What does a faucet symbol on the car dashboard mean?

1 Answers
DeLilliana
07/25/25 4:05am
The appearance of a faucet symbol on the dashboard indicates an engine malfunction in the vehicle. When this symbol appears, it signifies that the car's engine has encountered a problem. Engine malfunctions may lead to unstable driving conditions, frequent stalling, difficulty starting the engine, reduced power output, and abnormal vibrations. The hazards associated with an illuminated engine warning light include: 1. Deterioration of exhaust gas quality, leading to environmental pollution. 2. Increased fuel consumption, resulting in wastage of petroleum resources and financial resources. 3. Elevated combustion chamber temperatures and accelerated wear, potentially causing premature engine damage. 4. Engine oil burning. 5. Increased engine noise, affecting driving and passenger comfort.
Was this review help?
6
3
Share
More Forum Discussions

How Long After Crystal Coating Can You Expose the Car to Rain and Wash It?

After crystal coating, avoid exposing the car to rain for 24 hours, do not wipe the paint surface for three days, and refrain from washing the car for one week. Below are the specific details about vehicle crystal coating: Consequences of washing the car too soon after coating: Do not rinse the vehicle within one week after crystal coating to prevent damage to the paint surface. The coating fully solidifies after 24 hours: The crystal coating agent takes 24 hours to fully bond with the car paint, forming the final protective crystal layer. A restoration treatment is needed after coating: 4 to 6 months after crystal coating, visit a detailing shop for paint purification and restoration to enhance the coating's effectiveness and prolong its durability. Avoid touching the paint surface: After crystal coating, try not to touch the paint surface to avoid affecting the final coating results.
2
0
Share

Is It Normal to Use 20 Wheel Weights for Dynamic Balancing?

It is normal to use 20 wheel weights for dynamic balancing as long as the vehicle's wheel hub remains balanced. The correct method for applying tire balancing weights is to select appropriate weights based on the gram value indicated by the balancer. Rotate the tire until the balancer's indicator turns completely red or reaches the center, then attach or hammer the weights at the 12 o'clock position of the tire. Below is relevant information about dynamic balancing: Reasons for performing dynamic balancing: Vehicle dynamic balancing ensures equilibrium among the wheels while driving. To prevent an unbalanced state caused by uneven mass distribution in various parts of the vehicle, dynamic balancing is necessary. Benefits of dynamic balancing: Regular balance checks not only extend the lifespan of car tires but also improve driving stability, avoiding accidents caused by tire wobbling, bouncing, or loss of control during high-speed driving.
9
0
Share

What does a broken A-pillar mean?

Passat's broken A-pillar refers to the situation where the A-pillar of the Volkswagen Passat fractured during the frontal 25% offset crash test. Below is an introduction about the Passat's broken A-pillar: The importance of the A-pillar: The A-pillar is an essential structural component for modern enclosed vehicles. Since most cars today use a unibody structure where the entire body serves as the frame and bears all loads, the presence of the A-pillar provides higher stability and body rigidity to the unibody structure. About the Passat model: The Passat is a mid-size sedan designed by Volkswagen AG of Germany, classified as a B-segment car in Volkswagen's lineup. Since its debut in 1973, the Volkswagen Passat has dominated the global automotive market for over 40 years with its high safety standards, classic design, and top-tier manufacturing quality.
5
1
Share

What are the reasons for the power system warning light to illuminate?

Engine warning light illumination is typically caused by the following reasons: Poor combustion condition: Suboptimal engine combustion is the primary cause of the engine warning light activation. During vehicle operation or at the moment of ignition, the engine fault indicator on the dashboard (usually red or yellow) illuminates. In most cases, it won't disappear automatically, though it might in rare instances - this is what's referred to as engine warning light activation. Engine knocking: In the first scenario, some engine warning lights may illuminate while others won't; in the second and third scenarios, the light will inevitably activate. Underlying causes for engine warning light illumination include: Poor fuel quality; Dirty engine cylinders with carbon deposits. Over time, engines inevitably accumulate carbon deposits which alter design parameters and, due to their unstable nature and heat retention properties, can cause irregular ignition leading to engine knocking. Cooling system malfunctions such as piston scuffing, knocking, internal cylinder leakage, severe noise generation, and reduced acceleration power: These occur due to abnormal engine operating temperatures, excessive pressure, and poor cooling system conditions. A malfunctioning cooling system directly prevents the engine from operating at normal temperatures, subsequently causing the aforementioned severe fault symptoms.
3
5
Share

What is the difference between coated wiper blades and ordinary wiper blades?

Coated wiper blades have an automatic coating function. Ordinary wipers have no special effects. The differences between the two are as follows: Usage effect: Coated wiper blades have an automatic coating function. During rainy days, they form a special protective film on the windshield containing lubricating and water-repellent components, which allows rainwater to bead up automatically and roll off like water droplets on a lotus leaf. This helps to promptly and effectively remove rainwater from the glass, ensuring clearer visibility. Introduction to wiper blades: If the wiper blades have been in use for 1-2 years, it is recommended to replace them in a timely manner, as the rubber strips may have started to age due to prolonged exposure to wind and sunlight. Carefully observe whether the wiper blades clean the windshield effectively during light rain. If the result is blurry, it is advisable to consider replacing them.
2
5
Share

Can a One-Eyed Person Obtain a Driver's License?

One-eyed individuals can obtain a driver's license if their vision meets the required standards. Below are the details about the driving test subjects: Subject 1: Road traffic safety laws, regulations, and related knowledge test, conducted via written or computer-based exam, with a perfect score of 100, and a passing score of 90 or above (including 90). Subject 2: Field driving skills test, involving actual vehicle operation in a controlled area, with results categorized as pass or fail. It includes reversing into a garage, parallel parking, S-curve driving, right-angle turns, and hill starts and stops, with a perfect score of 100, and a passing score of 80 or above (including 80). Subject 3: Road driving skills test, conducted on actual roads or simulated environments, with a perfect score of 100. Passing scores are 90 or above for large buses, 80 or above for large trucks, and 70 or above for other vehicle types. Subject 4: Safe and civilized driving knowledge test, with a perfect score of 100, and a passing score of 90 or above (including 90).
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.