What does a fuel consumption of 3.1L mean?

What are the symptoms of a faulty high-pressure fuel pump?

High-pressure fuel pump failure symptoms are similar to those of a gasoline pump, including severe vibration, poor acceleration, unstable idle, difficulty starting, and even stalling. More extended information is as follows: Overview: Both gasoline pumps and high-pressure fuel pumps can fail, but the probability of failure is not high. Moreover, with proper usage, they can last over 100,000 kilometers without any issues. For high-pressure fuel pumps, unlike electronically driven gasoline pumps, they are purely mechanically driven (by the camshaft), and their failures typically include mechanical damage, clogging, oil leakage, etc. Working Principle: During the suction process, the downward movement of the pump piston provides the suction force, simultaneously opening the intake valve to draw fuel into the pump chamber. In the final third of the pump cycle, the fuel pressure regulator valve is energized, allowing the intake valve to remain open during the initial upward movement of the pump piston for fuel return.

8

1

Share

Does a newly replaced battery need to be charged?

Generally, new batteries come with some charge from the factory but not fully charged, so charging is recommended. However, it can also be used directly without charging. If the new battery has been sitting for a while, it will naturally discharge over time, even if unused, and the charge may be insufficient, requiring charging. Here are some precautions for battery usage: 1. Lead-acid batteries are highly affected by temperature. For every 1°C drop in ambient temperature, the battery capacity decreases by 0.8%. At -10°C, the battery capacity is only 72% of its normal value, and at -20°C, it drops to 64%. Conversely, higher temperatures increase capacity. Therefore, temperature should be considered, though extreme temperature changes are generally not a concern. 2. Over-discharging, or deep discharging, significantly reduces battery lifespan. To avoid frequent replacements, monitor battery consumption—avoid both over-discharging and overcharging. 3. Fast charging at typical charging stations is very quick, taking about 40 minutes to fully charge, so be mindful of charging duration.

18

2

Share

Is it necessary to drive the car for vehicle transfer?

Vehicle transfer requires the car to be present on-site. Below is the process for vehicle transfer: 1. At the hall window, obtain the used motor vehicle sales contract and fill it out. This contract is in triplicate, with one copy each for the buyer, the seller, and the industrial and commercial department. 2. Drive the vehicle directly to the transfer inspection area for inspection, photography, tracing, and license plate removal. Fill out the inspection record form, and after all procedures are completed, drive the car back to the parking lot, then proceed to the transfer hall to complete the formalities. 3. After returning to the transfer hall, take a number, queue up, and wait for your number to be called. The staff will confirm that the vehicle has no violations before starting the transfer process, and the transfer fee will need to be paid. 4. After payment, proceed to the transfer acceptance window to complete the relevant procedures. Before processing, you need to fill out the Motor Vehicle Registration, Transfer, and Cancellation Form and the Motor Vehicle Import Registration Form. 5. After completing the transfer acceptance, take the receipt to the payment window to pay the transfer fee. Then, you can select a new license plate number and receive the new license plate, vehicle license, and registration certificate, marking the completion of the transfer.

5

0

Share

What engine is used in the BAIC Senova D50?

The Senova D50 is equipped with two types of engines: a 1.5-liter turbocharged engine and a 1.5-liter naturally aspirated engine. Additional information: 1. The 1.5-liter naturally aspirated engine delivers 116 horsepower and a maximum torque of 148 Nm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a CVT transmission. 2. The 1.5-liter turbocharged engine produces 150 horsepower and a maximum torque of 210 Nm. This engine also features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is matched with either a 6-speed manual transmission or a CVT transmission. 3. The Senova D50's front suspension employs a MacPherson independent suspension, while the rear suspension uses an H-type torsion beam non-independent suspension. The torsion beam suspension has a compact size, occupies less space, and is cost-effective. Using this type of suspension helps to expand the rear seating space and trunk capacity.

10

0

Share

Can a successfully scheduled Subject 1 exam be canceled?

Subject 1 exam can be canceled after successful scheduling, but it must be canceled at least one day in advance. Cancellation is not possible on the same day. If you are unable to attend the exam, an absence will be treated as a failure. Therefore, students should manage their time well to avoid missing the exam, otherwise, they will only waste money in vain. It's important to note that a retake of Subject 1 requires payment of a retake fee. Methods to cancel a scheduled Subject 1 exam: Depending on the status of the appointment, the cancellation method may vary. If scheduled online and the appointment is not yet confirmed, you can enter the scheduling interface online to cancel the exam appointment. Notes on canceling an appointment: If the appointment has been successfully scheduled and you have received an exam notification SMS, you need to bring your ID card and a written application to the local DMV's service window to cancel. At this point, the exam cannot be canceled online. Although there is no limit to the number of retakes for Subject 1, the ranking for rescheduling after cancellation will drop. If there are many candidates scheduling exams locally, the chance of successful scheduling next time will be lower.

9

1

Share

How to Heat the Rearview Mirror of the Mazda3 Axela?

The method to heat the rearview mirror of the Mazda3 Axela: The rearview mirror heating switch is located on the far right of the first row of buttons on the air conditioning panel. Simply turn it on. During rainy or snowy weather, after turning on the rearview mirror heating switch, the electric heating element will quickly heat up to a fixed temperature within a few minutes, typically between 35 to 60 degrees Celsius. At the same time, water droplets on the mirror surface will evaporate as the temperature rises, becoming smaller, and fog will gradually disappear, achieving the effect of heating the mirror, defogging, and defrosting. The Mazda3 Axela is a compact car produced by Changan Mazda. Taking the 2021 Mazda3 Axela as an example, in terms of power, the 1.5-liter engine of the 2021 Mazda3 Axela has a maximum power of 86kW and a peak torque of 148 Nm; the 2.0-liter engine has a maximum power of 116kW and a peak torque of 202 Nm, paired with a 6-speed manual or 6-speed automatic transmission.

6

5

Share

What does a fuel consumption of 3.1L mean?

What are the symptoms of a faulty high-pressure fuel pump?

Does a newly replaced battery need to be charged?

Is it necessary to drive the car for vehicle transfer?

What engine is used in the BAIC Senova D50?

Can a successfully scheduled Subject 1 exam be canceled?

How to Heat the Rearview Mirror of the Mazda3 Axela?

Where is the air filter for the Touareg located?

What licenses are required for four-wheel electric vehicles?

How Long Does It Take to Drive 2400 Kilometers?

Does a B2 driver's license still need annual review if no points are deducted?