What does a bare used car mean?

1 Answers
DiStephanie
07/29/25 9:40am
Bare used cars refer to vehicles that cannot be transferred to a new owner. Here is a detailed introduction to bare used cars: No documentation: This includes situations where the documents are lost and cannot be reissued for various reasons, the vehicle has missed inspections for too long and can no longer be inspected, or the vehicle's identification marks are damaged due to accidents and cannot be reissued. Some stolen or smuggled vehicles are also referred to as bare cars. Used cars: These are motor vehicles registered with the public security traffic management authorities that are still in service before reaching the national scrapping standards or within their economic service life and can still be used. Precautions: When buying a used car, you should carefully observe the vehicle's manufacturing date, actual mileage, whether it has been involved in any major accidents, and whether the previous owner maintained the vehicle properly, among other aspects.
Was this review help?
10
0
Share
More Forum Discussions

How to Install the Safety Seat Interface in a BMW 5 Series?

The BMW 5 Series child safety seat interface includes both LATCH and ISOFIX interfaces. The LATCH interface in the BMW 5 Series relies on three hooks for fixation, which are attached to three corresponding points, making installation very convenient. Relevant details are as follows: 1. High Strength: Although the ISOFIX interface in the BMW 5 Series has only two connection points, it uses rigid buckles for hard-link fixation, significantly enhancing reliability and connection strength. 2. Quick Installation: It is also very convenient to install; simply align and insert it into the reserved slots on the seat, and the job is done. Child seats using this interface are slightly more expensive. Due to the hard-link design, the child seat and the car body are integrated as one.
19
1
Share

How many days does it take to be notified after making a U-turn on the highway?

It takes 3 to 7 days for a traffic violation involving driving in the wrong direction to be recorded, as the traffic police team needs to input and verify the information, with the latest notification not exceeding 13 working days. Relevant penalties: According to Article 90 of the 'Road Traffic Safety Law of the People's Republic of China,' if a motor vehicle driver violates the road traffic safety laws and regulations regarding road traffic rules, they shall be given a warning or fined. Therefore, reversing, driving in the wrong direction, or making a U-turn on the highway will result in a warning or a fine. In accordance with the relevant provisions of the 'Road Traffic Safety Law of the People's Republic of China,' reversing, driving in the wrong direction, or making a U-turn on the highway not only incurs a fine but also results in a full 12-point deduction from the driver's license. Corrective measures for wrong-way driving: Continue driving to the nearest exit or service area. Near the exit toll booth, there is usually a designated exit for drivers who have gone the wrong way to make a U-turn. You can return to the highway at this point and find the correct lane via the signage. If you see a service area, most service areas have a symmetrical layout with a connecting tunnel in the middle. Driving through this tunnel allows you to enter the opposite service area. This method can save you from paying extra highway tolls for the additional distance traveled, as long as the car remains within the highway's internal circulation loop, the round trip will not be counted for toll purposes.
9
3
Share

How to Use the Wireless Charging in Haval F7?

To use the wireless charging in Haval F7, follow these steps: switch the ignition to ON mode or start the vehicle; press the charging button to activate the wireless charging function for mobile electronic devices; place the mobile electronic device on the charging area to begin charging. Below is more information about the Haval F7: 1. Introduction: The Haval F7 is the flagship model of the Haval F series, an AI intelligent connected SUV. The new car is available in two versions: 1.5GDIT and 2.0GDIT, with a total of 6 models. 2. Six all-terrain driving modes: (1) Standard. (2) Sport. (3) Economy. (4) Mud. (5) Sand. (6) Snow mode.
19
5
Share

What is the tire size specification of the Sportage?

The original tire configuration model of the Sportage is 225/60R17. The first number 225 represents the tire width of 225MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width. The letter R stands for radial tire, and 17 represents the rim diameter of 17 inches. The Sportage has a maximum speed of 186km/h and a fuel consumption of 6.3L per 100km. In addition to the model, the tire also carries the following commonly used data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed rating of the tire from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as 'Standard Rim 5.00F'.
16
2
Share

What are the two methods of using calipers?

The caliper has two usage methods: the caliper measurement method and the method of taking dimensions on a steel ruler. Below is relevant information about calipers: 1. Introduction: A caliper is a tool for measuring length, divided into non-dial calipers and dial calipers. External calipers are used to measure the outer diameter of a cylinder or the length of an object, while internal calipers are used to measure the inner diameter of a cylindrical hole or the width of a groove. 2. Method of taking dimensions on a steel ruler with calipers: For external calipers, one measuring face of a caliper leg rests against the end face of the steel ruler, while the measuring face of the other leg aligns with the desired dimension marking. The line connecting the two measuring faces should be parallel to the steel ruler. When using internal calipers, the method of taking dimensions is the same as with external calipers, except that the end face of the steel ruler must rest against an auxiliary plane, and one leg of the internal caliper must also rest against this plane.
2
0
Share

What size tires can be fitted on 17-inch rims?

17-inch rims can accommodate 17-inch tires. Here are the relevant details: 1. Aspect ratio: The larger the rim size, the higher the aspect ratio of the tire, which improves the vehicle's handling stability. However, this also comes with some drawbacks, such as increased contact area between the tire and the ground, leading to greater driving resistance and higher fuel consumption. 2. Safety: To ensure driving safety, each type of tire must be used with the appropriate rim. This information can usually be found in the tire tread manual. Tires are designed to be used with rims that have a similar width, and there is a specific range of applicability.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.