···
Log in / Register

What Does a Dual-Engine Car Mean?

4 Answers
EvelynLynn
08/26/25 4:37am

It refers to a vehicle powered by two "engines" working together, meaning the car is equipped with two power systems: a gasoline engine and an electric motor. Below are the advantages of a dual-engine car: 1. Low Energy Consumption at Idle: The electric motor does not consume any energy when idle, remaining completely off. It consumes less energy than the gasoline engine during low-speed driving. 2. Excellent Performance at High Speeds: The gasoline engine performs better at high speeds, delivering more power for the same engine weight. This means the electric motor is more efficient during stop-and-go traffic in peak hours. 3. Pollution-Free: It does not produce any exhaust gases, thereby reducing smog pollution levels.

Was this review help?
1
0
Share
Tiffany
09/08/25 6:08am

As an automotive enthusiast, I'd like to explain the meaning of dual-engine cars. Essentially, these are hybrid vehicles like the Toyota Prius, equipped with both a gasoline engine and an electric motor that work in tandem to optimize energy usage. During urban commuting, the electric component kicks in, saving fuel and operating quietly; at high speeds or during rapid acceleration, the gasoline engine takes over to provide power. This design significantly reduces fuel consumption – my car's actual measured fuel efficiency is over 20% better than comparable gasoline-only vehicles. Even better is the regenerative braking technology that recaptures energy during deceleration to recharge the battery. While battery lifespan sometimes raises concerns, modern models come with extended warranties and proven reliability. Overall, dual-engine cars represent a more efficient power solution that's environmentally friendly and wallet-friendly, making them a current market trend.

Was this review help?
7
3
Share
Expand All
SanEvangeline
10/22/25 6:12am

As an environmental advocate, I view dual-engine cars as a green innovation. Essentially, they are hybrid systems that integrate both a traditional gasoline engine and an electric motor as dual power sources. This design significantly reduces emissions, especially when operating in pure electric mode during city driving, cutting tailpipe emissions by up to 30%. I truly appreciate how they gradually reduce dependence on petroleum and help conserve Earth's resources. Some models even support plug-in charging, extending their pure electric range. With intelligent control systems, energy efficiency is greatly improved, making them both economical and sustainable. While not fully electric vehicles, they offer a practical transition path toward zero emissions and deserve wider adoption as a choice for more people.

Was this review help?
2
4
Share
Expand All
CalvinFitz
12/05/25 6:36am

From a technical perspective, dual-engine vehicles primarily refer to hybrid models. They feature two core power sources: an internal combustion engine and an electric motor, which are coordinated by computer control to enhance efficiency. The fundamental principle is straightforward – electric power is used for starting and low-speed driving to save fuel and reduce noise; when more power is needed, the engine kicks in to supplement or generate electricity for driving; regenerative braking recovers energy. The system employs planetary gears for seamless transitions, and in my experience, the operation is smooth and reliable. Although common hybrid designs are complex, maintenance is relatively straightforward. This represents an energy-saving innovation that reduces waste and improves performance.

Was this review help?
15
3
Share
Expand All
More Forum Discussions

What brand is the Leiling shock absorber?

The shock absorber of the Leiling is from the KYB brand. KYB combines advanced hydraulic technology with electronic technology, growing alongside the era with its core vibration control and power control technologies. It integrates system technology and electronic control technology, continuously providing strong support for comfort and safety across various industries. Below is an explanation about shock absorbers: 1. Shock absorber (Absorber) is used to suppress the oscillation after the spring absorbs shocks and impacts from the road. Widely used in automobiles, it accelerates the attenuation of frame and body vibrations to improve the vehicle's ride smoothness. 2. When passing over uneven road surfaces, although the shock-absorbing spring can filter road vibrations, the spring itself still has reciprocating motion, and the shock absorber is used to suppress this spring bounce. 3. If the shock absorber is too soft, the body will bounce up and down; if it's too hard, it will create excessive resistance, hindering the spring's normal operation. During modifications to the suspension system, a hard shock absorber should be paired with a hard spring, and the spring's hardness is closely related to the vehicle's weight. Therefore, heavier vehicles generally use harder shock absorbers. The device connected to the vibration-damping crankshaft is used to counteract the crankshaft's torsional vibration (the phenomenon where the crankshaft twists due to the impact force of cylinder ignition).
5
1
Share

How to Start a Lamando Automatic Transmission Car?

Starting steps for a Lamando automatic transmission car: 1. Before starting the car, ensure the gear lever is in P (Park) or N (Neutral) position. 2. When starting, coordinate the brake, handbrake, and accelerator properly. 3. After shifting to D (Drive) gear, release the handbrake while slowly lifting the brake pedal, then gently press the accelerator to allow the vehicle to start smoothly. Below is a detailed introduction to the Lamando: 1. As a sporty coupe specifically launched by SAIC Volkswagen for the Chinese market, the Lamando was officially promoted as a "luxury and comfortable wide-body coupe" at its debut. Its appearance is indeed dynamic and stylish. After the mid-term facelift, its configuration was upgraded while its sporty attributes were enhanced, making it quite attractive to many young consumers. 2. In terms of configuration: The Lamando comes standard with LED headlights, engine start-stop, auto hold, in-cabin PM2.5 filter, ambient lighting, etc. Mid-to-high trim models offer additional options such as sport seats, an 8-inch LCD screen, cruise control, and carbon fiber-style interior trim. 3. In terms of power: The Lamando is equipped with a 1.4T turbocharged engine. The entry-level model features a low-power version with a maximum power of 96kW (131PS) and a peak torque of 225N·m, paired with a DSG 7-speed dual-clutch transmission or a 5-speed manual transmission. Mid-to-high trim models are equipped with a high-power version of the 1.4T engine, delivering a maximum power of 110kW (150PS) and a peak torque of 250N·m, matched with a DSG 7-speed dual-clutch transmission. As a sport-oriented model, the high-power version is more recommended.
16
0
Share

Where is the USB port located in the 2015 Sagitar?

The USB port of the 2015 Sagitar is located below the central control screen. The main functions of the USB port in a car are: utilizing the car's standard power supply to charge electrical devices via the USB interface or serving as a fixed power supply port for electrical devices. Precautions for using the USB port: 1. Charging should only be done when the car's engine is running to avoid damage to electrical devices due to unstable power supply. 2. Do not connect too many electrical devices to prevent overloading and damaging the car battery and alternator. 3. Avoid using the USB port during thunderstorms to prevent lightning strike accidents. 4. Do not use the USB port in humid environments. Rust or water stains may cause the USB device to fail to connect properly.
3
2
Share

What are the body dimensions of the Chevrolet Orlando?

The Chevrolet Orlando has a length, width, and height of 4684 1807 1627mm, with a wheelbase of 2796mm. Below is an introduction to the Chevrolet Orlando: 1. The Chevrolet Orlando is a compact SUV launched by Chevrolet. As a compact SUV, compared to other models in the same class, this car offers excellent space performance. To meet the diverse needs of consumers, it is available in both five-seat and seven-seat versions. 2. Exterior design: The car features Chevrolet's family-style design, with a large front grille that uses a blackened design. The upward-slanting headlights are connected to the grille, further highlighting the car's refined feel. For those who need more space, the seven-seat version is recommended, as its spaciousness aligns well with the demands of Chinese consumers. 3. Powertrain: The car is equipped with a 1.3T turbocharged engine, delivering a maximum power of 120kW and a maximum torque of 230Nm. 4. Transmission system: The engine is paired with a 6-speed automatic transmission, providing overall performance that meets daily driving needs.
19
4
Share

How to Adjust the Time on the Bora Dashboard?

Method to adjust the time on the Bora dashboard: The button on the left side of the dashboard adjusts the hours; the button on the right side adjusts the minutes. By using both buttons together, you can set the time. Below is an introduction to the dashboard: 1. Generally, conventional car dashboards include a speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, and charging gauge. 2. In modern cars, the dashboard also requires a voltage regulator, specifically designed to stabilize the power supply voltage for the dashboard, suppressing fluctuations to ensure the accuracy of the car dashboard. 3. Additionally, most dashboard displays rely on sensors. The sensing device changes its resistance value based on the monitored object's state, which is then displayed on the dashboard. The most prominent gauge on the dashboard is the speedometer, which indicates the car's speed in km/h (kilometers per hour). The speedometer actually consists of two gauges: one is the speed gauge, and the other is the odometer.
18
3
Share

Where is the tire pressure monitoring system located on the Baojun 730?

Baojun 730's tire pressure can be viewed directly on the dashboard. Only the Luxury and Premium trim levels of the Baojun 730 are equipped with a tire pressure monitoring system, which is a direct-type system that displays tire pressure data on the dashboard without requiring any manual operation. The tire pressure monitoring system is a type of active safety device. It can promptly alert the driver when there are dangerous signs in the tires, prompting them to take appropriate measures, thereby preventing serious accidents. With a tire pressure monitoring system, we can ensure that the tires always operate within the specified pressure and temperature ranges, reducing tire damage and extending their service life. Data shows that driving with insufficient tire pressure—when the pressure drops 10% below the normal value—reduces tire life by 15%. When the tire pressure is too low, it increases the contact area between the tire and the ground, thereby increasing friction resistance. If the tire pressure is 30% below the standard value, fuel consumption will rise by 10%. When the tire pressure is excessively high, it reduces the tire's own shock absorption effect, increasing the burden on the vehicle's suspension system. Prolonged use under such conditions can cause significant damage to the engine chassis and suspension system. Additionally, uneven tire pressure can easily lead to braking deviation, further increasing wear on the suspension system.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.