···
Log in / Register

What Does a 3-Year or 100,000-Kilometer Warranty Mean?

2 Answers
VonMaximus
07/29/25 9:31am
3-year or 100,000-kilometer warranty means that when the vehicle has been used for less than 3 years or has traveled less than 100,000 kilometers, warranty services will be provided. Below is a detailed introduction about car warranties: Meaning of car warranty period: The car warranty period refers to the time frame during which the car manufacturer promises to provide free repairs and maintenance for faults caused by quality issues when selling the product to consumers. How to determine if the car is within the warranty period: The warranty period is divided into two aspects: time limit and mileage limit. When either of these two conditions is met, it means the vehicle's warranty period has expired. Precautions: The warranty has certain limitations and does not include maintenance items such as engine oil and spark plugs.
Was this review help?
2
2
Share
WestonLee
08/12/25 10:19am
A 3-year or 100,000-kilometer warranty, from my experience, means that the manufacturer will cover the cost of repairing certain key components, such as the engine or transmission, for free within the first three years after you buy the car or before the car reaches 100,000 kilometers, whichever comes first. This doesn’t cover everything—only defects caused by the manufacturer’s design flaws, like faulty parts or improper assembly. If you crash the car or neglect regular maintenance, you’ll have to pay out of pocket. I find it particularly useful, especially in the first few years of owning a new car, as it eliminates worries about major repair costs and can extend the vehicle’s lifespan. Just remember to stick to scheduled maintenance for the warranty to remain valid—otherwise, it might be voided. If you drive a lot, the mileage limit may be reached quickly; if you drive less, the time limit applies. The balanced design is quite reasonable, so prioritizing this feature when choosing a car is a smart and reassuring move.
Was this review help?
5
0
Share
Expand All
More Forum Discussions

What is the first maintenance mileage for Honda 190TR?

Honda 190TR's first maintenance is at 1000 kilometers. First maintenance includes: Changing engine oil and oil filter, checking all vehicle lights, fluid levels, electrical system functions, tire inspection and pressure adjustment, inspecting chassis components for normal condition, checking for oil leaks in engine and transmission, and ensuring proper operation. A professional diagnostic device will be used for a computer scan of the entire vehicle, and the maintenance reminder will be reset. First maintenance mileage: Different brand models may have varying requirements, but most require the first maintenance between 3000 to 5000 kilometers. Some brand models may require the first maintenance at around 8000 to 10000 kilometers.
16
0
Share

What are the differences between YueDong 75 and 70?

YueDong 75 and 70 differ in clarity, heat insulation effect, and price. Clarity: YueDong 70 and 75 have 71% and 75% visible light transmittance respectively. YueDong 75 has the highest visible light transmittance, meaning it provides the clearest vision. Therefore, in terms of clarity, YueDong 75 is better than 70. Heat insulation effect: YueDong 70 has a total solar energy rejection rate of 45%, higher than YueDong 75's 33%. In terms of heat insulation performance, YueDong 70 is better than 75. Of course, the price of YueDong 70 is also higher than that of 75. Price advantage: It must be said that YueDong 75 has a significant price advantage. The full car price of YueDong 75 is around 1100 yuan, which is much cheaper than YueDong 70's 1880 yuan. Therefore, in terms of price, YueDong 75 has an advantage over YueDong 70.
7
1
Share

Why does Volkswagen's parking brake and ABS fail?

Reasons for Volkswagen parking brake and ABS failure: Wheel speed sensor, ABS wiring, ABS pressure regulating solenoid valve, ABS computer failure; insufficient brake fluid; dirty ABS sensor. The method to eliminate the ABS warning light is to unplug the ABS power supply in the engine compartment. Function of ABS: Maximize the effectiveness of the brakes, shorten braking time and distance. Effectively prevent vehicle skidding and fishtailing during emergency braking, ensuring good driving stability. Allow steering during emergency braking, providing good steering maneuverability. Avoid severe friction between tires and the ground, reducing tire wear. Working principle of ABS: During braking, ABS quickly determines the wheel lock-up state based on speed signals from each wheel speed sensor, closes the normally open input solenoid valve on the wheel that is starting to lock, keeping the braking force unchanged. If the wheel continues to lock, the normally closed output solenoid valve is opened, causing the brake pressure on that wheel to rapidly decrease due to the direct connection to the brake fluid reservoir, preventing complete wheel lock-up from excessive braking force. This keeps the braking state always at the optimal point (slip rate S of 20%), achieving the best braking effect and the highest driving safety.
19
2
Share

Why is the daytime running light of Baojun 560 not working?

The reasons why the daytime running light of Baojun 560 is not working include a blown fuse or a burnt-out bulb. Check if the fuse is blown: Use a screwdriver to connect the hot wire of the dimmer switch to the high beam and low beam terminals respectively, and observe the following scenarios: If all lights turn on, it indicates a fault in the dimmer switch. If the high beam works but the low beam does not when connected, the fault lies between the dimmer switch and the headlight or the low beam. If the high beam of the headlight does not work, check if the high beam indicator light is on. If it is, the fault is between the terminal block and the headlight; if not, the fault is between the terminal block and the dimmer switch. If only one headlight works while the other does not, it may be due to a burnt-out filament, an open circuit, or poor grounding (dim headlight). Check if the bulb is burnt out: The voltage regulator may be faulty, causing excessively high voltage. Poor contact in the battery cables can lead to excessively high no-load voltage from the generator. There may be a short circuit between the generator armature and the field coil.
3
4
Share

What transmission does the Mercedes-Benz E-Class use?

The Mercedes-Benz E-Class uses a 9-speed automatic transmission with manual mode. Introduction to transmissions: A transmission consists of a gear transmission mechanism and a control mechanism. It has evolved from manual transmissions in the past to continuously variable transmissions (CVT) today, enabling the engine to achieve lower fuel consumption while operating at higher power outputs. The transmission can alter the vehicle's rotational speed and expand the driving wheel's torque and rotation speed. Classification of transmissions: Automatic transmissions have become mainstream internationally, primarily including AT, AMT, CVT, and DCT types. Early AT transmission systems mainly used 4-speed configurations. AT transmissions achieve gear shifting through electronically controlled automatic operating systems. CVT is a true continuously variable transmission with fewer components and a compact size. DCT features dual clutches.
10
2
Share

Why does the Volkswagen CC make noise when accelerating?

There are several reasons why a Volkswagen CC may produce noise when accelerating, including loose fasteners, deformation or damage of certain components, improper assembly adjustment or repair, and excessive clearance between parts. Loose fasteners: Vibration during engine operation can cause certain parts to become loose, resulting in impact sounds. For example, loose flywheel mounting bolts or connecting rod bolts can cause abnormal noises. Deformation or damage of certain components: Abnormal noises can be caused by deformation or damage of certain parts. For example, a bent connecting rod can lead to piston slap, and broken valve springs or a fractured crankshaft can also cause unusual sounds. Improper assembly adjustment or repair: Incorrect assembly adjustment or repair can lead to improper clearance between components. For instance, overly tight piston pin assembly or improperly adjusted valve clearance can result in abnormal noises. Excessive clearance between parts: Clearance between parts is an important indicator of automotive assembly quality. When lubrication, temperature, load, and speed are constant, abnormal noises become more pronounced as the clearance increases. Natural wear of certain moving engine components can cause the clearance to exceed the acceptable range, leading to noises such as piston slap against the cylinder wall or impact sounds between connecting rod bearings and journal.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.