What does a fuel consumption of 6L mean?

1 Answers
LeAlejandro
07/29/25 6:23pm
Fuel consumption of 6L refers to the car consuming 6 liters of fuel per 100 kilometers traveled. Typically, a car's fuel consumption is calculated per 100 kilometers. The formula for calculating fuel consumption is: fuel consumption per 100 kilometers equals fuel consumption divided by distance traveled multiplied by 100. There are many factors that affect a car's fuel consumption, such as tire pressure, driving habits, vehicle load, and driving conditions. Tire pressure is one of the important factors affecting a car's fuel consumption. Whether the tire pressure is too low or too high, it will affect the car's fuel consumption, so it is necessary to maintain normal tire pressure. Driving habits also affect a car's fuel consumption. Drivers should avoid sudden acceleration and sudden braking during driving, as these behaviors will increase the car's fuel consumption. The heavier the car, the higher the fuel consumption will be.
Was this review help?
12
1
Share
More Forum Discussions

What are the differences between Honda's second-generation and third-generation hybrid systems?

The main difference between the third-generation and second-generation systems is the adoption of a more thermally efficient Atkinson engine. The specific details are as follows: 1. Honda's i-MMD hybrid system features three different driving modes: Pure Electric Drive Mode (EV-Drive-Mode), Hybrid Drive Mode (Hybrid-Drive-Mode), and Engine Drive Mode (Engine-Drive-Mode). It switches between these modes based on different driving conditions to achieve optimal performance. 2. There are no structural or operational changes between the third-generation i-MMD system and the second-generation i-MMD system. Both still use a 2.0L Atkinson cycle engine, dual electric motors, and a lithium-ion battery pack. However, in the third-generation i-MMD system, Honda optimized the 2.0L Atkinson cycle engine, increasing its thermal efficiency to 40.6%, higher than the previous generation Accord Hybrid's 38.9%. Additionally, the power unit (IPU) is 32% smaller in volume compared to the previous generation Accord Hybrid, and it also utilizes Honda's newly developed rare-earth-free magnet motors.
9
4
Share

How to Turn on the High Beam on a Volkswagen?

Volkswagen high beam switch operation steps are as follows: 1. There is a button next to the instrument panel on the left door, rotate it to position 4 to turn on the high/low beam indicator. 2. Push the light combination lever downward, and the high beam indicator will light up. Volkswagen Lavida headlight operation method: 1. Turn the light control switch on the left side of the steering wheel forward one notch to turn on the position lights, also known as marker lights. 2. Turn the light control switch inward twice to turn on the low beam, mainly used for urban night driving. 3. Push the light control switch forward once to turn on the high beam. 4. Lift the light control switch upward once for the right turn signal, and push it downward to the left for the left turn signal. 5. Between the instrument panel and the co-driver's console, there are two light control switches. One is the fog light, used for driving in foggy conditions. The other is the hazard warning light.
14
1
Share

How to adjust the rearview mirror on the Tiguan L?

Correct adjustment angles for rearview mirrors: 1. Center rearview mirror: When the mirror is parallel to the horizon and the horizon is positioned at the center of the mirror (1/2 of the mirror surface), the field of view is optimal. 2. Left rearview mirror: Since the driver's seat is on the left, adjusting the left rearview mirror is particularly important. It is recommended to adjust the car's image to occupy 1/4 of the mirror surface and the horizon to occupy 1/2 of the mirror surface. Note that the car's image should not be too small, as this makes it difficult to observe the actual situation of the vehicle closely following behind; nor should it be too large, as this would obscure the view of vehicles in other lanes. 3. Right rearview mirror: Due to the driver's seat being on the left, the right rearview mirror has a larger blind spot, and the adjustment method differs from the left. The car's image should still occupy 1/4 of the mirror surface, but the horizon should be adjusted to 2/3 of the right rearview mirror.
2
5
Share

What is the reason for no warm air in BMW 5 Series?

If there is no warm air in BMW 5 Series, it may be an operation issue. You need to adjust the air outlet control button to the red position. There is no need to turn on the air conditioning. Simply press the air blower button and then increase the temperature. Precautions for using car air conditioning warm air are as follows: 1. The warm air should not be blown directly at the head. Blowing warm air at the head for a long time can cause driver fatigue and affect driving safety. It is recommended to open the window slightly for air circulation when using the heater for a long time to ensure the oxygen content in the car and keep the driver alert. 2. Do not keep the heater on when sleeping in the car, as it can easily cause carbon monoxide poisoning. 3. After turning on the heater, the car becomes a closed space, which provides a good environment for bacterial growth and spread. If someone smokes in the car, the amine and nicotine in the smoke will adhere to the surface of the evaporator. When the air conditioning is not used frequently or in rainy weather, bacteria will spread extensively on the surface of the evaporator, causing air pollution in the car when the air conditioning is turned on again.
4
2
Share

Is a tire pressure of 275 kPa normal?

A tire pressure of 275 kPa is not normal. The normal range for car tire pressure is generally between 2.3-2.5 bar. Hazards of excessive tire pressure: The friction and adhesion of the tire will decrease, affecting braking performance; It can cause steering wheel vibration and deviation, reducing driving comfort; Accelerates localized wear on the central tread pattern of the tire, shortening its lifespan; Increases vehicle body vibration, indirectly affecting the lifespan of other components; Causes excessive stretching deformation of the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks or blowouts, leading to a flat tire. Methods for insufficient tire pressure: If no damage is visible, simply inflate to normal pressure and reset the tire pressure system; If inspection reveals a puncture, promptly drive to a tire shop for repair and reinflation; If the tire pressure warning reappears after inflation without any punctures, it may be due to air leakage from a deformed wheel rim. It is recommended to inspect and replace the wheel rim.
13
5
Share

Is a Tire Pressure of 180 Normal?

Tire pressure of 180 kPa is not normal. According to the international standard GBT2978-2008, the recommended pressure for standard tires is 240-250 kPa; for reinforced tires, it is 280-390 kPa. The maximum pressure should not exceed 350 kPa. A pressure of 170 kPa is considered too low and driving should not be continued. Hazards of low tire pressure: Increased friction with the road surface, leading to higher fuel consumption; Heavier steering wheel and increased risk of veering, compromising driving safety; Excessive movement of tire components, causing abnormal heat due to over-rolling; Reduced functionality of the cords and rubber, leading to delamination or cord breakage, and excessive friction with the rim, causing damage to the bead area and abnormal wear; Multiplied friction between the tire and the ground, causing a sharp rise in tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a blowout; Increased tire deformation, making the sidewalls prone to cracking, along with flexing movements that cause overheating, accelerating rubber aging, fatigue of the cord layers, and cord breakage. It also increases the tire's contact area, accelerating shoulder wear. Solutions for insufficient tire pressure: If no damage is visible, simply inflate the tire to the normal pressure and reset the tire pressure system; If a puncture is found during inspection, drive to a tire shop promptly for repair and reinflation; If the tire pressure warning reappears after inflation without any punctures, it may be due to air leakage caused by a deformed rim. It is recommended to inspect and replace the rim if necessary.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.