What does a car IV cleanse?

1 Answers
StArianna
07/30/25 12:18am
Car IV cleaning is used to remove carbon deposits in the intake tract. Its advantages include minimal damage to mechanical components, and when using specialized cleaning agents, it is harmless to the vehicle's three-way catalytic system and oxygen sensors. Additionally, it serves as a pre-wash for stubborn carbon deposits in the combustion chamber, resulting in better cleaning effects during subsequent fuel system cleaning. The intake system consists of components such as the air filter, air flow meter, intake pressure sensor, throttle body, auxiliary air valve, idle control valve, resonance chamber, power chamber, and intake manifold. The fuel system typically comprises the fuel pump, fuel filter, and fuel injectors, and its function is to ensure the required fuel flow for the engine under various operating conditions and circumstances.
Was this review help?
13
2
Share
More Forum Discussions

What does the tire size 205/55r16 mean?

The tire size 205/55r16 represents the specification of the tire. The section width of the tire is 205 millimeters, the aspect ratio is 55, 'r' indicates that the tire is a radial tire, and 16 is the rim size, meaning the tire can be mounted on a 16-inch wheel. Tires are circular elastic rubber products assembled on various vehicles or machinery to roll on the ground, usually mounted on metal rims. They support the vehicle body, cushion external impacts, ensure contact with the road surface, and maintain the vehicle's driving performance. Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have high load-bearing capacity, traction performance, and cushioning performance.
1
1
Share

What are the latest speed limit regulations on highways?

The latest speed limit regulations on highways are: 1. The maximum speed on highways must not exceed 120 kilometers per hour, and the minimum speed must not be less than 60 kilometers per hour; 2. Pedestrians, non-motor vehicles, tractors, wheeled special machinery vehicles, articulated buses, full trailers, and other motor vehicles with a design speed of less than 70 kilometers per hour are not allowed to enter highways; 3. The maximum speed for small passenger cars on highways must not exceed 120 kilometers per hour, other motor vehicles must not exceed 100 kilometers per hour, and motorcycles must not exceed 80 kilometers per hour; 4. For roads with two lanes in the same direction, the minimum speed for the left lane is 100 kilometers per hour, and the minimum speed for the middle lane is 90 kilometers per hour. If the speed limit indicated by road signs is inconsistent with the above lane speed regulations, drivers should follow the speed indicated by the road signs.
8
0
Share

Why is tire rotation not recommended after 50,000 kilometers?

After 50,000 kilometers, tire rotation is not recommended because the tire wear pattern has already been established, and performing a rotation may cause the vehicle to pull to one side. However, for models with less stringent alignment specifications, regular tire rotation is still necessary. This is because the vehicle's weight is not evenly distributed across all four tires, and periodic rotation helps maintain even wear across all tires, extending their overall lifespan. The front and rear tires experience different types of friction: the front tires bear more lateral friction, while the rear tires mainly endure longitudinal friction. Additionally, the drive wheels experience greater friction than the non-drive wheels, leading to more severe wear. Therefore, tire rotation is essential to ensure even wear between the front and rear tires, enhancing driving safety.
4
4
Share

How to Match Manual Transmission Gears with Speed?

Manual transmission gear and speed matching method is: 1. Start in 1st gear, when the speed reaches 15 km/h, you can shift to 2nd gear; 2. When the speed reaches 25 km/h, you can shift to 3rd gear; 3. When the speed reaches 35 km/h, you can shift to 4th gear; 4. When the speed reaches 45 km/h, you can shift to 5th gear. You should shift to the appropriate gear according to the speed. Do not drive at low speeds with high gears for extended periods, which is a common mistake made by beginners and will undoubtedly significantly increase fuel consumption. Conversely, driving at high speeds with low gears is also not advisable, as it increases engine load and damages engine lifespan. When shifting gears, you can refer to the engine speed and vehicle speed. Driving at an engine speed close to the peak torque output is more fuel-efficient.
15
3
Share

How to Quickly Register a Vehicle Without a Residence Permit?

Methods for quickly registering a vehicle without a residence permit: Some local police stations may provide a temporary certificate for obtaining a residence permit before the actual permit is issued, which can be used for vehicle registration. It's important to note that not all regions may allow this method for quick registration, so it's advisable to consult the local vehicle management office for specifics. If you plan to purchase a new car, always ensure that all required documents are complete to avoid any delays in registration. For individuals with non-local household registration who start working in a new area, it's recommended to report and register for residence at the local town or street-level migrant population service management agency. Documents required for obtaining a residence permit: 1. Personal resident ID card; 2. Personal photo (residence permit photo receipt) or photo information read from the ID card chip by staff; 3. Residence registration receipt; 4. Proof of local address, employment, or enrollment, among others.
8
3
Share

What does the 'a' on the car mean?

The 'a' on the car refers to the auto-hold function. After turning on this switch, when the vehicle brakes during driving, even if you release the brake pedal, the car will not continue moving. It will only resume driving when the driver presses the accelerator. The features of the auto-hold function include: 1. It prevents the car from rolling during short stops at traffic lights; 2. When starting on an uphill slope, the system automatically applies the brakes to prevent rolling back, and releases the wheels to move forward once you start driving; 3. For some car models, you don't need to pull the handbrake when parking and locking the car, as the system automatically brakes the wheels. Steps to use the auto-hold function: 1. Press the car's brake pedal; 2. Press the car's one-touch start button; 3. The car's dashboard lights up, and the entire vehicle's power is activated; 4. Press the autohold button inside the car to enable the auto-hold mode.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.