What does 970cc displacement mean?

1 Answers
VonTanner
07/30/25 12:49am
Automobile engine power is generally labeled in kilowatts (kW), where 34.7 means 34.7 kW. A displacement of 970 refers to a cylinder volume of 970cc, which is 0.97 liters, and is often roughly categorized as a 1.0-liter displacement. Different maximum speeds: The difference in displacement results in varying maximum speeds that vehicles can achieve, as well as their performance when fully loaded and driving on a good level surface. Different acceleration capabilities: Different displacements lead to variations in acceleration time, acceleration performance, and acceleration distance. Different climbing abilities: When facing the maximum gradient during driving, different displacements provide varying climbing capabilities. Different fuel economies: Vehicles with different displacement sizes offer varying fuel economies. The size of the displacement can also reflect the carrying capacity related to fuel consumption. Under the same technical level and objective conditions, a larger displacement consumes more fuel.
Was this review help?
16
5
Share
More Forum Discussions

What are the reasons for water ingress in the Passat Lingyu cabin floor mats?

Passat Lingyu cabin floor mats water ingress reasons are as follows: 1. Reason one: It may be caused by leakage from the drainage plug at the bottom of the compartment, leakage from the sunroof drainage pipe, door leakage, leakage of antifreeze from the heater core, damage or improper installation of the air conditioning drainage pipe, etc. Open the engine compartment (front cover), remove the battery, and you can see the drainage hole. Remove the funnel-shaped rubber pad of the drainage hole with a screwdriver. 2. Reason two: There are also multiple possibilities, one is sunroof leakage due to poor sealing, check the sunroof; the second is water from car washing that was not cleaned properly; the third is rusting of the car's small water tank, which is used for cabin heating, leading to leakage. Remove the soaked comfort control module, blow it with an air pump, and use a towel to absorb the water from the cabin floor.
11
0
Share

Which car brand has a lion logo?

The car with a lion logo is Dongfeng Peugeot. Its models include: Peugeot 408, Peugeot 307, Peugeot 207, Peugeot 301, Peugeot 206, etc. Taking the 2020 Peugeot 408 as an example, its body structure is a 4-door 5-seater sedan with dimensions of: length 4750mm, width 1820mm, height 1488mm, wheelbase 2730mm, fuel tank capacity 53l, and trunk capacity 455l. The 2020 Peugeot 408 is equipped with a 1.2l turbocharged engine, with a maximum horsepower of 136ps, maximum power of 100kw, maximum torque of 230nm, and is paired with a 6-speed dual-clutch transmission.
8
5
Share

Where is the right B-pillar?

Automobile B-pillar is located between the front and rear seats of the cockpit, which is the vertical bar between the two doors on both sides, extending from the roof to the bottom of the car. From the inside, the seat belt is on the B-pillar. Definition of B-pillar: The B-pillar, also known as the center pillar, is located between the front and rear seats of the cockpit. It bears the pressure from the roof and the front and rear doors. In addition, some additional parts, such as the front seat belts, are installed inside the B-pillar. Therefore, to better achieve force transmission, the B-pillar often protrudes outward. The contradiction of the center pillar lies in achieving a balance between stiffness and weight. A and C pillars: The A-pillar, B-pillar, and C-pillar are the main parts supporting the structural strength of the vehicle. The A-pillar of a car is the pillar connecting the roof and the body on the left front and right front of the driver; the C-pillar is the pillar connecting the roof and the body on the far right and left sides of the rear seats.
15
5
Share

Do I have to repair the car immediately after filing an insurance claim?

Filing an insurance claim does not necessarily mean you have to repair the car immediately. There is no time limit, and you can consult local repair shops for the repair time after the damage assessment. When repairing the car, check whether it is within the warranty period: If the vehicle is within the warranty period of a 4S shop, have it repaired at the 4S shop to ensure you can enjoy the warranty policy. If the vehicle is out of warranty, go to auto repair centers or similar places, which are cheaper than 4S shops with lower labor costs. Negotiate the price before repair: 4S shops have fixed prices with no room for negotiation, while other repair shops allow price discussions. Before the repair, clarify the parts to be repaired and the labor costs to avoid additional charges midway.
4
2
Share

How Many Seats Can a B1 License Drive for Passenger Vehicles?

B1 A B1 driver's license allows driving passenger vehicles with more than 8 seats but fewer than 19 seats. According to the "Road Traffic Safety Law of the People's Republic of China," in China, passenger vehicles with more than 8 seats and fewer than 19 seats are classified as medium-sized buses. Small cars refer to vehicles with a total mass of 4.5 tons (inclusive), seating capacity (excluding the driver) of 9 people (exclusive), or a vehicle length of less than 6 meters (exclusive). The following circumstances disqualify an applicant from applying to add a tractor (B1) driving category: 1. Causing a traffic accident resulting in death and bearing full or primary responsibility; 2. Driving under the influence of alcohol; 3. Having a history of driving under the influence of alcohol during the current scoring cycle and the three consecutive scoring cycles prior to application; 4. During the current scoring cycle and the three consecutive scoring cycles prior to application, driving a motor vehicle at speeds exceeding 50% of the speed limit without having the motor vehicle driver's license revoked.
6
0
Share

What is the size of a 50cc motorcycle engine displacement?

50cc motorcycles, commonly referred to as 50cc bikes, are similar to 125cc or 250cc motorcycles. The 50cc designation refers to the engine displacement, which means the cylinder volume is 50 cubic centimeters (50CC, 50ml, or 50cm³). All these terms represent the same thing: an engine displacement of 50 milliliters. Engine displacement calculation formula: Displacement equals pi multiplied by the square of the radius multiplied by height (3.1416159) multiplied by piston radius (in mm) multiplied by piston radius (in mm) multiplied by stroke (in mm) multiplied by the number of cylinders. Differences in displacement size: Larger displacement engines require higher manufacturing precision and can output greater power. Simply put, vehicles with higher power outputs are generally faster (assuming equal weight). Within the same vehicle series, models with larger displacements typically come with higher-end configurations.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.