What does 95h on a tire mean?

1 Answers
LeJackson
07/29/25 7:07am
Tire 95h indicates the speed rating and load index of the tire, where 95 refers to a load capacity of 690 kilograms, and h represents a speed rating of 210 kilometers per hour. In daily use, attention should be paid to tire pressure, uneven wear, and impacts. Tire pressure must be checked regularly. The effects of overinflated tires are: 1. Reduced comfort, with more severe wear in the center of the tire; 2. Weakened grip and oversteering. The effects of underinflated tires are: 1. Increased risk of blowouts during prolonged driving; 2. Reduced comfort and increased tire noise; 3. More wear on both sides of the tire, weakened grip, and understeering.
Was this review help?
6
0
Share
More Forum Discussions

What Does Subaru Mean?

Subaru is the Japanese name for the Pleiades star cluster, and the company's logo features the six-star cluster, which is also the emblem of Subaru automobiles. Introduction to Subaru Corporation: Subaru is a division of Fuji Heavy Industries (FHI) specializing in automobile manufacturing. Established in 1953, it initially focused on producing cars, aircraft, and various engines. It is a manufacturer of diverse and multi-purpose transportation equipment. The logo of Fuji Heavy Industries' Subaru vehicles adopts the six-star cluster design. Introduction to Subaru Vehicles: Subaru vehicles are known for their unique technologies, particularly the horizontally opposed engine and full-time all-wheel-drive system. Subaru achieved remarkable success, with global sales reaching a historic record in 2006. Fuji Heavy Industries has continuously developed distinctive all-wheel-drive systems and high-performance horizontally opposed engines. Subaru vehicles are renowned for their excellent handling and engine performance.
1
5
Share

How to Solve the Yellow Engine Light on the Dashboard?

Solution for the yellow engine light on the dashboard: After the engine fault light comes on, you need to go to a 4S shop or repair shop to use a diagnostic computer to read the fault code to help the technician determine the cause of the fault. Reasons for the yellow engine light on the dashboard: 1. Failure in the intake system: If the intake system is blocked or leaking, the engine fault light may come on; 2. Serious mechanical failure in the engine itself: If the engine timing is incorrect, it may cause engine failure; 3. Failure in the ignition system: The ignition system includes spark plugs and ignition coils. If the spark plugs or ignition coils fail, it may cause a certain cylinder of the engine to stop working, and the engine fault light will also come on; 4. Sensor failure: If the engine fault light comes on, it may be due to a failure in one of the oxygen sensor, air flow sensor, or knock sensor.
20
3
Share

What level does LLumar Enjoy belong to?

LLumar Enjoy belongs to the mid-range level. Brief introduction of LLumar: AVS70 is a metallic film with a heat insulation rate of up to 58%, even higher than V-KOOL V70, delivering excellent performance. AIR80 has high light transmission with a sky-blue color and good heat insulation. Commonly used side window films: LATI35/15 features a diamond-like ceramic structure, ensuring stability and comes with a lifetime warranty. PP35 has a natural color with slight reflective effects, providing clear outward visibility and heat insulation. CTX30/40/50 from the Enjoy series utilizes advanced coated film technology with low visible light reflectivity, ensuring safe and enjoyable driving.
20
2
Share

What does the AC button in the car mean?

The AC button in the car is the abbreviation of the air conditioning device. Pressing the AC button will start the air conditioning to adjust the temperature according to the set temperature, while turning it off will only activate the air blower part, adjusting the mechanism. When the AC button in the car is turned on, the compressor inside the car will start working. The AC button in the car also has a small function, which is to defog the windows. When the air humidity is relatively high, entering the car will make you feel very damp. At this time, pressing the button and blowing air for a while will remove a lot of the moisture, thereby achieving the function of defogging the windows. In AC mode, since the car's air conditioning compressor is always in working condition, it will inevitably lead to an increase in fuel consumption and engine load. When using the heater, the AC switch should be turned off to prevent the compressor from running while using the heater, causing additional fuel consumption during heating.
20
2
Share

What is the Principle of a Pull-Back Car?

The principle of a pull-back car is that the axle transmits force to the pull-back gear to perform work, and the gear drives the pull-back gear. Design of the pull-back car: Through the axle transmitting force to the pull-back gear to perform work, the gear-driven pull-back gear structure converts the kinetic energy from hand motion into potential energy. The pull-back car is designed for rear-wheel forward drive, and the pull-back gear is designed for backward rotation to store energy. Due to the fixed direction of the axle, as long as the energy stored in the pull-back gear is sufficient or the static friction between the car and the ground is small enough, the pull-back car can move forward by the energy output from the pull-back gear, which acts as its heart. Difference between an inertia car and a pull-back car: An inertia car can move both forward and backward because it has a flywheel device, while a pull-back car can only move in a fixed, single direction.
6
4
Share

What does the OBD light indicate?

OBD light indicates there is an issue with the vehicle's electronic control system or exhaust emissions. The specific condition needs to be checked by professionals at a repair shop or 4S dealership. OBD refers to On-Board Diagnostics system, which consists of a scanner, oscilloscope, and interface. It automatically diagnoses vehicle conditions and sends fault codes to maintenance personnel, enabling them to quickly locate the fault. If the vehicle's OBD interface is occupied, it is generally only used as a power source and will not affect the vehicle itself, as peripheral devices only read the data from the vehicle's computer via the OBD interface without writing programs. Moreover, OBD systems have self-protection functions; writing programs requires entering the correct password. Generally, for safety reasons, it is advisable not to arbitrarily occupy the vehicle's OBD interface.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.