What does a bare used car mean?

1 Answers
LaJessica
07/30/25 5:45am
Bare used cars refer to vehicles that cannot be transferred. Here are the specific details about bare used cars: 1. No documentation: This includes cases where the documents are lost and cannot be reissued for various reasons, the vehicle has been overdue for inspection for too long and can no longer be inspected, or the vehicle's identification has been damaged due to accidents and cannot be reissued. Additionally, stolen vehicles and smuggled vehicles are also referred to as bare cars. 2. Used cars: These are motor vehicles that have been registered with the public security traffic management authorities, have not yet reached the national scrapping standards or are still within their economic service life, and can continue to be used.
Was this review help?
10
0
Share
More Forum Discussions

Must the ETC device be attached to the windshield?

ETC can be used without being attached to the windshield. Installing the ETC on the upper part of the windshield is to minimize obstruction of the driver's view and to ensure better recognition by the equipment at highway toll stations. If you prefer not to install it on the windshield, place it in an open area where it can still be seen through the windshield. For small cars, the ETC is generally installed in the upper middle part of the front windshield, while for large vehicles like trucks and buses, it is installed in the lower middle part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 and 90 degrees. For vehicles with factory-installed or aftermarket anti-explosion films, which may affect microwave signal transmission, the ETC should be installed in the microwave window area. Here are some installation considerations for ETC: Do not obstruct the view; installing it behind the rearview mirror is ideal: Many car models have windshields with a significant backward tilt, which can reduce the driver's field of vision. Installing the ETC without considering this may increase blind spots. Installing it behind the rearview mirror on the right side can help avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a built-in solar panel for self-charging. Therefore, avoid installing it on the blackened areas of the windshield or in positions that may block the solar panel. Do not remove it arbitrarily once installed: The button in the middle of the adhesive is an anti-tamper lever connected to a switch. Once the ETC is installed, the windshield will press the lever in. If removed arbitrarily, the lever will pop out, triggering the switch and locking the electronic tag, rendering it unusable. You will then need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To avoid issues caused by a malfunctioning ETC device in the vehicle ahead, maintain a distance of at least 10 meters to prevent automatic payment for the preceding vehicle. The ETC lane recognizes vehicles at speeds up to 20 km/h; exceeding this speed may result in failed transactions due to inability to read the device. If using a debit card linked to ETC, insufficient balance may also cause transaction failures.
20
2
Share

What is the ground clearance of the Baojun RS5?

The ground clearance of the Baojun RS5 is approximately 200mm. Concept of Ground Clearance: Ground clearance refers to the distance between the ground and the rigid parts at the bottom of the vehicle. The ground clearance of a vehicle varies depending on whether it is unloaded or loaded. Ground clearance is categorized into two scenarios: unloaded and fully loaded. The ground clearance when fully loaded is also known as the minimum ground clearance, which refers to the shortest distance between the lowest protruding part of the vehicle's chassis and the ground when the vehicle is parked on a level surface under the rated full load condition. Characteristics of Ground Clearance: Ground clearance is related to the vehicle's load; the heavier the load, the smaller the ground clearance. Vehicles with lower ground clearance have a lower center of gravity but poorer off-road capability. Vehicles with higher ground clearance have better off-road capability. Besides performing well on gravel and mountain roads, higher ground clearance also helps prevent water from entering the exhaust pipe when driving through flooded roads and makes it easier to park on curbs or other parking spaces with height differences.
15
0
Share

Is Chery Really More Fuel-Efficient Than Joint Venture Cars?

Chery is not necessarily more fuel-efficient than joint venture cars. A car's fuel consumption is determined by multiple factors, such as driver operation, road conditions, and the vehicle itself. Factors affecting fuel consumption: There are many factors that affect a car's fuel consumption, including driving habits, road conditions, vehicle load, tire pressure, and more. Additionally, the car's exterior design also impacts fuel consumption—the lower the drag coefficient, the lower the fuel consumption. Direct factors influencing fuel consumption: The true determinant of a vehicle's fuel consumption is how many strokes the engine completes within a specified time and distance. Strokes refer to the engine's RPM. Therefore, only when both displacement and RPM are low will the car's fuel consumption be lower, as these factors are interrelated.
17
4
Share

What are the dimensions of the Jetta Partner?

Jetta Partner dimensions: 4415X1674X1415mm. Wheelbase (mm): 2471. Exterior design: The headlights are paired with currently popular black base frames, a refined and elegant chrome grille, and the design of the front and rear bumpers integrates seamlessly with the Jetta's simple and robust body, making the connection between the front end, fenders, and side profile more perfect. In terms of interior design, avant-garde, fashionable, and innovative elements are incorporated, forming a unified interior style with other configurations in the car, which is both comfortable and aesthetically pleasing. In terms of vehicle dimensions, the interior space is more spacious, providing a more comfortable ride, better meeting the needs of Chinese consumers for a dual-purpose family and business sedan. 1.4L EA211 engine: The new Jetta 1.4L model is equipped with the 1.4L EA211 engine, which reaches its maximum power output of 66kW at 5500 rpm and its maximum torque of 132Nm at 3800 rpm. The small-displacement engine not only brings users lower operating costs but also achieves energy savings and environmental protection.
13
0
Share

Are there many problems with the Song Pro?

There are not many problems with the Song Pro. The engine and transmission technology currently configured in the Song Pro are quite mature, so there is no need to worry about any issues. Introduction: The dry dual-clutch can be understood as a combination of two sets of ordinary manual transmission clutches, with two clutches controlling two input shafts to transmit power to the gearbox. Since this design aims to improve shifting speed and transmission efficiency, the dual-clutch transmission is always highly responsive to gear changes. Frequent shifting equals frequent semi-engagement of the clutch, which means high-frequency sliding friction between the flywheel and the clutch. This poses a severe test to the clutch's durability. Durability: The peak torque of the 1.5T direct-injection turbocharged engine matched with the Song Pro is only 245Nm (1600-4000 rpm), and the ample torque margin indicates the durability of this transmission. Features: The BYD Song Pro fuel version comes standard with a 1.5T high-efficiency engine, model BYD476ZQB, and a wet transmission that places the clutch in an oil chamber for lubrication and cooling through transmission oil flow.
10
4
Share

Where is the fuel pump fuse relay of Volkswagen Lavida located?

After opening the driver's door, there is a panel on the side of the dashboard. Unscrew the panel with a screwdriver, and the fuse box is inside; the relay is located in the relay box. Relay Overview: A relay is an automatic control device where the output undergoes a sudden change when the input (electrical, magnetic, acoustic, optical, or thermal) reaches a certain value. Automotive relays are the relays used in vehicles. Relay Characteristics: Automotive relays have high load-switching capacity, impact resistance, and vibration resistance. The power supply in vehicles is mostly 12V, and the coil voltage is mostly designed for 12V. In the engine compartment, the ambient temperature range requirement is -40°C to 125°C, while in other locations, it ranges from -40°C to 85°C.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.