ID card and driver's license to the license processing hall, fill out the renewal application form, then submit the documents, medical examination certificate, and renewal application form to the staff, pay the processing fee, and wait to receive the new license. Before renewing, check if there are any unprocessed traffic violations. If there are, they must be dealt with first; otherwise, the renewal will not be processed. Arrange the renewal time reasonably to avoid expiration. If the license is not renewed after expiration and you are checked by traffic police, you will be fined but not penalized with points. It is best to have the photos and medical examination certificate prepared directly at the traffic police station's license processing hall. Otherwise, self-provided materials may be deemed unqualified, requiring re-taking photos and medical examinations, which will waste time. The renewal is usually completed on the spot, but in some large cities, it may take a few days, but no more than 15 days. The new license must be processed and then notified for collection.

11

1

Share

What does a red battery light on the car mean?

Reasons for Shaking During Emergency Braking?

What does SCN stand for in cars?

What to Do When Tire Steel Wires Are Exposed?

What are the differences between the BMW 4 Series and 3 Series?

How Long Do Car Bearings Generally Last?

Does the supplementary page of the driver's license need to be replaced when renewing?

Why is the appointment for Subject 1 still under processing?

What does it mean when the i-stop yellow light is flashing?

Should the Car Be Turned Off When Waiting at a Red Light?

When was the China V emission standard implemented in Shanghai?