···
Log in / Register

What does a black smoke vehicle mean?

4 Answers
Fritz
09/04/2025, 04:29 AM

A black smoke vehicle refers to a motor vehicle that emits clearly visible smoke or has a smoke density exceeding Ringelmann Level 1, including both locally and non-locally registered vehicles. Specific information about black smoke vehicles is as follows: 1. Restricted areas: According to documents released by the three cities, black smoke vehicles are prohibited throughout the entire administrative regions of Guangzhou and Jiangmen. Qingyuan City has designated specific restricted routes; 2. Enforcement: The main methods for detecting black smoke vehicles violating the restrictions are on-site testing and electronic monitoring; 3. Penalties: After the policy is officially implemented, vehicles violating the restrictions will be penalized by the traffic management department of the public security authorities, with fines and 3 penalty points recorded.

Was this review help?
17
0
Share
VonAxel
09/16/2025, 10:30 PM

I usually pay attention to environmental issues. When I see a black smoke vehicle, it refers to those cars that emit thick black smoke from their exhaust, typically diesel or old gasoline vehicles caused by incomplete fuel combustion. Black smoke contains a large amount of carbon particles and unburned substances, seriously polluting the air. It not only affects visibility but also exacerbates urban haze and even exceeds emission standards, violating environmental regulations. Nowadays, many cities have surveillance cameras to catch and fine such vehicles. It is recommended that drivers pay attention to their car's exhaust pipes and perform timely maintenance to reduce carbon emissions.

Was this review help?
16
0
Share
Expand All
Marques
10/30/2025, 11:01 PM

I've been driving for over a decade. Once my old SUV emitted black smoke, and I found out it was due to clogged fuel injectors causing incomplete fuel combustion. Nowadays, new car technologies are much better, but older vehicles are prone to this issue if not properly maintained. As a driver, I believe regular oil changes and air filter replacements are crucial. Otherwise, black exhaust smoke isn't just unsightly - it may lead to engine failures that cost much more to repair.

Was this review help?
2
3
Share
Expand All
AuroraDella
12/13/2025, 10:09 PM

When repairing cars, I often hear many car owners complaining about black smoke emissions, which can be caused by various reasons such as aging spark plugs, turbocharger malfunctions, or carbon buildup on the valves. Simply put, it means the fuel isn't burning completely. To address this issue, a step-by-step inspection is necessary—start by checking if the air filter is dirty, then test the cylinder pressure. Using high-quality fuel during regular refueling can help prevent such problems.

Was this review help?
8
2
Share
Expand All
More Forum Discussions

Should I Use High and Low Beams When Overtaking on the Highway at Night?

When overtaking, you should switch from high beams to low beams in advance and turn on the turn signal to inform the vehicle ahead of your position and intention. When the distance to the vehicle ahead is less than 80-100 meters, you should switch back to low beams. Otherwise, the strong glare from your high beams may affect the driver's view through the side and rearview mirrors, compromising their ability to observe the situation behind and indirectly reducing the safety of the overtaking maneuver. Additionally, you can use the high beams of the vehicle ahead to observe the road further ahead. In foggy conditions with visibility less than 200 meters, turn on the fog lights, low beams, marker lights, and front and rear position lights. If visibility drops below 100 meters, activate the fog lights, low beams, marker lights, front and rear position lights, and hazard warning flashers. When visibility is less than 50 meters, turn on the fog lights, low beams, marker lights, front and rear position lights, and hazard warning flashers. Additionally, reduce your speed to no more than 20 kilometers per hour and exit the highway at the nearest available exit as soon as possible. During normal driving at night, use the nighttime running lights and width indicator lights. If there are no vehicles ahead, you may briefly switch to high beams to observe the road and surroundings further ahead, then quickly switch back to low beams.
11
3
Share

What are the symptoms of a faulty car air conditioning temperature sensor?

Car air conditioning temperature sensor failure can cause the air conditioning compressor to malfunction, affecting the air conditioning regulation capability, leading to erratic operation of the air conditioning system. Below is relevant information about automotive air conditioning: 1. Introduction to Automotive Air Conditioning: Automotive air conditioning consists of a compressor, condenser, throttle element, evaporator, fan, and necessary control components, forming an air conditioning system that regulates the temperature and humidity inside the vehicle to provide a comfortable environment for the driver. 2. Working Principle: When the compressor operates, it draws in low-temperature, low-pressure gaseous refrigerant from the evaporator. After compression, the temperature and pressure of the refrigerant increase, and it is sent to the condenser. Inside the condenser, the high-temperature, high-pressure gaseous refrigerant transfers heat to the outside air passing through the condenser, causing it to liquefy and turn into a liquid. The liquid refrigerant flows through the throttle device, where its temperature and pressure decrease, and it enters the evaporator. Inside the evaporator, the low-temperature, low-pressure liquid refrigerant absorbs heat from the inside air passing through the evaporator, causing it to evaporate and turn into a gas. The gas is then drawn into the compressor for the next cycle.
1
3
Share

How to reset the brake pads on a Mercedes-Benz GLC200?

Open the driver's side door. 2. Press the brake pedal to prepare for starting the engine. 3. Press the car's one-key start button to start the engine. 4. The car's dashboard lights up, and the entire vehicle's power is connected. 5. Press the brake pad reset button located next to the gear lever, and the operation is complete. 1. When the brake pads wear down to the warning position [the brake pads are equipped with a metal piece for warning purposes; when the brake pads wear thin, the metal piece produces abnormal noise, indicating the need for replacement. In most cases, simply replacing the new brake pads will reset it. Under normal usage conditions, the replacement cycle for brake pads is usually around fifty to sixty thousand kilometers. In the vast majority of cases, we use whether the brake warning light on the dashboard lights up as the basis for determining whether to replace the brake pads, but this is already the last line of defense. Although all vehicles basically have such a warning system, some directly sense the thickness of the brake pads, while others only light up the warning light when the brake pads are completely worn out and the brake fluid is extremely low. Therefore, during every maintenance visit, it is essential to check whether the brake pads are still usable and replace those nearing the end of their lifespan in advance, rather than solely relying on the warning light.
20
4
Share

How to set the automatic downward tilt of the rearview mirror when reversing in Haval M6?

Start the car, shift into reverse gear, adjust the downward tilt angle of the right rearview mirror, then press the SET button on the seat memory. A sound will indicate successful setup. When the vehicle is in reverse gear, the right rearview mirror will automatically adjust its angle downward to help the driver see the ground. The mirror automatically adjusts during reversing to improve visibility and resets when driving forward, which is a very user-friendly design. To set the memory, shift into reverse gear and hold the seat memory button on the driver's left side until you hear a sound, indicating successful memory. Only the right rearview mirror has this function. Press the right button on the rearview mirror, and it will automatically tilt down during reversing. For the left mirror adjustment, turn to R, and the right mirror will automatically tilt down. First shift into reverse gear, adjust the right mirror to the desired position, then exit reverse gear. The rearview mirror is a tool that allows the driver to directly obtain external information about the rear, sides, and below the car while seated in the driver's seat. For the convenience of the driver and to prevent traffic safety accidents and ensure personal safety, all countries require cars to be equipped with rearview mirrors, and all mirrors must be adjustable.
8
0
Share

What does 'lim' mean on the car dashboard?

The 'lim' on a car indicates that the speed limit function is activated. When the vehicle is stationary, pressing it once will default the speed limit to 30. While driving, pressing it once will record the current speed as the trigger point for the speed limit. There are two methods to activate it: 1. When the vehicle is stationary, pressing it once will default the speed limit to 30. 2. While driving, pressing it once will record the current speed as the trigger point for the speed limit. For example, when driving on a road with a speed limit of 60, pressing it once when the speed is between 58-65 will set the limit. If the vehicle speed exceeds this value, a warning will appear on the dashboard. Pressing LIM once more will deactivate the function.
12
3
Share

What are the items tested in the small road driving test?

Subject 2, also known as the small road driving test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test. The test items include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve. The following is supplementary information: According to Article 25 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Ministry of Public Security Order No. 123), the content of the Subject 2 test includes: for large buses, tractors, city buses, medium-sized buses, and large trucks, the test items are pile driving, stopping and starting on a slope, parallel parking, passing a single-plank bridge, driving on a curve, turning at a right angle, passing a width-limited gate, passing continuous obstacles, driving on undulating roads, making a U-turn on a narrow road, as well as simulating highway driving, continuous sharp turns on mountain roads, tunnels, rain (fog) conditions, slippery roads, and emergency handling; for small cars, small automatic transmission cars, small automatic transmission cars specially designed for the disabled, and low-speed trucks, the test items are reversing into a garage, stopping and starting on a slope, parallel parking, driving on a curve, and turning at a right angle.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.