What does a car keyless start system mean?

2 Answers
DelViolet
07/29/25 12:48am
Car keyless start system means starting the vehicle without taking out or turning a physical key. The key can be kept in a bag or pocket, and the engine can be ignited by pressing a button inside the car or turning a knob. Below is more information about the keyless start system: 1. Types of keyless start: Button type: The ignition button is located within easy reach on the center console, hence also known as "one-button start," such as in BMW and Mercedes-Benz; Knob type: Generally located at the original key slot, but without the need to insert the car key, simply turning the knob can start the engine, such as in Nissan and Mazda. 2. Opening and closing doors: Normally, when the key is within an effective detection distance of about 1.5 meters from the main door, the ID of the key chip will automatically match with the engine's ID. After successful pairing, the car door will open without the need for a key. When the driver leaves the vehicle, the door locks will automatically engage and enter an anti-theft state. However, if the smart key runs out of battery, there is a sensor button on the vehicle's door handle, as well as a keyhole, for use in case the smart card is damaged or out of power. 3. Starting and stopping the vehicle: When entering the car, the vehicle's detection system will immediately recognize the smart card. After confirmation, the car's computer will enter a working state, and then simply pressing the one-button start button (or knob) inside the car can normally start the vehicle. Similarly, when the vehicle needs to be parked and turned off, just press the one-button start button (or knob) after the car comes to a complete stop to shut down the engine.
Was this review help?
10
1
Share
Perez
08/12/25 5:00am
The keyless start system is one of my favorite car features, especially practical when rushing to work every day. In the past, I had to dig through my bag for the key before driving, but now just carrying the key near the car door and pulling the handle automatically unlocks it. Once inside, stepping on the brake and pressing the button with a lightning symbol on the center console makes the engine roar to life. This system relies on a small chip in the car key and sensors in the car body confirming each other's signals. The most convenient part is not having to free up a hand to take out the key when opening the door or starting the car, especially in winter when holding a coffee cup. However, my wife once left the key in the trunk, and the car automatically locked, requiring us to find the spare key to open it—something to remind everyone to be careful about.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

How Often Should Car Air Conditioning Be Recharged with Freon?

There is no fixed interval for recharging car air conditioning with Freon. When the cooling effect of the car air conditioning deteriorates, you can check if the Freon level is low and proceed with replacement or replenishment. The method of using car air conditioning is as follows: 1. After starting the vehicle, turn the air conditioning knob to the cooling or heating zone; 2. Press the AC button when cooling is needed. The functions of car air conditioning are: 1. To provide a comfortable riding environment for passengers and reduce travel fatigue; 2. To create favorable working conditions for the driver and ensure safe driving. Car air conditioning, also known as the car air regulation device, is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to an optimal state. Its components include the refrigeration system, heating system, air purification device, and control system.
6
3
Share

How to Test an Automotive Ignition Coil?

Testing methods for ignition coils include: 1. When testing an ignition coil, the primary method involves using a multimeter to measure the resistance values of the primary and secondary windings. 2. The performance of an ignition coil can be tested on a universal test bench, mainly by measuring the spark gap to determine its performance. Additional information: 1. An ignition coil is a transformer that generates the high voltage required for ignition, converting 12V low voltage into 15–20kV high voltage. 2. However, the working principle of an ignition coil differs from that of a regular transformer. While a regular transformer operates continuously, an ignition coil works intermittently, storing and releasing energy at varying frequencies depending on the engine's speed.
7
3
Share

How to Remove the Rear Seat Cushion of a Santana?

The method to remove the rear seat cushion of a Santana is: 1. Pull the handle near the window; 2. Fold the backrest of the rear seat forward to detach it. Taking the Volkswagen Santana 2021 model as an example, its body dimensions are: length 4475mm, width 1706mm, height 1469mm, wheelbase 2603mm, and fuel tank capacity 52.8L. The Volkswagen Santana 2021 model is equipped with a 1.5L naturally aspirated engine, with a maximum power of 82kW, maximum torque of 145Nm, maximum power speed of 6100rpm, and maximum torque speed of 4000rpm.
15
0
Share

Where is the fuel filter located on the Changan Ford Edge?

The fuel filter on the Changan Ford Edge is located inside the fuel tank. The fuel filter is designed to remove impurities from the gasoline, ensuring that the fuel entering the engine for combustion is clean. This promotes more complete combustion and reduces the formation of carbon deposits in the cylinders. Taking the 2021 Changan Ford Edge as an example, its body dimensions are: length 4878mm, width 1925mm, height 1734mm, with a wheelbase of 2850mm. The 2021 Changan Ford Edge is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 180 kW and a maximum torque of 390 Nm. It is paired with an 8-speed automatic manual transmission.
6
2
Share

How to Repair Car Paint Cracks?

Car paint cracks can be repaired by following these steps: 1. Clean the car paint surface and ensure it is thoroughly dried; 2. Remove the cracked portion of the paint; 3. Reapply the paint using the required coating method and materials. The layers of car paint, from the inside out, are: the electrocoating layer, the primer layer, the color coat layer, and the clear coat layer. Methods to maintain car paint include: 1. Promptly remove snow, rainwater, and other dirt from the car surface to keep the paint clean and aesthetically pleasing; 2. Apply wax to the car body to protect the paint, preventing cracking, corrosion, and rust; 3. Regularly inspect the car body surface and promptly repaint any damaged, scratched, or exposed areas; 4. Use specialized detergents and neutral water to wash the car body; 5. Wipe the car body with a soft cloth or sponge to avoid mixing in metal shavings and sand particles.
13
0
Share

How to Turn on the Heater in the Mazda3 Axela?

The method to turn on the heater in the Mazda3 Axela is: start the vehicle and adjust the temperature to the heating mode. The Mazda3 Axela is a compact 4-door 5-seater sedan with body dimensions of: length 4662mm, width 1797mm, height 1445mm, wheelbase 2726mm, and a fuel tank capacity of 50 liters. The Mazda3 Axela is equipped with a 1.5L naturally aspirated engine and a 6-speed manual transmission, with a maximum power of 86 kW and a maximum torque of 148 Nm. The drivetrain is front-engine, front-wheel drive, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.