What does a fuel consumption of 8.8 mean?

1 Answers
LaEmery
07/29/25 6:42pm
A fuel consumption of 8.8 means that the car consumes 8.8 liters of fuel per 100 kilometers driven. Automotive fuel consumption refers to the fuel economy indicator of a car when driving on good road surfaces. With the continuous improvement in living standards, people's demands for cars have gradually increased. To reduce pollution caused by vehicles, automotive technology has also evolved rapidly, and advancements in automotive technology play a significant role in reducing fuel consumption. Factors that affect a car's fuel consumption include: vehicle weight, car design, engine displacement, and driving conditions. The relationship between vehicle weight and fuel consumption is directly proportional—the heavier the car, the higher the fuel consumption. Generally, the fuel consumption of family sedans is lower than that of SUVs. The streamlined design of sedans reduces the car's drag coefficient, resulting in relatively lower fuel consumption.
Was this review help?
13
3
Share
More Forum Discussions

What does the SET mean in Lavida?

In the Volkswagen Lavida, SET refers to the tire pressure monitoring system reset. When a yellow exclamation mark (the tire pressure warning light) appears on the Lavida's dashboard, it indicates an issue with the vehicle's tire pressure. After checking and confirming no problem or after repairing the tire, you need to clear the fault indicator on the dashboard. You can press and hold the SET button to clear the fault code, which will reset the tire pressure warning light and restore the monitoring status. Normally, you don't need to press the SET button as it is pre-set when the Lavida leaves the factory. If a tire is punctured or the tire pressure is abnormal, the dashboard will display an icon as a warning. After fixing the issue, the light may still be on. In this case, press and hold the SET button until the indicator light disappears, which means the tire pressure values have been re-recorded. The new Lavida's tire pressure monitoring system is passive and does not require any operation to function. When abnormal tire pressure is detected, the system will automatically illuminate the tire pressure warning light. However, the Lavida's dashboard does not display specific tire pressure data, so it is recommended that owners purchase a tire pressure gauge to easily monitor and adjust tire pressure during regular use.
9
5
Share

How to Use a Car Roof Rack?

Car roof racks are used as follows: 1. Secure the cargo tightly with ropes; 2. Fix the cargo evenly on the rack to prevent it from scattering. Precautions for using roof racks include: 1. Regularly check and tighten the screws after installation; 2. Be cautious while driving if there are wind-blocking items on the rack; 3. The load capacity is designed for 30 to 50kg, so do not exceed this limit. Roof racks are commonly used for self-driving trips, paired with roof boxes or frames to carry travel luggage, thereby increasing interior space. They can also transport sports equipment such as skis, bicycles, and sailboats.
10
4
Share

What is the Scrapping Age Limit for Vehicles?

The scrapping age limit for vehicles varies depending on the vehicle type: 1. Medium-sized rental passenger vehicles have a 10-year limit, while large rental passenger vehicles have a 12-year limit; 2. Rental passenger vehicles have a 15-year limit; 3. Small coach passenger vehicles have a 10-year limit, medium-sized coach passenger vehicles have a 12-year limit, and large coach passenger vehicles have a 15-year limit; 4. Public transport passenger vehicles have a 13-year limit; 5. Other small and micro-sized commercial passenger vehicles have a 10-year limit, while large and medium-sized commercial passenger vehicles have a 15-year limit; 6. Special school buses have a 15-year limit; 7. Large and medium-sized non-commercial passenger vehicles have a 20-year limit; 8. Three-wheeled vehicles and low-speed trucks with single-cylinder engines have a 9-year limit, while other cargo vehicles have a 15-year limit; 9. Ordinary cars have an 8-year limit.
11
0
Share

What is the reason for showing unreturned flow during vehicle transfer?

If the vehicle has failed inspection at other testing stations, the flow cannot be returned. Below is the relevant introduction: Vehicle Transfer: Vehicle transfer refers to changing the name of the vehicle's owner. Notes: Every vehicle has a fixed registration, similar to a person's household registration. The vehicle registration mainly records the owner and address of the vehicle, as well as some relevant vehicle parameters. A transferred vehicle proves that the vehicle belongs to the current owner and has no accidents or violations. If there are issues with the vehicle, such as involvement in an accident, failure to participate in annual inspection, being a stolen vehicle, or a smuggled vehicle, it cannot be transferred through normal procedures.
4
1
Share

What is the function of the cylinder head cover?

The functions of the cylinder head cover are: 1. To cover and seal the cylinder head, keeping the oil inside while keeping dirt and moisture contaminants out; 2. To separate the oil from the air; 3. To serve as an oil filler port; 4. To act as a mounting bracket for sensors, including the camshaft position and camshaft timing sensors. The cylinder head primarily seals the cylinder, forming the combustion chamber together with the piston and withstanding the effects of high-temperature and high-pressure gases. The cylinder head endures the mechanical load caused by gas forces and the tightening of cylinder bolts, as well as high thermal loads due to contact with high-temperature gases. To ensure good sealing of the cylinder, the cylinder head must not be damaged or deformed. Therefore, the cylinder head should have sufficient strength and stiffness.
2
1
Share

How to Determine the Production Date of Car Seat Belts?

To determine the production date of car seat belts, follow these steps: locate the label on the seat belt, which typically features the car brand's logo and a QR code. The production date of the seat belt is also printed on this label. The function of seat belts is to: instantly tighten during a vehicle collision or when emergency braking is applied, securing the occupants firmly in their seats to prevent secondary collisions. The method for replacing seat belts is as follows: 1. Locate the wiring under the car seat to find the sensor wire for the seat belt buckle. 2. Remove the seat cushion, take out the airbag, find the bolt securing the seat belt, and remove the seat belt buckle. 3. Search for the seat cushion sensor within the seat cushion and remove it. 4. Install the new seat belt buckle onto the seat and insert the bolt. 5. Mount the weight sensor onto the car seat, then install the new retractor and tighten it with a wrench. 6. Reinstall the seat cushion onto the car seat and properly arrange the wiring at the bottom of the seat.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.