What does a car differential lock mean?

Does the Haima S5 have hill start assist?

Haima S5 has hill start assist, which is a function derived from the ESP system. It allows the vehicle to stop and start on a slope without using the handbrake to prevent rollback accidents. The activation conditions for the hill start assist system are: 1. The gear lever is in any position other than P; 2. The accelerator pedal is not pressed; 3. The vehicle is stationary; 4. The parking brake is not engaged. Taking the 2019 Haima S5 as an example, its body structure is a 5-door, 5-seat SUV with body dimensions of: length 4418mm, width 1823mm, height 1630mm, wheelbase 2630mm, front track 1540mm, rear track 1545mm, and curb weight 1380kg.

4

Share

How to adjust the rearview mirror of the Buick Excelle?

Buick Excelle rearview mirror adjustment method: The adjustment button is located on the left instrument panel of the driver. Turn the control knob left or right to select the corresponding side mirror, then push the control knob left, right, up, or down to adjust the mirror. Before driving, adjust the seat position first and then adjust the rearview mirror. The Buick Excelle is a compact sedan produced by SAIC-GM Buick. It features a MacPherson strut front suspension and a multi-link independent rear suspension. In terms of body dimensions, it measures 4609mm in length, 1798mm in width, and 1486mm in height, with a wheelbase of 2640mm. For power, the Buick Excelle is equipped with a 1.3T turbocharged engine paired with a 6-speed automatic transmission.

2

0

Share

Where is the USB port located in the Mercedes-Benz S400L?

The USB port of the Mercedes-Benz S400L is located inside the storage compartment in the front center armrest. Function of the USB port: The in-car USB port not only allows charging of devices like mobile phones through car adapters or cigarette lighters but also facilitates the transmission of audio data. Therefore, the current of the interface in Mercedes-Benz cars is only 5V/0.5A. Voltage of in-car chargers: Due to the lower voltage provided by the car, the in-car charger only requires an overload protection circuit internally. A fuse is designed at the front end of the in-car charger socket. When the current exceeds the capacity of the overload protection circuit, the fuse immediately blows to provide protection.

12

0

Share

How to reset the tire pressure light on Roewe 360?

The method to reset the tire pressure light on Roewe 360 is as follows: 1. Locate and press the instrument information switch button on the multifunction steering wheel; 2. The tire pressure information will then appear on the instrument panel. If the tire pressure is abnormal, the tire pressure warning will also be displayed here. Then, press the RES button on the multifunction steering wheel; 3. Switch to the tire pressure monitoring setup interface and click the reset button to reset the tire pressure monitoring. The Roewe 360 is a compact sedan produced by SAIC Motor. It features a MacPherson strut front suspension and an H-shaped torsion beam rear suspension. The vehicle dimensions are 4579mm in length, 1804mm in width, and 1490mm in height, with a wheelbase of 2660mm.

7

2

Share

Where is the hazard warning flasher located in a Volkswagen?

Volkswagen's hazard warning flasher is located on the center console to the right of the steering wheel. Introduction to Hazard Warning Flasher: The hazard warning flasher, commonly referred to as 'double flash', is a button switch marked with a red triangle containing an exclamation mark (!). It is colloquially known as hazard lights or emergency flashers, serving as a signal to alert other vehicles and pedestrians of special circumstances involving the vehicle. When to Activate Hazard Warning Flasher: If your vehicle breaks down suddenly while driving on the road and cannot be moved to a safe area promptly, you should immediately turn on the hazard warning flasher. This alerts passing vehicles and pedestrians to be cautious, while you should also call for help and wait for assistance.

2

3

Share

What is the minimum ground clearance of a sedan?

The minimum ground clearance of a sedan is between 110 and 150mm. The minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting surface when the car is fully loaded and stationary. It is used to characterize the car's ability to pass over obstacles such as stones and stumps without collision. The greater the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher center of gravity reduces stability. The smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven ground, but the lower center of gravity increases stability. The minimum ground clearance must take into account the passability of loading and unloading platforms during transportation, as well as the possibility that the sedan will not scrape when approaching the edge of a general sidewalk.

4

0

Share

What does a car differential lock mean?

Does the Haima S5 have hill start assist?

How to adjust the rearview mirror of the Buick Excelle?

Where is the USB port located in the Mercedes-Benz S400L?

How to reset the tire pressure light on Roewe 360?

Where is the hazard warning flasher located in a Volkswagen?

What is the minimum ground clearance of a sedan?

Does the cigarette lighter in Lavida still have power after the engine is turned off?

How to Replace the Air Filter of a Passat?

In which country is Renault produced?

Are the wiper and washer motor of the Teana protected by the same fuse?