What does 95h on a tire mean?

1 Answers
RicardoMarie
07/29/25 1:07pm
Tire 95h refers to the load index, which corresponds to a load capacity of 690kg. When replacing tires, the specifications must comply with the vehicle manufacturer's requirements and recommendations. This means the load index of the replacement tire must be equal to or greater than that of the original tire, and the speed rating of the replacement tire must also be equal to or higher than that of the original tire. Tires often operate under complex and demanding conditions, enduring various deformations, loads, forces, and extreme temperatures during use. Therefore, they must possess high load-bearing performance, traction performance, and cushioning performance. Based on their application, tires can be categorized into: passenger car tires, light truck tires, construction machinery tires, off-road vehicle tires, and agricultural and forestry machinery tires.
Was this review help?
12
2
Share
More Forum Discussions

What is the range of the Roewe MARVEL X?

The range of the Roewe MARVEL X is 370 to 403 kilometers. The Roewe MARVEL X is a new energy vehicle launched by Roewe, which comes in two versions: a two-wheel-drive version and a four-wheel-drive version, equipped with either dual-motor or triple-motor configurations. The dual-motor version features motors with maximum power outputs of 85 kW and 52 kW, and a maximum torque of 410 Nm, while the triple-motor version has a maximum power output of 85 kW. The Roewe MARVEL X measures 4678 mm in length, 1919 mm in width, and 1616 mm in height, with a wheelbase of 2800 mm.
19
2
Share

Is the service life of private cars 15 years?

Private cars are not scrapped after 15 years. There is no mandatory retirement age for private sedans, including 5-seat family cars and 7-seat SUVs, as well as non-commercial small and mini vehicles. When the normal mileage reaches 600,000 kilometers, the state will guide the retirement. In addition to the above vehicles, small and mini non-commercial passenger vehicles, large non-commercial sedans, and wheeled special machinery vehicles also have no service life limit. Motor vehicle retirement process: 1. The owner of the vehicle applying for retirement and renewal should fill out an "Application Form for Motor Vehicle Modification, Transfer, Alteration, Suspension, or Retirement" and affix the owner's seal. 2. Apply at the registration and acceptance counter. For vehicles that have reached the retirement age, a "Vehicle Retirement Notice" will be issued. For vehicles that have not reached the retirement age, if they are confirmed by the motor vehicle inspection counter to meet the retirement standards, a "Vehicle Retirement Notice" will be issued. 3. The owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". 4. The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. 5. The owner should submit the "Modification Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Recycling Certificate of Retired Vehicles", and photos of the dismantled vehicle to the motor vehicle inspection counter for verification and signature. The license plates and certificates will be reclaimed, and the retirement registration will be processed according to regulations after approval.
4
5
Share

Do motorcycles have front and rear brakes?

Motorcycles have front and rear brakes. Locations of motorcycle brakes: The front brake of a motorcycle is always on the right handlebar. The position of the rear brake depends on the specific model. For cross bikes and underbone bikes, the rear brake is operated by the right foot. For scooters, if it's a handle-type rear brake, it's located on the left handle; if it's a foot-type rear brake, it's on the footboard and controlled by the right foot. Methods of using motorcycle brakes: At high speeds, the braking force on the front wheel must be greater than that on the rear wheel. However, the front wheel must not be locked when braking at high speeds. When braking uphill, the braking force on the front wheel can be appropriately increased. When braking downhill, the braking force on the rear wheel can be appropriately increased.
12
3
Share

Where is the cabin air filter located in Hyundai Verna?

Hyundai Verna's cabin air filter is located behind the glove box. The cabin air filter prevents dust and other pollutants from entering the vehicle through the heating and air conditioning system from outside. If dust or other pollutants accumulate in the filter for an extended period, the airflow through the vents decreases, causing moisture to build up on the inside of the windshield even when the fresh air mode is selected. The replacement method for the Hyundai Verna cabin air filter is as follows: 1. Open the glove box and remove the stoppers on both sides; 2. Pull out the cabin air filter cover and remove the filter; 3. Replace the cabin air filter; 4. Reassemble in the reverse order of disassembly.
1
0
Share

What kind of oil should be added to a small air pump?

Small air pumps use engine oil. Composition of engine oil: Engine oil consists of base oil and additives. Base oil is the main component of lubricating oil, determining its fundamental properties. Additives can compensate for and improve the shortcomings of base oil performance, while also providing certain new characteristics, making them an important part of lubricating oil. Importance of engine oil: The condition of engine oil not only directly affects the working state of the engine but also influences its lifespan. The working environment of engine oil is extremely harsh, with impurities produced by gasoline combustion contaminating the oil. Over time, the oil will oxidize and deteriorate.
15
5
Share

Are the operations of Tiptronic and dual-clutch the same?

Tiptronic and dual-clutch operations are not the same. Here are the differences: Differences in usage: The function of a "dual-clutch" is to eliminate the power transmission stagnation phenomenon during gear shifting and clutch engagement, commonly used in sports cars. "Tiptronic" combines manual and automatic gear shifting into one transmission method. This means you can either just press the accelerator for automatic gear shifting or manually change gears. Differences in fuel efficiency: A dual-clutch consists of two automatic transmission clutches, making it more fuel-efficient. Tiptronic, on the other hand, has a manual transmission clutch on one side and an automatic transmission clutch on the other, leaning more towards automatic transmission, resulting in inferior fuel efficiency compared to dual-clutch.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.